Comparison of TRMM-based flood indices for Gaziantep,Turkey

Floods are the most common natural disasters threatening the welfare of humanity. Gaziantep, a city located in a semi-arid region of Turkey, is occasionally flooded, and in May 2014, a flood not only caused property damage, but also resulted in the death of a lady who became trapped in flood waters. The fatality and property damage of flash floods arise from the limited response time for remediation. Despite improvements in numerical weather predictions, forecasting flash floods is not easy. Due to its frequent observations, Tropical Rainfall Measuring Mission (TRMM) Multi-Satellite Precipitation Analysis (TMPA) real-time (RT) 3B42RT data are tested for Gaziantep flood predictions in this study. During TRMM era, six floods occurred in Gaziantep. Three-hourly 3B42RT data covering the 2000- to 2014-year period indicated high rain rates during months in which floods were observed. Also daily variation of rainfall was well represented. High-intensity rain (HIR), cumulative distribution functions (CDF) and Gaziantep Flood Index (GAFI) indices are developed for flood characterization. HIR, calculated as 10 mm/h, detected October and December of 2010 floods. CDFs with 99, 98.5, 95 and 91.3% indicated 4 floods occurred in August 2005, June 2007, October 2010 and December 2010, respectively. GAFI was able to detect 4 out of 6 occurrences (August 2005, June 2007, October 2010 and December 2010) as values ranging from 1 to 2.63 are selected for monthly precipitation. In the missed occurrence, 3B42RT did not indicate any rainfall. Although only rain rates are used in flood characterization, the results are promising, and the simplicity of the methodology favors its usage. Also, methodology can easily be implemented to TRMM following missions such as Global Precipitation Measurement Mission.     

Contents of Volume 29

Volume Contents

Contents of Volume 29     

Relationships Between Fundamental Seismic Hazard Parameters for the Different Source Regions in Turkey

Turkey has been divided into eight different seismic regions taking into consideration the tectonic environments and epicenters of the earthquakes to examine relationships of the modal values (a/b), the expected maximum magnitudes (M_max) and the maximum intensities (I_max). For this purpose, the earthquakes for the time period 1900–1992 from the Global Hypocenter Data Base CD-ROM prepared by USGS, and for the time period 1993–2001 from the PDE data and IRIS data are used. Concerning the relationships developed between different magnitude scales and between surface wave magnitudes (M_S) and intensity for different source regions in Turkey, we have constructed a uniform catalog of M_S. We have estimated the values of M_max and I_max using the Gumbel III asymptotic distribution. Highest a-values are observed in the Aegean region and the lowest b-values are estimated for the North Anatolian Fault. Maximum values of a/b, M_max and I_max are related to the eastern and western part of the North Anatolian Fault and the Aegean Arc. The lowest values of all parameters are observed near the Mid Anatolian Fault system. Linear relationships have been calculated between a/b, M_max and I_max using orthogonal regression. If one of the three parameters is computed, two other parameters can be calculated empirically using these linear relationships. Hazard maps of M_max and I_max values are produced using these relationships for a grid of equally spaced points at 1°. It is observed that the maps produced empirically may be used as a measure of seismic hazard in Turkey.     

Ecological risk assessment using trace elements from surface sediments of Izmit Bay (Northeastern Marmara Sea) Turkey

The aim of this study was to study ecological risk assessment of trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) in Izmit Bay surface sediments in the <63 microm fraction. Sediment samples were collected from 8 sites along the north coastline of the bay. Samples were subjected to a total digestion technique and analyzed for major (organic carbon) and minor (As, Cd, Cr, Cu, Ni, Pb and Zn) elements. Sediments heavily contaminated are evaluated by the Sediment Quality Guidelines (SQG) of US EPA. The degree of contamination (Cd) is estimated as very high at each site. Two sets of SQGs, effect range-low/effect range median values and TEL/probable effect level (PEL) values were used in our study. Sediments from the each site are judged toxic when two or more of the PEL values exceed EPA guidelines. Our results are in agreement with previously reported sediment toxicity test results.     

