Double-planed deep seismic zone and anomalous structure in the upper mantle beneath northeastern Honshu (Japan)

Seismicity located by using the most recent data obtained from the high-gain seismograph network of Tohoku University shows that the deep seismic zone beneath northeastern Honshu, Japan, is composed of two thin planes which are parallel to each other and are 30–40 km apart. Focal mechanisms derived from the earthquakes in the upper plane are reverse-faulting, or, some of them, down-dip compression. As a contrast, those in the lower plane are down-dip extension. The location of the upper boundary of the descending lithospheric slab, inferred from the arrival-time difference between ScS and ScSp waves and from the travel-time anomaly of intermediate-depth earthquakes observed at the small-scale seismic array, coincides exactly with the upper plane of the double-planed deep seismic zone. Anelasticity (1/Q) structure of the upper mantle consists of three distinct zones: a high-Q (Qs− 1500) inclined lithospheric slab, an intennediate-Q (Qs−350) land-side mantle between the Pacific coast and the volcanic front, and a low-Q (Qs − 100) land-side mantle between the volcanic front and the coast of the Japan Sea.The evidence obtained here provides valuable information as to the definition of the type of mechanism producing the plate motion beneath island arcs.     

Measurement of lower-stratospheric aerosol by a balloon-borne photometer

Height distribution of the stratospheric aerosol extinction coefficient was measured in the altitude range 10 to 20 km by a balloon-borne multi-color sunphotometer in May 1978. It is demonstrated that detailed structures of the distribution of stratospheric aerosol can be remotely measured by the solar occultation method as well as by lidar andin situ particle counter observations. In the aerosol layer appearing at 18 km altitude the extinction coefficient at 800–1000 nm wavelength reached to 3×10^–7 m^–1, which was reasonable compared with lidar observations. Wavelength dependence of the aerosol optical depth was crudely estimated to be proportional to ^–1.5.     

Application of laser ablation ICPMS to trace the environmental history of chum salmon Oncorhynchus keta

Trace element levels in otoliths of chum salmon Oncorhynchus keta were examined by means of laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). A close linear relationship in the Sr:Ca ratios between EPMA (X-ray analysis with an electron microprobe) and LA-ICPMS analyses was found (p<0.0001), suggesting that the latter technique could be used to separate the marine and freshwater life phases. Mg:Ca, Cr:Ca, Zn:Ca and Ba:Ca ratios in either the core region or the oceanic growth zone of the otoliths varied among sites. These differences suggest that elemental compositions may reflect environmental variability among spawning (breeding) or habitat sites. Thus, those element ratios demonstrate the potential to be used to distinguish between fish spawning (breeding) sites and habitats for this species of salmon.     

Future projections of Indian Summer Monsoon under multiple RCPs using a high resolution global climate model multiforcing ensemble simulations

Climate Dynamics - Present-day simulations (1983–2003) of a global climate model of 60-km resolution with three deep convection schemes are analysed to find the best scheme for simulation of...     

The K-band Hubble diagram of submillimetre galaxies and hyperluminous galaxies

We present the K -band Hubble diagrams ( K – z relations) of submillimetre-selected galaxies and hyperluminous galaxies (HLIRGs). We report the discovery of a remarkably tight K – z relation of HLIRGs, indistinguishable from that of the most luminous radio galaxies. Like radio galaxies, the HLIRG K – z relation at   z ≲ 3  is consistent with a passively evolving ∼3 L _* instantaneous starburst starting from a redshift of   z ∼ 10  . In contrast, many submillimetre-selected galaxies are ≳2 mag fainter, and the population has a much larger dispersion. We argue that dust obscuration and/or a larger mass range may be responsible for this scatter. The galaxies so far proved to be hyperluminous may have been biased towards higher AGN bolometric contributions than submillimetre-selected galaxies due to the 60-μm selection of some, so the location on the K – z relation may be related to the presence of the most massive active galactic nucleus. Alternatively, a particular host galaxy mass range may be responsible for both extreme star formation and the most massive active nuclei.     

