High Resolution Optical Spectroscopy of a B-type Abundance Standard Candidate in Ori OB1—HD 35039

Astronomy Letters - We present LTE analysis of high resolution optical spectra for the B-type abundance standard candidate HD 35039 (HR 1765, 22 Ori) with an ambigous binary nature. The spectra...     

Detecting small-scale targets by the 2D inversion of two-sided three-electrode data: application to an archaeological survey

The detecting capabilities of some electrical arrays for the estimation of position, size and depth of small-scale targets were examined in view of the results obtained from 2D inversions of apparent-resistivity data. The two-sided three-electrode apparent-resistivity data are obtained by the application of left- and right-hand pole–dipole arrays that also permit the computation of four-electrode and dipole–dipole apparent-resistivity values without actually measuring them. Synthetic apparent-resistivity data sets of the dipole–dipole, four-electrode and two-sided three-electrode arrays are calculated for models that simulate buried tombs. The results of two-dimensional inversions are compared with regard to the resolution in detecting the exact location, size and depth of the target, showing some advantage for the two-sided three-electrode array. A field application was carried out in the archaeological site known as Alaca Hoyuk, a religious temple area of the Hittite period. The two-dimensional inversion of the two-sided three-electrode apparent-resistivity data has led to locating a part of the city wall and a buried small room. The validity of the interpretation has been checked against the results of subsequent archaeological excavations.     

Detecting Clay Minerals in Hydrothermal Alteration Areas with Integration of ASTER Image and Spectral Data in Kösedag-Zara (Sivas), Turkey

Remote sensing technology and its terrestrial components are more useful than classical geological investigation in mineral exploration and mapping the hydrothermal alteration areas and help to investigate larger areas in short time. Intrusive and volcanic rocks, namely Kösedag syenite and Karatas volcanics in Kösedag (Zara) area shows argillic alteration zones. Two different test area were chosen and sampled for mineralogical studies. XRD-CF investigations showed that kaolinite and illite are the dominant clay minerals in test areas of A and B respectively. The spectroradiometer measurements were carried out 5 times on different surfaces of clayey samples with self-illuminated contact-probe lens within the wavelength range of 350-2500 nm. The spectroradiometer measurements used as endmember were resampled to ASTER short wave infrared (SWIR) bandwidths. Band ratio, principal component and decorrelation stretching analysis were performed to visualize the distribution of clay minerals. In spectral classification method, matched filtering (MF) was used for integrating the satellite image and spectroradiometer measurement data. It was concluded that co-interpretations of the band ratio, principal component, decorrelation stretching analysis, MF results and geological map are very useful in determining, classifying and mapping of the argillic alteration zones related to hydrothermal processes on ASTER image and they seem to be very useful to identify the target areas for mineral exploration.     

Microthermometric and stable isotopic (O and H) characteristics of fluid inclusions in the porphyry related Çöpler (İliç - Erzincan) gold deposit,central eastern Turkey

The Çöpler gold deposit occurs within the stockwork of quartz hosted by the Çöpler granitoid (Eosen) and by surrounding metasediments of Keban metamorphic (Late Paleozoic - Early Mesozoic) and the Munzur limestones (Late Carboniferous - Early Cretaceous). Native gold accompanied by small amounts of chalcopyrite, pyrite, magnetite, maghemite, hematite, fahlerz, marcasite, bornite, galena, sphalerite, specular hematite, goethite, lepidochrosite and bravoitic pyrite within the stockwork ore veinlets. In addition, epidote (pistazite - zoisite), garnet, scapolite, chlorite, tremolite/actinolite, muscovite and opaque minerals were determined within the veinlets occurred in skarn zones. The study of fluid inclusions in quartz veinlets showed that the hydrothermal fluids contain CaCl₂, MgCl₂ and NaCl and the salinities of the two phases (L+V) inclusions range from 1.7 to 20.6% NaCl equivalent. Salinity values up to 44% were determined within the halite bearing three phases inclusions. Their homogenization temperature values have a wide range from 145.0 to 380.0°C, indicative of catathermal/hypothermal to epithermal conditions. The δ ¹⁸O and δD values of the fluid inclusion waters from the Çöpler granitoid correspond to those assigned to Primary Magmatic Water, those from the metasediments of Keban metamorphics fall outside of the Primary Magmatic and are within the Metamorphic Water field. A sample from a quartz vein within the skarn zone hosted by the Munzur limestones has a particularly low δD value. The results suggest that fluids derived from the granitoids were mixed with those derived from the metasediments of Keban metamorphics and the the Munzur limestones and resulting in quartz veinlets in these lithologies and the formation of stockwork ores. In view of the occurrence, the features described and processes envisaged for this study area may be applicable in similar settings.     