Laboratory validation of lattice Boltzmann method for modeling pore-scale flow in granular materials

Characteristics of fluid flow through various engineering structures, such as granular filters and asphalt pavements, influence their design life. Numerical simulation of fluid flow is useful for evaluating the hydraulic characteristics of these materials. Among various techniques, the lattice Boltzmann (LB) method is widely accepted due to the ease of implementing boundary conditions and the numerical stability in a wide variety of flow conditions. It has proven to be extremely efficient in the simulation of fluid flow through the complex geometries of granular materials. In this study, two-dimensional and three-dimensional LB models were developed to represent pore-scale monophasic Newtonian incompressible fluid flow in granular materials. Three-dimensional geometries of compacted aggregates and asphalt specimens were generated from X-ray Computed Tomography technique and used as input for the LB model. The accuracy of the models was verified by comparing the results with analytical solutions of simple geometries and hydraulic conductivity measurements on the compacted aggregates and hot mix asphalt specimens. The results of LB simulations were in excellent agreement with those obtained from analytical calculations and laboratory measurements.     

Remediation of piled foundations against lateral spreading by passive site stabilization technique

Physical modeling tests were conducted on pile foundations to measure the seismic performance of a new ground improvement technology, called passive site stabilization, for use on sites susceptible to liquefaction and liquefaction-induced lateral spreading. The method involves the slow injection of a low-viscosity stabilizer in conjunction with the natural groundwater flow. The effectiveness of the treatment using dilute colloidal silica as the stabilizer was tested by two centrifuge models that simulated soil–pile interaction of a 2×2 end-bearing pile group embedded in a multilayer soil deposit of 10-m thickness. The models utilized a laminar box and involved gently inclined soil profiles with and without the applied soil improvement. Response of the pile groups and the lateral spreading behaviors of the treated and untreated soil under a simulated base shaking were investigated and compared. The results showed that treatment with dilute colloidal silica stabilizer minimized permanent lateral deformations and reduced the liquefaction potential of the soil. Significant reductions occurred in the measured pile bending moments and axial forces because the layer treated with dilute colloidal silica did not liquefy. Thus, the technique can be an alternative to traditional methods of ground improvement.     

On the Use of Venturi Tubes in Aeration

The ecological quality of water depends largely on the amount of oxygen that the water can hold. The higher the level of dissolved oxygen, the better the quality of a water system. By measuring dissolved oxygen, scientists determine the quality of water and health of an ecosystem. Oxygen enters water by entrainment of air bubbles. Many industrial and environmental processes involve the aeration of a liquid by such entrainment of air bubbles. Venturi aeration is a method of aeration that has become popular in recent years. When a minimal amount of differential pressure exists between the inlet and outlet sides of a venturi tube, a vacuum (air suction) occurs at the suction holes of the venturi tube. The present paper describes the effect of Reynolds Number, air inlet hole diameter, inlet diameter, pipe length, and angle of pipe downstream of the venturi tube, on the air injection rate. It is observed from the results that venturi tubes have high air injection efficiencies. Therefore, venturi tubes can be used as highly effective aerators in ponds, lakes, fish hatcheries, water treatment plants, etc.     

A Comparative Study for 3D Surface Modeling of Coal Deposit by Spatial Interpolation Approaches

The planning stages of mining require comprehensive and detailed analyses. The proper determination of the orebody boundary is one of the most important points to provide optimum model structure and projections. The limits can be determined by different methods based on the site geology. Although some three dimensional (3D) models were proposed for providing detailed information concerning a mine deposit, developing a solid model via a 3D approach is novelty. In other words, surface modeling should be performed for creating a solid model and determining limits of the deposit. In this way, sensible generation of the surface model can be achieved. This study investigated the estimation capability of the polynomial approach, which is a novel spatial interpolation method, for modeling a coal deposit surface. The performance of the proposed model was compared with some conventional methods in the literature. The results showed that the polynomial interpolation method is an effective method to employ for surface modeling of a mine deposit.     

Absolute properties of the neglected eclipsing B-type binary HD 194495

We present the results of the high-resolution spectroscopic observations of the neglected binary system HD 194495 (B3 IV-V+B4 V). A combined analysis of three different photometric data set (Tycho B_T and V_T photometry, H_p-band data of Hipparcos and V-band data of ASAS3 photometry) and radial velocities indicates that the system has an orbital period of 4.90494 ± 0.00005 days and an inclination of 69 ± 1 degrees. This solution yields masses and radii of M₁ = 7.57 ± 0.08 M_⊙ and R₁ = 5.82 ± 0.03 R_⊙ for the primary and M₂ = 5.46 ± 0.09 M_⊙ and R₂ = 3.14 ± 0.08 R_⊙ for the secondary. Based on the position of the two stars plotted on a theoretical H-R diagram, we find that the age of the system is ?28 Myr, according to stellar evolutionary models. The spectroscopic and photometric results are in agreement with those obtained using theoretical predictions.