Impact fragmentation experiments of basalts and pyrophyllites

Results of impact fragmentation experiments for basalts and pyrophyllites are reported. Aluminum cylindrical projectiles were impacted on cubic basalt and pyrophyllite targets at velocities of 70 to 990 m/sec. The targets and projectiles were 20 g to 3.3 kg and 2 to 20 g in weight respectively. Weights of the fragments produced by impacts were measured and the size distributions of fragments were examined. Data of the largest fragment mass (m_L) normalized to the original target mass (M_t), m_L/M_t, correlate better with the nondimensional impact stress, P_I, a new scaling parameter introduced by H. Mizutani, Y. Takagi, and S. Kawakami (1984, in preparation) than the conventional projectile's kinetic energy per unit target mass, E/M_t, used in the previous studies. All the m_L/M_t data for basalts obtained in the present study are summarized by m_L/M_t = 2.95 × 10^?2P_I^?1 where P_I = P₀L³/YR³, P₀ = peak shock pressure, L = projectile size, R = target size and Y = material strength of target. For aluminum targets, however, the m_L/M_t is 2.5 orders of magnitude larger than that for brittle targets at impacts with the same P_I. Size distributions of fragments expressed in a log N - log (m/M_t) diagram divided into three regimes bounded by two inflection points. In each regime the curve is expressed by $\text{N (>}\text{m}\text{M}{}_{\mathrm{t}}\text{) = A (}\text{m}\text{M}{}_{\mathrm{t}}\text{)}{}^{\mathrm{?a}}$. The slopes, a, of the log $\text{N -}\text{log}\text{(}\text{m}\text{M}{}_{\mathrm{t}}\text{)}$ curves in the regimes of a large and a medium size range are positively correlated with the nondimensional impact stress, P_I, and expressed as a = C₃ + a₃log P_I. The slopes, a, in the smallest size range are, on the other hand, nearly constant and have values of $\text{0.5}\text{to}\text{0.7 (}\text{1}\text{2}\text{?}\text{2}\text{3}\text{)}$. Present results indicate that the impact fragmentation is scaled well by the new scaling parameter, P_I, of Mizutani, Takagi, and Kawakami and that the present experimental data may shed new light on planetary impact processes.     

Automated cloud tracking system for the Akatsuki Venus Climate Orbiter data

Japanese Venus Climate Orbiter, Akatsuki, is cruising to approach to Venus again although its first Venus orbital insertion (VOI) has been failed. At present, we focus on the next opportunity of VOI and the following scientific observations.We have constructed an automated cloud tracking system for processing data obtained by Akatsuki in the present study. In this system, correction of the pointing of the satellite is essentially important for improving accuracy of the cloud motion vectors derived using the cloud tracking. Attitude errors of the satellite are reduced by fitting an ellipse to limb of an imaged Venus disk. Next, longitude–latitude distributions of brightness (cloud patterns) are calculated to make it easy to derive the cloud motion vectors. The grid points are distributed at regular intervals in the longitude–latitude coordinate. After applying the solar zenith correction and a highpass filter to the derived longitude–latitude distributions of brightness, the cloud features are tracked using pairs of images. As a result, we obtain cloud motion vectors on longitude–latitude grid points equally spaced. These entire processes are pipelined and automated, and are applied to all data obtained by combinations of cameras and filters onboard Akatsuki. It is shown by several tests that the cloud motion vectors are determined with a sufficient accuracy. We expect that longitude–latitude data sets created by the automated cloud tracking system will contribute to the Venus meteorology.     

Determination of Molybdenum, Antimony and Tungsten at sub μg g−1 Levels in Geological Materials by ID-FI-ICP-MS

We have developed a rapid and accurate method for the determination of Mo, Sb and W in geological samples using isotope dilution inductively coupled plasma-mass spectrometry with a flow injection system (ID-FI-ICP-MS). The chemical procedure requires HF digestion of the sample with a Mo-Sb-W mixed spike, subsequent evaporation and dissolution of Mo, Sb and W from Mg and Ca fluorides with HF. Recovery yields of Mo, Sb and W in the extraction were > 94% for samples of peridotite, basalt and andesite composition, with the exception of W in samples of peridotite composition for which recovery was 81%. No matrix effects were observed in the determination of the isotope ratios of Mo, Sb and W in solutions prepared from peridotite, basalt and andesite samples down to a dilution factor of 100. Detection limits of Mo, Sb and W in silicate materials were at the several ng g⁻¹ level. Analysis of the silicate reference materials PCC-1, DTS-1, BCR-1, BHVO-1, AGV-1 from the US Geological Survey and JP-1, JB-1, -2, -3, JA-1, -2, and -3 from the Geological Survey of Japan as well as the Smithsonian reference Allende powder yielded reliable Mo, Sb and W concentrations. The repeatability in the analysis of basalts and andesites was < 9%. This technique requires only 0.2 ml sample solution, and is therefore suitable for analyzing small and/or precious samples such as meteorites, mantle peridotites and their mineral separates.