Detecting small-scale targets by the 2D inversion of two-sided three-electrode data: application to an archaeological survey

The detecting capabilities of some electrical arrays for the estimation of position, size and depth of small-scale targets were examined in view of the results obtained from 2D inversions of apparent-resistivity data. The two-sided three-electrode apparent-resistivity data are obtained by the application of left- and right-hand pole–dipole arrays that also permit the computation of four-electrode and dipole–dipole apparent-resistivity values without actually measuring them. Synthetic apparent-resistivity data sets of the dipole–dipole, four-electrode and two-sided three-electrode arrays are calculated for models that simulate buried tombs. The results of two-dimensional inversions are compared with regard to the resolution in detecting the exact location, size and depth of the target, showing some advantage for the two-sided three-electrode array. A field application was carried out in the archaeological site known as Alaca Hoyuk, a religious temple area of the Hittite period. The two-dimensional inversion of the two-sided three-electrode apparent-resistivity data has led to locating a part of the city wall and a buried small room. The validity of the interpretation has been checked against the results of subsequent archaeological excavations.     

Short note: A simple nomogram for interpretation due to magnetic horizontal cylinders

The magnetic anomaly ΔF due to a long horizontal cylinder yields three points related to its extrema. A nomogram is presented for the determination of some source parameters of the causative body.     

A taxonomic study on the families Lepadellidae and Trichocercidae （Rotifera： Monogononta） of Turkey

Thirteen rotifer species belonging to the families Lepadellidae and Trichocercidae were studied taxonomically from nine water bodies in Turkey. Lepadella biloba is a new entry to the Turkish rotifer fauna. All species were drawn under a light microscope using a camera lucida.     

Microthermometric and stable isotopic (O and H) characteristics of fluid inclusions in the porphyry related Çöpler (İliç - Erzincan) gold deposit,central eastern Turkey

The Çöpler gold deposit occurs within the stockwork of quartz hosted by the Çöpler granitoid (Eosen) and by surrounding metasediments of Keban metamorphic (Late Paleozoic - Early Mesozoic) and the Munzur limestones (Late Carboniferous - Early Cretaceous). Native gold accompanied by small amounts of chalcopyrite, pyrite, magnetite, maghemite, hematite, fahlerz, marcasite, bornite, galena, sphalerite, specular hematite, goethite, lepidochrosite and bravoitic pyrite within the stockwork ore veinlets. In addition, epidote (pistazite - zoisite), garnet, scapolite, chlorite, tremolite/actinolite, muscovite and opaque minerals were determined within the veinlets occurred in skarn zones. The study of fluid inclusions in quartz veinlets showed that the hydrothermal fluids contain CaCl₂, MgCl₂ and NaCl and the salinities of the two phases (L+V) inclusions range from 1.7 to 20.6% NaCl equivalent. Salinity values up to 44% were determined within the halite bearing three phases inclusions. Their homogenization temperature values have a wide range from 145.0 to 380.0°C, indicative of catathermal/hypothermal to epithermal conditions. The δ ¹⁸O and δD values of the fluid inclusion waters from the Çöpler granitoid correspond to those assigned to Primary Magmatic Water, those from the metasediments of Keban metamorphics fall outside of the Primary Magmatic and are within the Metamorphic Water field. A sample from a quartz vein within the skarn zone hosted by the Munzur limestones has a particularly low δD value. The results suggest that fluids derived from the granitoids were mixed with those derived from the metasediments of Keban metamorphics and the the Munzur limestones and resulting in quartz veinlets in these lithologies and the formation of stockwork ores. In view of the occurrence, the features described and processes envisaged for this study area may be applicable in similar settings.     

Estimation of relative humidity based on artificial neural network approach in the Aegean Region of Turkey

The aim of this study is to estimate the monthly mean relative humidity (MRH) values in the Aegean Region of Turkey with the help of the topographical and meteorological parameters based on artificial neural network (ANN) approach. The monthly MRH values were calculated from the measurement in the meteorological observing stations established in Izmir, Mugla, Aydin, Denizli, Usak, Manisa, Kutahya and Afyonkarahisar provinces between 2000 and 2006. Latitude, longitude, altitude, precipitation and months of the year were used in the input layer of the ANN network, while the MRH was used in output layer of the network. The ANN model was developed using MATLAB software, and then actual values were compared with those obtained by ANN and multi-linear regression methods. It seemed that the obtained values were in the acceptable error limits. It is concluded that the determination of relative humidity values is possible at any target point of the region where the measurement cannot be performed.     

