A 100 m laser strainmeter system installed in a 1 km deep tunnel at Kamioka, Gifu, Japan

We have installed a laser strainmeter system in a deep tunnel about 1,000 m below the ground surface at Kamioka, Gifu, Japan. The system consists of three types of independent interferometers: (1) an EW linear strainmeter of the Michelson type with unequal arms, (2) an NS-EW differential strainmeter of the Michelson type with equal arms and (3) a NS absolute strainmeter of the Fabry–Perot type. These are configured in L-shaped vacuum pipes, each of which has a length of 100 m. (1) and (2) are highly sensitive (order of 10⁻¹³ strain) and have wide dynamical range (10⁻¹³–10⁻⁶). Observations with strainmeters (1) and (2) started on June 11, 2003. (3) is a new device for absolute-length measurements of the order of 10⁻⁹ of a long-baseline (100 m) Fabry–Perot cavity by the use of phase-modulated light. This third strainmeter will be ready for operation before the end of 2004. The laser source of strainmeters (1) and (2) is a frequency-doubled YAG laser with a wavelength of 532 nm. The laser frequency is locked onto an iodine absorption line and a stability of 2 × 10⁻¹³ is attained. The light paths of the laser strainmeter system are enclosed in SUS304 stainless steel pipes. The inside pressure is kept to be 10⁻⁴ Pa. Consequently, quantitative measurement of crustal strains of the order of 10⁻¹³ can be attained by employing the laser strainmeter system of (1) and (2) at Kamioka. This resolving power corresponds to that of a superconducting gravimeter. Using the laser strainmeter system, we expect to determine parameters related to fluid core resonance, core modes and core undertone as well as other geodynamic signals such as slow strain changes caused by silent earthquakes or slow earthquakes.     

The X-ray jet and lobes of PKS 1354+195 (=4C 19.44)

We present a Chandra image of the quasar, jet, and lobes of PKS 1354+195 (=4C 19.44). The radio jet is 18 arcsec long, and appears to be very straight. The length gives many independent spatial resolution elements in the Chandra image while the straightness implies that the geometrical factors are constant along the jet although their values are uncertain. We also have 4 frequency radio images with half to one arcsecond angular resolution, and use HST and Spitzer data to study the broad band spectral energy distributions. The X-ray and radio spectra are both consistent with a spectrum f _ν ∝ ν ^−0.7 for the integrated jet. Using that spectral index, the model of inverse Compton scattering of electrons on the cosmic microwave background (IC/CMB) gives magnetic field strengths and Doppler factors that are relatively constant along the jet. Extended X-ray emission is evident in the direction of the otherwise unseen counter-jet. X-ray emission continues past the radio jet to the South, and is detected within both the southern and northern radio lobes.     

Restitution coefficients and sticking velocities of a chondrule analogue colliding on a porous silica layer at impact velocities between 0.1 and 80 m s−1

To study the accretional growth of rimmed chondrules and their agglomerates in the solar nebula, we measured the restitution coefficients, ε, and the sticking velocities to a porous silica layer, v_c, by impacting the silica layer with a glass ball at velocities from 0.1 to 80 m s^?1. We used a porous silica layer covering a basalt block with thicknesses ranging from 1/5 of the glass ball radius to equal to the glass ball radius as a rimmed chondrule analogue, and the porosity of the silica layer was set to be 70%, 80%, 85%, and 90%. Collisional experiments were conducted by means of the free fall method or by the use of a spring gun or a gas gun, allowing us to vary the impact velocity. We used a laser displacement meter to estimate the impact and rebound velocities as well as the acceleration during the collision at impact velocities below 1 m s^?1. As a result, the sticking velocity, v_c, of 90%- and 85%- porosity layers with a thickness equal to 1/2 of the glass ball diameter was 0.44 and 2.4 m s^?1, respectively. On the other hand, we found a distinct barrier to sticking for smaller-porosity layers: the silicate layer with a porosity smaller than 80% never exhibited sticking at any impact velocity below 1 m s^?1. Instead, we observed a rebound effect with restitution coefficients larger than 0.2. In the case of a silica layer with a porosity smaller than 80%, we observed the sub-sticking condition defined by ε < 0.1 at velocities extending from 5 m s^?1 to 70 m s^?1.     