Estimation of relative humidity based on artificial neural network approach in the Aegean Region of Turkey

The aim of this study is to estimate the monthly mean relative humidity (MRH) values in the Aegean Region of Turkey with the help of the topographical and meteorological parameters based on artificial neural network (ANN) approach. The monthly MRH values were calculated from the measurement in the meteorological observing stations established in Izmir, Mugla, Aydin, Denizli, Usak, Manisa, Kutahya and Afyonkarahisar provinces between 2000 and 2006. Latitude, longitude, altitude, precipitation and months of the year were used in the input layer of the ANN network, while the MRH was used in output layer of the network. The ANN model was developed using MATLAB software, and then actual values were compared with those obtained by ANN and multi-linear regression methods. It seemed that the obtained values were in the acceptable error limits. It is concluded that the determination of relative humidity values is possible at any target point of the region where the measurement cannot be performed.     

A rapid seismic safety assessment method for mid-rise reinforced concrete buildings

The majority of existing buildings are not safe against earthquakes in most of the developing countries. Existing building stocks should be assessed with a seismic safety assessment method before a devastating earthquake. Cheaper and quicker rapid seismic safety assessment methods can be used instead of code-based assessment methods to determine the seismic performance of existing buildings. In this study, an approach was introduced to determine the seismic performance of existing mid-rise reinforced concrete buildings with fewer parameters and process steps than code-based detailed assessment procedures. Calibration and regulation of the introduced method were conducted on the 39 collapsed buildings’ projects in 1999 Kocaeli, Turkey, earthquake. Finally, 55 existing buildings located in Eskisehir, Turkey, assessed with this calibrated method and the results were compared with the results of a code-based detailed assessment method; the results showed a very good agreement of about 83%. This study shows that the proposed method can be applied for the determination of the seismic performance of existing mid-rise reinforced concrete buildings quickly and without compromising reliability.     

Displacement amplification factors for steel eccentrically braced frames

Inelastic deformation capacity of links is a factor that significantly influences design of steel eccentrically braced frames (EBFs). The link rotation angle is used to describe inelastic link deformation. The link rotation angle is generally calculated by making use of design story drifts that in turn are calculated by modifying the elastic displacements by a displacement amplification factor. This paper presents a numerical study undertaken to evaluate the displacement amplification factor given in ASCE7‐10 for EBFs and the rigid‐plastic mechanism used for calculating link rotation angles. A total of 72 EBFs were designed by considering the number of stories, the bay width, the link length to bay width ratio, and the seismic hazard level as the prime variables. All structures were analyzed using elastic and inelastic time history analyses. The results indicated that the displacement amplification factor given in ASCE7‐10 provides unconservative estimates of the story drifts. On the other hand, the rigid‐plastic mechanism provides conservative estimates of link rotations. Based on the results of the numerical study, a new set of displacement amplification factors that vary along the height of the structure and modifications to the rigid‐plastic mechanism were developed. In light of the proposed modifications, the EBFs were redesigned and analyzed using inelastic time history analysis. The results indicated that the proposed modifications provide improvements for the displacement amplification factor and link rotation angle calculation procedures. Copyright © 2014 John Wiley & Sons, Ltd.     

Joint parameter estimation from magnetic resonance and vertical electric soundings using a multi‐objective genetic algorithm

Magnetic resonance sounding (MRS) has increasingly become an important method in hydrogeophysics because it allows for estimations of essential hydraulic properties such as porosity and hydraulic conductivity. A resistivity model is required for magnetic resonance sounding modelling and inversion. Therefore, joint interpretation or inversion is favourable to reduce the ambiguities that arise in separate magnetic resonance sounding and vertical electrical sounding (VES) inversions. A new method is suggested for the joint inversion of magnetic resonance sounding and vertical electrical sounding data. A one‐dimensional blocky model with varying layer thicknesses is used for the subsurface discretization. Instead of conventional derivative‐based inversion schemes that are strongly dependent on initial models, a global multi‐objective optimization scheme (a genetic algorithm [GA] in this case) is preferred to examine a set of possible solutions in a predefined search space. Multi‐objective joint optimization avoids the domination of one objective over the other without applying a weighting scheme. The outcome is a group of non‐dominated optimal solutions referred to as the Pareto‐optimal set. Tests conducted using synthetic data show that the multi‐objective joint optimization approximates the joint model parameters within the experimental error level and illustrates the range of trade‐off solutions, which is useful for understanding the consistency and conflicts between two models and objectives. Overall, the Levenberg‐Marquardt inversion of field data measured during a survey on a North Sea island presents similar solutions. However, the multi‐objective genetic algorithm method presents an efficient method for exploring the search space by producing a set of non‐dominated solutions. Borehole data were used to provide a verification of the inversion outcomes and indicate that the suggested genetic algorithm method is complementary for derivative‐based inversions.