Sensitivity of tidal characteristics in double inlet systems to momentum dissipation on tidal flats: a perturbation analysis

In a tidal channel with adjacent tidal flats, along–channel momentum is dissipated on the flats during rising tides. This leads to a sink of along–channel momentum. Using a perturbative method, it is shown that the momentum sink slightly reduces the M₂ amplitude of both the sea surface elevation and current velocity and favours flood dominant tides. These changes in tidal characteristics (phase and amplitude of sea surface elevations and currents) are noticeable if widths of tidal flats are at least of the same order as the channel width, and amplitudes and gradients of along–channel velocity are large. The M₂ amplitudes are reduced because stagnant water flows from the flats into the channel, thereby slowing down the current. The M₄ amplitudes and phases change because the momentum sink acts as an advective term during the fall of the tide, such a term generates flood dominant currents. For a prototype embayment that resembles the Marsdiep–Vlie double–inlet system of the Western Wadden Sea, it is found that for both the sea surface elevation and current velocity, including the momentum sink, lead to a decrease of approximately 2% in M₂ amplitudes and an increase of approximately 25% in M₄ amplitudes. As a result, the net import of coarse sediment is increased by approximately 35%, while the transport of fine sediment is hardly influenced by the momentum sink. For the Marsdiep–Vlie system, the M₂ sea surface amplitude obtained from the idealised model is similar to that computed with a realistic three–dimensional numerical model whilst the comparison with regard to M₄ improves if momentum sink is accounted for.     

Ground-motion characterization for the probabilistic seismic hazard assessment in Turkey

This study describes the methodology implemented to establish the ground-motion logic-tree for national probabilistic seismic hazard map of Turkey for shallow active crustal regions. The presented procedure provides quantitative information to guide the hazard experts while establishing the logic tree to capture the epistemic uncertainty in ground-motion characterization. It uses non-data-driven and data-driven testing methods to identify and rank candidate ground-motion prediction equations (GMPEs) under a specific ground-motion database. The candidate GMPEs are subjected to visual inspection and are classified into center, body and range (CBR) spectral estimates for a proper consideration of epistemic uncertainty. The GMPEs classified into CBR are then used in a suite of seismic hazard sensitivity analysis to establish the most suitable GMPE logic-tree whose spectral estimates are not biased by any one of the GMPEs in the logic-tree structure. The sensitivity analysis considers normalized spectral ordinates and is not manipulated by the spectral amplitudes. The proposed procedure is inherited from the relevant studies of the Earthquake Model of the Middle East (EMME; www.efehr.org:8080/jetspeed/portal/emme.psml) regional seismic hazard project. This paper also highlights the similarities and differences in ground-motion characterization between EMME and our approach.     

A statistical assessment on global drift ratio demands of mid-rise RC buildings using code-compatible real ground motion records

Over the past 20 years, significant socio-economic losses have been encountered in Turkey due to several moderate to large earthquakes. The studies published after the earthquakes concurringly emphasized that multistory reinforced concrete (RC) buildings, mostly 3–7 story ones, collapsed or were heavily damaged as a result of inadequate seismic performance. Global drift ratio demands are mostly used as a representative quantity for determining the behavior of structures when subjected to earthquakes. In this study, three representative mid-rise RC buildings are analyzed by nonlinear time history analysis using code-compatible real ground motion record sets and the calculated global drift ratio demands of these buildings are statistically evaluated. Ground motion record sets compatible with the design spectrum defined for local soil classes in the Turkish Earthquake Code (TEC-2007) are used for the analyses. In order to evaluate the effect of the number of ground motions on drift ratio demands, five different ground motion record sets with 7, 11 and 15 ground motion records are used separately for each local soil class. Results of this study indicate that (1) the dispersion of global drift ratio demands calculated for individual ground motion records in record sets is high, (2) local soil class has no significant effect on dispersion. However, dispersion increases in a direct proportion to the number of ground motion records in a record set, (3) the mean of global drift ratio demands calculated for different ground motion record sets may differ although they are compatible with the same design spectrum, (4) the mean of the drift demands obtained from different ground motion record sets compatible with a particular design spectrum can be accepted as simply random samples of the same population at 95% confidence level.     

The QuakeSim Project: Web Services for Managing Geophysical Data and Applications

We describe our distributed systems research efforts to build the “cyberinfrastructure” components that constitute a geophysical Grid, or more accurately, a Grid of Grids. Service-oriented computing principles are used to build a distributed infrastructure of Web accessible components for accessing data and scientific applications. Our data services fall into two major categories: Archival, database-backed services based around Geographical Information System (GIS) standards from the Open Geospatial Consortium, and streaming services that can be used to filter and route real-time data sources such as Global Positioning System data streams. Execution support services include application execution management services and services for transferring remote files. These data and execution service families are bound together through metadata information and workflow services for service orchestration. Users may access the system through the QuakeSim scientific Web portal, which is built using a portlet component approach.     