Long-range transport of particulate polycyclic aromatic hydrocarbons at Cape Hedo remote island site in the East China Sea between 2005 and 2008

Particle-associated polycyclic aromatic hydrocarbons (PAHs) in outflow from East Asia were observed at Cape Hedo, Okinawa, Japan between 2005 and 2008. The filter samples of the total suspended particles were analyzed by means of gas chromatography-mass spectrometry. The total concentration of fourteen 3–7-ring PAHs was 0.01–24 ng m^?3 (average 1.6 ng m^?3). The average PAH concentration increased in the winter-spring season and decreased in the summer-fall season. The average benzo(a)pyrene to benzo(e)pyrene ratio was 0.49 in the winter-spring season and was lower than the literature values for East Asian cities in the same season. This result shows that aging of organic aerosol particles proceeds during long-range transport from East Asia. In the Asian Pacific region, these pollutants are transported from East Asia in the winter-spring season, whereas clean air mass is transported from the Pacific Ocean in the summer-fall season.     

Petrological variation of large-volume felsic magmas from Hakkoda-Towada caldera cluster: Implications for the origin of high-K felsic magmas in the Northeast Japan Arc

Abstract The Hakkoda‐Towada caldera cluster (HTCC) is a typical Late Cenozoic caldera cluster located in the northern part of the Northeast Japan Arc. The HTCC consists of five caldera volcanoes, active between 3.5 Ma and present time. The felsic magmas can be classified into high‐K (HK‐) type and medium‐ to low‐K (MLK‐) type based on their whole‐rock chemistry. The HK‐type magmas are characterized by higher K₂O and Rb contents and higher ⁸⁷Sr/⁸⁶Sr ratios than MLK‐type magmas. Both magmas cannot be derived from fractional crystallization of any basaltic magma in the HTCC. Assimilation‐fractional crystallization model calculations show that crustal assimilation is necessary for producing the felsic magmas, and HK‐type magmas are produced by higher degree of crustal assimilation with fractional crystallization than MLK‐type magmas. Although MLK‐type magmas were erupted throughout HTCC activity, HK‐type magmas were erupted only during the initial stage. The temporal variations of magma types suggest the large contribution of crustal components in the initial stage. A major volcanic hiatus of 3 my before the HTCC activity suggests a relatively cold crust in the initial stage. The cold crust probably promoted crustal assimilation and fractional crystallization, and caused the initial generation of HK‐type magmas. Subsequently, the repeated supply of mantle‐derived magmas raised temperature in the crust and formed relatively stable magma pathways. Such a later system produced MLK‐type magmas with lesser crustal components. The MLK‐type magmas are common and HK‐type magmas are exceptional during the Pliocene–Quaternary volcanism in the Northeast Japan Arc. This fact suggests that exceptional conditions are necessary for the production of HK‐type magmas. A relatively cold crust caused by a long volcanic hiatus (several million years) is considered as one of the probable conditions. Intensive crustal assimilation and fractional crystallization promoted by the cold crust may be necessary for the generation of highly evolved HK‐type felsic magmas.     

Cenomanian (Upper Cretaceous) carbon isotope stratigraphy of terrestrial organic matter for the Yezo Group, Hokkaido, Japan

Abstract Carbon isotope fluctuations of sedimentary organic matter along the two geological traverses in the Yezo Group, Hokkaido, northern Japan, elucidate a detailed chemostratigraphy for the Cenomanian Stage on the northwestern Pacific margin. Visual characterization of the kerogen from mudstone samples shows that the major constituents of sedimentary organic matter originated as terrestrial higher plants. The atomic hydrogen/carbon ratios of the kerogen suggest that the original δ¹³C values of terrestrial organic matter (TOM) have not been affected significantly by thermal diagenesis. The patterns in two δ¹³C_TOM curves are similar and independent of changes in lithology and total organic carbon contents, which suggests that TOM was mixed sufficiently before the deposition in the Yezo forearc basin for the δ¹³C composition having been homogenized. In addition, this implies that the Hokkaido δ¹³C_TOM profiles represent the averaged temporal δ¹³C variations of terrestrial higher‐plant vegetation in the hinterlands of northeast Asia during Cenomanian time. Three shorter‐term (ca. 0.1 my duration) positive‐and‐negative δ¹³C_TOM fluctuations of ∼1‰ are present in the Lower to Middle Cenomanian interval in the Yezo Group. On the basis of the age‐diagnostic taxa (ammonoids, inoceramids and planktic foraminifers), these discrete δ¹³C_TOM events are interpreted to be correlated with those in the δ¹³C curves of pelagic carbonates from European basins. The correlation of δ¹³C events between the European and Yezo Group sections suggests that the shorter‐term δ¹³C fluctuations in Cenomanian ocean‐atmosphere carbon reservoirs are useful for global chemostratigraphic correlation of marine strata. In particular, the correlation of δ¹³C fluctuations of the so‐called ‘Mid‐Cenomanian event’ (MCE) implies: (i) the δ¹³C variations of global carbon reservoir during the MCE are precisely recorded in the δ¹³C_TOM records; and (ii) the MCE δ¹³C_TOM event is an efficient chronostratigraphic index for the Lower/Middle Cenomanian boundary of the Mid‐Cretaceous sequences.     

