Calibration and validation of the ocean color version-3 product from ADEOS OCTS

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.     

Mechanisms of the southward translation of meddies

Meddies are warm and saline anticyclonic eddies found at the mid-depth of the Mediterranean Outflow in the Eastern North Atlantic. They are observed to move almost southward at average speeds as high as 1.3±0.2 cm s⁻¹. This paper examines a mechanism which accelerates this curious translation to a reasonable speed when combined with nonlinearity and a suitable vertical eddy structure. This mechanism is thepseudo-topographic β effect due to the westward decrease in the thickness of the mid-layer induced by the surface southward mean current. The linear dispersion relation including this effect is shown to account for a quarter of the surface southward mean current or a fifth of the observed southward translation of meddies. Three-layer quasi-geostrophic experiments reveal that the surface southward mean current certainly enhances the southward translation velocity of meddies to a speed in agreement with observation, if the meddy has a current structure of plausible intensity and vertical coherence. In the light of the current-induced pseudo-topographic β effect, previous hypotheses are also re-examined through dynamic arguments together with numerical experiments; they are suggested to have some difficulty either in dynamics or in correspondence with observation. Thus the nonlinear effect due to secondary eddies combined with thecurrent-induced pseudo-topographic β effect is the most likely mechanism responsible for the rapid southward translation of meddies among those examined in the paper.     

Polymetallic Mineralization at the Shin-Ohtoyo Deposit, Harukayama District, Hokkaido, Japan

Abstract: The Shin-Ohtoyo Cu–Au deposit is located in the Harukayama district, 20 km west of Sapporo, Hokkaido, Japan. Both acid-type disseminated and adularia–quartz–type vein Au mineralizations have been recognized within a small distance of less than 500 m in the district. Mineralogical characteristics of sulfide ores from the Shin-Ohtoyo deposit have been proved to be polymetallic. Ore minerals containing Sn, V, Bi and Te are recognized. Nine ore types are recognized in terms of characteristic mineral assemblage; (1) chalcedonic quartz veinlets in silicified zone around the deposit, (2) bismuthinite, emplectite, friedrichite and tetrahedrite, (3) an unnamed Cu–Sn–Fe–Zn sulfide, colusite-series minerals, stannoidite, emplectite and tetrahedrite, (4) bournonite, Se-bearing galena and tetrahedrite, (5) luzonite/famatinite and Ag-bearing tetrahedrite, (6) colusite-series minerals, emplectite, aikinite and tetrahedrite/goldfieldite, (7) luzonite/famatinite, colusite-series minerals, mawsonite and tetra–hedrite/goldfieldite, (8) enargite, luzonite/famatinite and tetrahedrite, and (9) colusite-series minerals and tetrahedrite. The first occurrence of friedrichite and stibiocolusite from Japan are reported. The chemical formula of the unnamed phase corresponds to Cu₆(Cu, Fe, Zn)Sn₃S₁₀. Sulfur isotopic ratios (δ³⁴S) of sulfides from the stockpile range from –0. 5% to +1. 9%, and those from drill cores recovered by Metal Mining Agency of Japan (MMAJ) vary from –2. 7% to +0. 8%. Sulfur isotopic ratio of barite in a cavity in the silicified tuff breccia collected from the stock pile yields +27. 1%, while that of barite collected from MMAJ core is +21. 7%. Sulfur isotopic thermometry applied for a pair of barite (+21. 7%) and associated pyrite (+1. 8%) indicates about 300°C. High–Te tetrahedrite composition from both the chalcedonic quartz vein in the silicified zone around the Shin-Ohtoyo deposit and the polymetallic sulfide ores from the adit of the deposit, suggests that the Au mineralization in the former is attributed to a hydrothermal system marginal to the polymetallic mineralization.     

