A 35 kyr record of organic matter composition and δ13C of n-alkanes in bog sediments close to Lake Baikal: Implications for paleoenvironmental studies

We characterized the compositions of organic compounds in a Cheremushka bog sediment core (deposited over the last 35 kyr), located at the eastern coast of Lake Baikal, to obtain basic information about the terrestrial organic matter (OM) which contributed to Lake Baikal sediments. The bog sediment was analyzed for the molecular composition of n-alkanes, lignin phenols and n-C₂₄ to C₃₀ alkanoic acids, as well as the carbon isotopic composition of plant wax derived n-C₂₇ to C₃₃ alkanes.Concentrations of lignin phenols [vanillyl (V) plus syringyl (S) phenols] normalized to total organic carbon (TOC) in the Holocene are twice those for the last glacial maximum (LGM), while concentrations of TOC-normalized n-C₂₄ to C₃₀ alkanoic acids do not change markedly in this period. Thus, the ratio of lignin phenols to n-C₂₄ to C₃₀ alkanoic acids increases from the LGM to the Holocene. This result is essentially consistent with pollen analysis indicating an expansion of woody plants in the Holocene and a prevailing herb-abundant environment for the LGM. The δ¹³C values of n-C₂₇ to C₃₃ alkanes (e.g. ?29‰ to ?33‰ for C₃₁) indicate the presence of C₃-dominant plants throughout the core.The contribution of terrestrial OM to Lake Baikal sediments was estimated using the biomarkers, on the assumption that the OM in the bog sediments is a representative of the terrestrial OM around the lake. Hence, the estimation using lignin phenol or n-C₂₄ to C₃₀ alkanoic acid parameters indicates that 11–24% of the TOC in the Academician Ridge sediments is land-derived for both the Holocene and the LGM, which is similar to the estimates from C/N values of bulk OM. However, the estimates for terrestrial OM using the n-C₂₇ to C₃₃ alkane parameter are generally higher than those using lignin phenol or n-C₂₄ to C₃₀ alkanoic acid parameters. The difference is thought to be associated with the difference in source and behavior of these biomarkers.     

Double-planed deep seismic zone and anomalous structure in the upper mantle beneath northeastern Honshu (Japan)

Seismicity located by using the most recent data obtained from the high-gain seismograph network of Tohoku University shows that the deep seismic zone beneath northeastern Honshu, Japan, is composed of two thin planes which are parallel to each other and are 30–40 km apart. Focal mechanisms derived from the earthquakes in the upper plane are reverse-faulting, or, some of them, down-dip compression. As a contrast, those in the lower plane are down-dip extension. The location of the upper boundary of the descending lithospheric slab, inferred from the arrival-time difference between ScS and ScSp waves and from the travel-time anomaly of intermediate-depth earthquakes observed at the small-scale seismic array, coincides exactly with the upper plane of the double-planed deep seismic zone. Anelasticity (1/Q) structure of the upper mantle consists of three distinct zones: a high-Q (Qs− 1500) inclined lithospheric slab, an intennediate-Q (Qs−350) land-side mantle between the Pacific coast and the volcanic front, and a low-Q (Qs − 100) land-side mantle between the volcanic front and the coast of the Japan Sea.The evidence obtained here provides valuable information as to the definition of the type of mechanism producing the plate motion beneath island arcs.     