Scattered emission from a relativistic outflow and its application to gamma-ray bursts

We investigate a scenario of photon scattering by electrons within a relativistic outflow. The outflow is composed of discrete shells with different speeds. One shell emits radiation for a short duration. Some of this radiation is scattered by the shell(s) behind. We calculate in a simple two-shell model the observed scattered flux density as a function of the observed primary flux density, the normalized arrival time delay between the two emission components, the Lorentz factor ratio of the two shells and the scattering shell's optical depth. Thomson scattering in a cold shell and inverse Compton scattering in a hot shell are both considered. The results of our calculations are applied to the gamma-ray bursts and the afterglows. We find that the scattered flux from a cold slower shell is small and likely to be detected only for those bursts with very weak afterglows. A hot scattering shell could give rise to a scattered emission as bright as the X-ray shallow decay component detected in many bursts, on a condition that the isotropically equivalent total energy carried by the hot electrons is large, ∼10⁵²–10⁵⁶ erg. The scattered emission from a faster shell could appear as a late short γ-ray/MeV flash or become part of the prompt emission depending on the delay of the ejection of the shell.     

Investigation of trace metals distribution in water,sediments and wetland plants of K(i)z(i)l(i)rmak Delta,Turkey

In this study,accumulation and distribution of Pb,Cu,Zn,Co,Ni,Mn and Fe in water,bottom sediments and four plant species (Myriophyllum verticillatum,Hydrocharis morsus-ranae,Nymphaea alba and Typha latifolia) were investigated in (C)ernek Lake of Kizihrmak Delta.The Kizdirmak Delta is one of the largest natural wetlands of Turkey and it is protected by the Ramsar convention since 1993.Selected physico-chemical parameters such as pH,conductivity and dissolved oxygen and also trace metal concentrations were monitored in water.All the parameters obtained were found higher than that of the national standards for the protected lakes and reserves.The accumulated amounts of various trace metals in bottom sediments and wetland plants were found in the following order of Fe ＞ Mn ＞ Zn ＞ Ni ＞ Co ＞ Cu ＞ Pb and Fe ＞ Mn ＞ Zn ＞ Ni ＞ Co respectively.The historical trace metal intake of Myriophyllum verticillatum,Hydrocharis morsus-ranae,Typha latifolia and Nymphaea alba were obtained higher than that of the toxic metal levels and these plants may be accepted as accumulators for the detected trace metals and also bioindicators in the historically polluted natural areas.     

A rapid seismic safety assessment method for mid-rise reinforced concrete buildings

The majority of existing buildings are not safe against earthquakes in most of the developing countries. Existing building stocks should be assessed with a seismic safety assessment method before a devastating earthquake. Cheaper and quicker rapid seismic safety assessment methods can be used instead of code-based assessment methods to determine the seismic performance of existing buildings. In this study, an approach was introduced to determine the seismic performance of existing mid-rise reinforced concrete buildings with fewer parameters and process steps than code-based detailed assessment procedures. Calibration and regulation of the introduced method were conducted on the 39 collapsed buildings’ projects in 1999 Kocaeli, Turkey, earthquake. Finally, 55 existing buildings located in Eskisehir, Turkey, assessed with this calibrated method and the results were compared with the results of a code-based detailed assessment method; the results showed a very good agreement of about 83%. This study shows that the proposed method can be applied for the determination of the seismic performance of existing mid-rise reinforced concrete buildings quickly and without compromising reliability.     

Verringerung der Schwermetall‐ und Sulfatbelastung in sauren bergbaubelasteten Gewässern durch Aluminiumpräzipitate

Attenuation of Heavy Metals and Sulfate by Aluminium Precipitates in Acid Mine Drainage During the mixing of acid mine waters with nearly neutral tributaries, often precipitates are formed which are high in iron or aluminium. These precipitates cover the river bed for many kilometres. Near the town of Lehesten (Thuringian slate mining area), leachates of slate quarries and waste rock dumps contain high amounts of aluminium, sulfate, copper, nickel, zinc, manganese, and H⁺ ions as a result of the oxidation of incorporated pyrite. These leachates enter the brooks Loquitz, Kleine Sormitz, and Rehbach leading to the phenomenon named above. The contribution of the forming aluminium‐rich precipitates on the attenuation of sulfate and heavy metals by sorption or coprecipitation was studied by analysing the composition of water and sediment samples as well as samples of suspended matter. Sulfate is often considered as conservative tracer in acid mine drainage. However, sulfate does not behave conservatively in this system what might be explained by the adsorption of sulfate to the aluminium precipitates. Instead, conservative behaviour was found for calcium, potassium, chloride, zinc, manganese, and nickel. A formation of jurbanite can be excluded because of the low sulfate contents. The sulfate content of the sediment depends on the pH. At low pH values (4.8) the S/Al ratio corresponds to the theoretical ratio in basaluminite and decreases with rising pH. Sulfate is weakly bound to the solid phase and can easily be replaced by OH^– ions. A formation of basaluminite is possible at low pH values with a fluent transition to aluminium hydroxide. Therefore the precipitates are assumed to consist predominantly of aluminium hydroxide with sulfate being adsorbed to the surface.