Forward modelling receiver functions for crustal structure beneath station TBZ (Trabzon, Turkey)

We use teleseismic three-component digital data from the Trabzon, Turkey broadband seismic station TBZ to model the crustal structure by the receiver function method. The station is located at a structural transition from continental northeastern Anatolia to the oceanic Black Sea basin. Rocks in the region are of volcanic origin covered by young sediments. By forward modelling the radial receiver functions, we construct 1-D crustal shear velocity models that include a lower crustal low-velocity zone, indicating a partial melt mechanism which may be the source of surfacing magmatic rocks and regional volcanism. Within the top 5 km, velocities increase sharply from about 1.5 to 3.5 km s⁻¹. Such near-surface low velocities are caused by sedimentation, extending from the Black Sea basin. Velocities at around 20 km depth have mantle-like values (about 4.25 km s⁻¹ ), which easily correlate to magmatic rocks cropping out on the surface. At 25 km depth there is a thin low-velocity layer of about 4.0 km s⁻¹. The average Moho velocity is about 4.6 km s⁻¹, and its depth changes from 32 to 40 km. Arrivals on the tangential components indicate that the Moho discontinuity dips approximately southwards, in agreement with the crustal thickening to the south. We searched for the solution of receiver functions around the regional surface wave group velocity inversion results, which helped alleviate the multiple solution problem frequently encountered in receiver function modelling.
Station TBZ is a recently deployed broadband seismic station, and the aim of this study is to report on the analysis of new receiver function data. The analysis of new data in such a structurally complex region provides constraining starting models for future structural studies in the region.     

Crushed recycled glass as a filter medium and comparison with silica sand

The objective of this work was to evaluate crushed recycled glass as a medium for rapid filtration. In the first part of this work, physical and hydraulic characteristics of the glass medium were studied. In the second part, pilot scale inline filtration experiments were carried out using raw waters from three different water sources. Two physically identical filter columns were operated in parallel in all the experiments. One filter contained a silica sand medium that is widely used in Turkey, whereas the other filter contained crushed recycled glass. Experiments were repeated five times as follows: (i) Without the use of a coagulant, (ii–iii) with 5 mg/L and 10 mg/L of alum, and (iv–v) with 5 mg/L and 10 mg/L of ferric chloride. Turbidity, particle counts, and head losses were measured and compared as functions of time. The following were observed: (1) Provided that a coagulant was used, the filter containing crushed glass produced effluent turbidities and particle counts similar to those obtained with the sand filter. (2) The crushed glass medium generated both a smaller clean‐bed head loss and smaller clogging head losses than those of the sand filter. It is concluded that crushed glass shows significant promise as an alternative to silica sand in rapid filtration.     

Development of New Electrochemical Surfaces for the Detection of Metals in Waste Water

In this study, electrochemical experiments were performed in non‐aqueous media in order to determine electrochemical behavior of some of the glyoxime derivatives (GDs). Phenylglyoxime (PG), p‐chloro‐phenylglyoxime (p‐CPG), and 1,2‐phenylendiamino‐p‐chlorophenylglyoxime (PACPG) were chosen as GDs. Pt wire, Ag/Ag⁺ (in 0.01 M AgNO₃) and glassy carbon (GC) electrode were used as counter, reference, and working electrode, respectively. The multiscan cyclic voltammograms (CVs) of these compounds were registered in acetonitrile (MeCN) containing 0.1 M tetrabutylammonium tetrafluoroborat (TBATFB) at scan rate of 100 mV/s. The potential was swept from 0 to +2.0 V versus Ag/Ag⁺ (0.01 M). The CVs of GDs were compared with each other and the electrochemical behaviors of the compounds were investigated depending on the functional groups in their structures. The electrochemical characterization of these modified surfaces was performed and characterizations were compared with the chatacterization results of bare GC surfaces. The application areas for new surfaces were investigated. These results will be active in the disciplines of electrochemistry and industrial physical chemistry, and in related industrial fields at the dissemination of new information for scientific area.     

A detailed analysis of microseismicity in Samos and Kusadasi (Eastern Aegean Sea) areas

A detailed investigation of microseismicity and fault plane solutions are used to determine the current tectonic activity of the prominent zone of seismicity near Samos Island and Kusadasi Bay. The activation of fault populations in this complex strike-slip and normal faulting system was investigated by using several thousand accurate earthquake locations obtained by applying a double-difference location method and waveform cross-correlation, appropriate for areas with relatively small seismogenic structures. The fault plane solutions, determined by both moment tensor waveform inversions and P-wave first motion polarities, reveal a clear NS trending extension direction, for strike slip, oblique normal and normal faults. The geometry of each segment is quite simple and indicates planar dislocations gently dipping with an average dip of 40–45°, maintaining a constant dip through the entire seismogenic layer, down to 15 km depth.