Genesis of the Mamut Porphyry Copper Deposit, Sabah, East Malaysia

Abstract: The Mamut deposit of Sabah, East Malaysia, is a porphyry type Cu‐Au deposit genetically related to a quartz monzonite (“adamellite”) porphyry stock associated with upper Miocene Mount Kinabalu plutonism. The genesis of the Mamut deposit is discussed based on petrology of the intrusives in the Mount Kinabalu area combined with ore– and alteration–petrography, fluid inclusion and sulfur isotope studies. Groundmass of the adamellite porphyry at Mamut is rich in K which suggests vapor transport of alkaline elements during the mineralizing magmatic process, while the groundmass of the post‐ore “granodiorite” porphyry at Mamut contains small amounts of normative corundum suggesting depletion in alkaline elements at the root zone of the magma column. Sub‐dendritic tremolitic amphibole rims on hornblende phenocrysts in the Mamut adamellite porphyry suggest interaction between the mineralizing magma and the exsolved fluids. Occurrences of clinopyroxene microphenocrysts and pseudomor‐phic aggregates of shredded biotite and clinopyroxene after hornblende phenocrysts in the barren intrusives imply lower water fugacity and decreasing in water fugacity, respectively. Compositional gap between the core of hornblende phenocrysts and the tremolitic amphibole rims and those in the groundmass of the Mamut adamellite porphyry suggests a decrease in pressure. Higher X_Mg (=Mg/(Mg+Fe) atomic ratio) in the tremolitic amphibole rims in the Mamut adamellite porphyry compared to those of the barren intrusions suggests high oxygen fugacity. High halogen contents of igneous hydrous minerals such as amphiboles, biotite and apatite in the Mamut adamellite porphyry suggest the existence of highly saline fluids during the intrusion and solidification of the mineralizing magma. Fluid inclusions found in quartz veinlet stockworks are characterized by abundant hypersaline polyphase inclusions associated with subordinate amounts of immiscible gaseous vapor. Both Cu and Au are dispersed in disseminated and quartz stockwork ores. Chalcopyrite and pyrrhotite as well as magnetite are the principal ore minerals in the biotitized disseminated ores. Primary assemblage of intermediate solid solution (iss) and pyrrhotite converted to the present assemblage of chalcopyrite and pyrrhotite during cooling. Subsequent to biotitization, quartz veinlet stockworks formed associated with retrograde chlorite alteration. The Cu‐Fe sul–fides associated with stockwork quartz veinlet are chalcopyrite and pyrite. Overlapping Pb and Zn and subsequent Sb mineralizations were spatially controlled by NNE‐trending fractures accompanying the phyllic and advanced argillic alteration envelope. Sulfur isotopic composition of ore sulfides are homogeneous (about +2%) throughout the mineralization stages. These are identical to those of the magmatic sulfides of Mount Kinabalu adamellitic rocks.     

Metallogenesis of Porphyry Cu Deposits of the Western Luzon Arc, Philippines: K-Ar ages, SO3 Contents of Microphenocrystic Apatite and Significance of Intrusive Rocks

Abstract: K–Ar ages of the following porphyry Cu deposits in the western Luzon arc are determined: Lobo-Boneng (10.50.4 Ma), Santo Niño (9.50.3 Ma), Black Mountain (2.10.1 Ma), Dizon (2.50.2 Ma) and Taysan (7.30.2 Ma). Microphenocrys-tic apatite in the late Cenozoic intermediate to silicic intrusions associated with porphyry Cu deposits in the western Luzon arc contains sulfur as SO₃ detectable by electron probe microanalyzer. Sulfur is supposed to have been accommodated dominantly as oxidized species in oxidizing hydrous magmas that generated porphyry Cu deposits. Likewise, such high SO₃ contents in microphenocrystic apatite are common characteristics of the intermediate to silicic magmatism of the western Luzon arc, from tonalitic rocks of the Luzon Central Cordillera of about 15 Ma to an active magmatism at Mount Pinatubo. Thus, the western Luzon arc has been generating porphyry Cu mineralization associated with oxidizing hydrous intermediate to silicic magmatism related to eastward subduction, since Miocene to the present day. Intermediate to silicic rocks since 15 Ma to present-day western Luzon arc generally show high whole-rock Sr/Y ratio ranging from 20 to 184. However, porphyry Cu deposit is not necessarily related to the rocks that show higher Sr/Y ratios compared to the other barren rocks in the western Luzon arc. The characteristics of the intermediate to silicic magma associated with porphyry Cu deposit are not attributed to the composition of the source material of the magma, but to the properties defined by the high activity of oxidized species of sulfur in the fluid phase that is encountered during the generation of intermediate to silicic magmas.     

Dendritic cordierite in argillaceous hornfels from the Toki area,Gifu Prefecture,central Japan

Dendritic cordierite occurs in argillaceous hornfels from the Toki area, Gifu Prefecture, Japan. The cordierite crystal consists of c-arms elongated parallel to the c-axes and a-arms perpendicular to the c-axis. The latter arms could be divided into six kinds of untwinned a-arms with different growth directions elongated parallel to the respective a-axis and twinned a-arms elongated parallel to the (110) twin plane. A-arms branch out from c-arms or other a-arms with different growth directions and c-arms sometimes branch out from a-arms, leading to a tree-like structure. Each of the c-arms contains three kinds of domains related by a three-fold axis about the c-axis. These domains are irregularly distributed without any relation to the shape of the c-arm and the domain boundaries are of zigzag shape. This domain arrangement suggests that c-arms grew as hexagonal cordierite and were later transformed into orthorhombic cordierite. The fact that each untwinned a-arm has a fixed growth direction to its orientation suggests that the a-arms grew as an orthorhombic cordierite. From the growth directions of c- and a-arms, orthorhombic and hexagonal phases are considered to grow preferentially along the c- and a-axes, respectively. The branching of a new arm is explained by nucleation on an old arm with a different preferred growth direction. The preferential growth is discussed in terms of a significant chemical potential gradient of the cordierite component. This has been preserved in the mineral zoning observed in the matrix around the cordierite porphyroblast.     