Trench triple junction off Central Japan—preliminary results of French-Japanese 1984 Kaiko cruise, Leg 2

Leg 2 of the French-Japanese 1984 Kaiko cruise has surveyed the trench triple junction off central Japan, where the Japan, Izu-Bonin and Sagami Trenches intersect. The Izu-Bonin Trench is deeper than the Japan Trench and filled by a thick turbiditic series. Its anomalous depth is explained by the westward retreat of the edge of the northwestward moving Philippine Sea plate. On the contrary to what happens in the Japan Trench, horst and graben structures of the Pacific plate obliquely enters the Izu-Bonin Trench, suggesting that the actual boundary between these two trenches is located to the north of the triple junction. The inner wall of the Izu-Bonin Trench is characterized in the triple junction area by a series of slope basins whose occurrence is related to the dynamics of this area. The northernmost basin is overthrust by the edge of the fore-arc area of the Northeast Japan plate. The plate boundary is hardly discernible further east, which makes it impossible to locate precisely the triple junction itself. These features suggest that large intra-plate deformation occurs there due to the interaction of the plates involved in the triple junction and the weak mechanical strength of the wedge-shaped margin of the overriding plates.     

Four intermediate goals: a methodology for evaluation of climate mitigation policy packages

This study aimed to evaluate climate mitigation policy packages in various countries’ nationally determined contributions by introducing four intermediate policy goals: decarbonizing energy, improving energy efficiency, reducing demand for energy services, and enhancing carbon sinks and reducing emissions of non-CO₂ gases. The methodology was examined by using data of China, Germany, Japan, the UK, and the US. Climate mitigation policies introduced between 1990 and 2015 in the five countries were categorized into four intermediate policy goals. Six indicators were introduced to measure actual outcomes, each representing one of the four intermediate policy goals. A comparison between the policy categorizations and the indicator outputs led to the conclusion that the number of policies implemented partially reflects the countries’ efforts to achieve specific policy goals, even though the stringency of each policy was not taken into account. This comparison was also useful in identifying key policies that were effective in achieving policy goals, even if there was a relatively small number of policies. The methodology was useful in generating policy recommendations to fulfil all the four intermediate goals in a balanced manner.

POLICY RELEVANCE

The Paris Agreement, adopted at the 21st Conference of the Parties to the United Nations Framework Convention on Climate Change (COP21) in December 2015, calls for all countries to prepare, communicate, and maintain successive nationally determined contributions (NDCs) and pursue domestic mitigation measures with the aim of achieving the objectives of such contributions (Article 4.2). Under this new regime, methodologies to assess policy implementation have become increasingly important, especially for the post-2020 period. The methodology developed in this study is simple enough for any country to use and was effective in grasping the overall characteristics of the climate mitigation policy package in each country or region studied. The study recommends that the UNFCCC create a rule requesting countries to submit estimates of population, GDP, total energy demand, share of renewables, and other relevant factors for the target year when they submit their successive intended NDCs.     

Mesoscale Reproducibility in Regional Ocean Modelling with a Three-Dimensional Stratification Estimate Based on Aviso-Argo Data

ABSTRACT

For dynamically consistent, high-resolution, yet cost-effective regional oceanic downscaling modelling, an empirical three-dimensional (3D) density estimate based on publicly available datasets is utilized for the Regional Oceanic Modeling System (ROMS) with simple data assimilation (i.e., TS nudging, where TS stands for temperature and salinity). We rely on a method built upon the two-layer model to reconstruct a mesoscale 3D temperature and salinity field, referred to as Tokyo University of Marine Science and Technology (TUMSAT)-TS, using near real-time altimeter-derived dynamic height along with Argo float profiling data. The TUMSAT-TS is first validated using in situ hydrographic data, then is implemented in the Japan Coastal Ocean Predictability Experiment (JCOPE2)-ROMS downscaling system for the Kuroshio region off Japan. We explore the usability of TUMSAT-TS by carrying out three comparative simulations with temperature and salinity nudging towards the (i) TUMSAT-TS and (ii) JCOPE2-TS fields, and (iii) without the nudging. Whereas the unassimilated case fails to properly account for the Kuroshio, both datasets individually are found to help reproduce the mesoscale variability of the Kuroshio, as well as its transient paths, volume transport, associated kinetic energy (KE) and eddy KE, and seasonally varying stratification.