Bottom pressure change associated with the 2004–2005 large meander of the Kuroshio south of Japan

A large meander of the Kuroshio was generated in the region off the southern coast of Japan in August 2004 and continued until approximately July 2005. The formation and decay of the large-meander (LM) path was observed by bottom pressure (BP) sensors installed on inverted echo sounders (PIESs) and a seismic observing system off Shikoku. The variation in BP was examined focusing on the development, persistence, and decay of the LM path. The BP was found to be depressed associated with a Kuroshio path disturbance, called a small meander, and this BP depression led the sea surface height (SSH) depression by up to approximately two months. The temporal phase shift between the sea surface and deep disturbances was significantly greater than those of other small meanders that did not develop into large meanders. After the formation of the LM path, the BP beneath the Kuroshio increased with a lag of approximately two months behind the SSH elevation along with the upward displacement of the main thermocline. The increase in BP is associated with that of the positive southward BP gradient anomaly, i.e., the eastward deep Kuroshio current anomaly, which suggests an enhancement of the topographic steering and stability of the LM path. This is consistent with the fact that no small meanders occurred in the early LM period from late July 2004 to late January 2005.     

A new occurrence of retrogressed eclogite from the Sanbagawa belt of southwest Japan and its significance

The present paper reports, for the first time, the occurrence of an omphacite‐bearing mafic schist from the Asemi‐gawa region of the Sanbagawa belt (southwest Japan). The mafic schist occurs as thin layers within pelitic schist of the albite–biotite zone. Omphacite in the mafic schist only occurs as inclusions in garnet, and albite is the major Na phase in the matrix, suggesting that the mafic schist represents highly retrogressed eclogite. Garnet grains in the sample show prograde‐type compositional zoning with no textural or compositional break, and contain mineral inclusions of omphacite, quartz, glaucophane, barroisite/hornblende, epidote and titanite. In addition to the petrographic observations, Raman spectroscopy and focused ion beam system–transmission electron microscope analyses were used for identification of omphacite in the sample. The omphacite in the sample shows a strong Raman peak at 678 cm^?1, and concomitant Raman peaks are all consistent with those of the reference omphacite Raman spectrum. The selected area electron diffraction pattern of the omphacite is compatible with the common P2/n omphacite structure. Quartz inclusions in the mafic schist preserve high residual pressure values of Δω₁ > 8.5 cm^?1, corresponding to the eclogite facies conditions. The combination of Raman geothermobarometries and garnet–clinopyroxene geothermometry gives peak pressure–temperature (P–T) conditions of 1.7–2.0 GPa and 440–540 °C for the mafic schist. The peak P–T values are comparable to those of the schistose eclogitic rocks in other Sanbagawa eclogite units of Shikoku. These findings along with previous age constraints suggest that most of the Sanbagawa schistose eclogites and associated metasedimentary rocks share similar simple P–T histories along the Late Cretaceous subduction zone.     

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.     

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.     

Volume transports proceeding to the Kuroshio Extension region and recirculating in the Shikoku Basin

The volume transport of the Kuroshio, the western boundary current of the North Pacific subtropical gyre, varies vigorously due to merging of disturbances propagating from the entire North Pacific. Taking into account the recirculation in the Shikoku Basin by the zonal observation line at 30°N to the west of the Izu–Ogasawara Ridge, we estimated the volume transport in the top 1,000 m layer toward the Kuroshio Extension region. The volume transport of the local recirculation gyre in the Shikoku Basin increases associated with the westward extension of the gyre, particularly in the period of the large meandering path of the Kuroshio south of Japan. Meanwhile, most of the transport variations toward the Kuroshio Extension region correspond to those of the Kuroshio transport on the continental slope south of Japan, which vary independently of those of the recirculation gyre.     

Large ageostrophic currents in the abyssal layer southeast of Kyushu, Japan, by direct measurement of LADCP

With full-depth LADCP velocity data collected in a wide area southeast of Kyushu, Japan, large velocity currents, occasionally exceeding 15 cm s^?1, were observed in a thick, 500–1,500 m, near-homogeneous density layer below approximately 3,000 m depth around the steep topographies. The currents were found not to flow along the topographic contours, and to be strongly ageostrophic. The directions of the bottom-layer currents are rather related with phase of the semi-diurnal tides, suggesting deeply intruded internal tides generated at the steep topographies.