Polymetallic Mineralization at the Shin-Ohtoyo Deposit, Harukayama District, Hokkaido, Japan

Abstract: The Shin-Ohtoyo Cu–Au deposit is located in the Harukayama district, 20 km west of Sapporo, Hokkaido, Japan. Both acid-type disseminated and adularia–quartz–type vein Au mineralizations have been recognized within a small distance of less than 500 m in the district. Mineralogical characteristics of sulfide ores from the Shin-Ohtoyo deposit have been proved to be polymetallic. Ore minerals containing Sn, V, Bi and Te are recognized. Nine ore types are recognized in terms of characteristic mineral assemblage; (1) chalcedonic quartz veinlets in silicified zone around the deposit, (2) bismuthinite, emplectite, friedrichite and tetrahedrite, (3) an unnamed Cu–Sn–Fe–Zn sulfide, colusite-series minerals, stannoidite, emplectite and tetrahedrite, (4) bournonite, Se-bearing galena and tetrahedrite, (5) luzonite/famatinite and Ag-bearing tetrahedrite, (6) colusite-series minerals, emplectite, aikinite and tetrahedrite/goldfieldite, (7) luzonite/famatinite, colusite-series minerals, mawsonite and tetra–hedrite/goldfieldite, (8) enargite, luzonite/famatinite and tetrahedrite, and (9) colusite-series minerals and tetrahedrite. The first occurrence of friedrichite and stibiocolusite from Japan are reported. The chemical formula of the unnamed phase corresponds to Cu₆(Cu, Fe, Zn)Sn₃S₁₀. Sulfur isotopic ratios (δ³⁴S) of sulfides from the stockpile range from –0. 5% to +1. 9%, and those from drill cores recovered by Metal Mining Agency of Japan (MMAJ) vary from –2. 7% to +0. 8%. Sulfur isotopic ratio of barite in a cavity in the silicified tuff breccia collected from the stock pile yields +27. 1%, while that of barite collected from MMAJ core is +21. 7%. Sulfur isotopic thermometry applied for a pair of barite (+21. 7%) and associated pyrite (+1. 8%) indicates about 300°C. High–Te tetrahedrite composition from both the chalcedonic quartz vein in the silicified zone around the Shin-Ohtoyo deposit and the polymetallic sulfide ores from the adit of the deposit, suggests that the Au mineralization in the former is attributed to a hydrothermal system marginal to the polymetallic mineralization.     

泰国北部三叠系Lampang群Doi Long组的有孔虫组合与沉积环境

A rich foraminiferal assemblage, consisting of abundant Aulotortus sinuosus and A. tumidus in association with Lamelliconus multispirus, Endoteba ex gr. controversa, E. ex gr. badouxi, Endotebanella kocaeliensis, Endotriada tyrrhenica, Endotriadella wirzi, Malayspirina fontainei, Ammobaculites rhaeticus, Diplotremina astrofimbriata, Agathammina austroalpina, and others, was found in the Doi Long Formation of the Triassic Lampang Group, Northern Thailand. These foraminifers suggest that the formation is referable to the Carnian (early Late Triassic), which is consistent with the age estimated by ammonoids. In microfacies, peloidal grainstone, bioclastic grainstone, sponge-microbial boundstone, and oolitic grainstone were recognized in the Doi Long Formation. Based on microfacies, three depositional facies, the lagoon facies, reef facies, and shoal facies, are recognized in this formation. These lines of evidence are suggestive that the Doi Long Formation was deposited in a reef or bank setting rather than a ramp setting.     

Sea navigation, challenges and potentials in South East Asia: an assessment of suitable sites for a shipping canal in the South Thai Isthmus

This paper discusses the situation of sea navigation in south East Asia focusing on the Strait of Malacca. The strait links the Indian and Pacific oceans, which is considered one of the busiest in several narrow channels around the world. The paper highlights the significance of the strait to global maritime trade, volume of traffic, and rising environmental and social consequences in the strait. A feasibility study of constructing a new shipping canal in the South Thai Kra Isthmus as an alternative option of Malacca route had been studied since 19th century. The paper explores suitable sites for a potential shipping canal in the Kra Isthmus using physiographic spatial data i.e., elevation, sea charts, geology, soils and river systems. Each spatial data was considered as a separate decision variable for site evaluation. Separate evaluation criterions were prepared for each variable based on shipping canal requirements. Overlaying the maps in GIS environment, the variables were carefully evaluated, and five geographic sites for the canal were derived. The length of the shipping canal over sea and land was computed for each site. Site B located in south of Ranong and Chumphon provinces, was the shortest one, whereas site C in Surat Thani, Pangnna and Krabi provinces was the longest. However, each site consisted of benefits and constraints.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.