Decoupling of As and Fe release to Bangladesh groundwater under reducing conditions. Part I: Evidence from sediment profiles

This study reexamines the notion that extensive As mobilization in anoxic groundwater of Bangladesh is intimately linked to the dissolution of Fe oxyhydroxides on the basis of analyses performed on a suite of freshly collected samples of aquifer material. Detailed sediment profiles extending to 40 to 70 m depth below the surface were obtained at six sites where local groundwater As concentrations were known to span a wide range. The sediment properties that were measured include (1) the proportion of Fe(II) in the Fe fraction leached in hot 1.2 N HCl, (2) diffuse spectral reflectance, and (3) magnetic susceptibility.In parallel with local concentrations of dissolved As ranging from <5 to 600 μg/L, Fe(II)/Fe ratios in shallow (gray) Holocene sands tended to gradually increase with depth from values of 0.3 to 0.5 to up to 0.9. In deeper (orange) aquifers of presumed Pleistocene age that were separated from shallow sands by a clay layer and contained <5 μg/L dissolved As, leachable Fe(II)/Fe ratios averaged ∼0.2. There was no consistent relation between sediment Fe(II)/Fe and dissolved Fe concentrations in groundwater in nearby wells. The reflectance measurements indicate a systematic linear relation (R² of 0.66; n = 151) between the first derivative transform of the reflectance at 520 nm and Fe(II)/Fe. The magnetic susceptibility of the shallow aquifer sands ranged from 200 to 3600 (x 10⁻⁹ m³/kg SI) and was linearly related (R² of 0.75; n = 29) to the concentrations of minerals that could be magnetically separated (0.03 to 0.79% dry weight). No systematic depth trends in magnetic susceptibility were observed within the shallow sands, although the susceptibility of deeper low-As aquifers was low (up to ∼200 × 10⁻⁹ m³/kg SI).This set of observations, complemented by incubation results described in a companion paper by van Geen et al. (this volume), suggests that the release of As is linked to the transformation of predominantly Fe (III) oxyhydroxide coatings on sand particles to Fe(II) or mixed Fe(II/III) solid phases with a flatter reflectance spectrum such as siderite, vivianite, or magnetite, without necessarily resulting in the release of Fe to groundwater. The very low As/Fe ratio of magnetically separated minerals compared to the As/Fe of bulk acid leachate (2 vs. 40 10⁻⁶, respectively) suggests that such a transformation could be accompanied by a significant redistribution of As to a mobilizable phase on the surface of aquifer particles.     

Petrology and geochemistry of late archaean granitoids in the northern part of Eastern Dharwar Craton,Southern India: Implications for transitional geodynamic setting

The results of field, petrographic and geochemical work of the granitoids of Hutti-Gurgunta area in the northern part of Eastern Dharwar Craton (EDC) is presented in this paper. This crustal section comprises polyphase banded to foliated TTG gneisses, middle amphibolite facies Gurgunta schist belt and upper greenschist facies Hutti schist belt and abundant granite plutons. The focus of the present study is mainly on basement TTG gneisses and a granite pluton (∼ 240 sq km areal extent), to discuss crustal accretion processes including changing petrogenetic mechanism and geodynamic setting. The TTGs contain quartz, plagioclase, lesser K-feldspar and hornblende with minor biotite while the granite contain quartz, plagioclase, K-feldspar and hornblende. Late stage alteration (chloritisation, sericitisation and epidotisation) is wide spread in the entire area. A huge synplutonic mafic body which is dioritic to meladioritic in composition injects the granite and displays all stages of progressive mixing and hybridization. The studied TTGs and granite show distinct major and trace element patterns. The TTGs are characterized by higher SiO₂, high Al₂O₃, and Na₂O, low TiO₂, Mg#, CaO, K₂O and LILE, and HFS elements compared to granite. TTGs define strong trondhjemite trend whilst granite shows calc-alkaline trend. However, both TTGs and granite show characteristics of Phanerozoic high-silica adakites. The granite also shows characteristics of transitional TTGs in its high LILE, and progressive increase in K₂O with differentiation. Both TTGs and granite define linear to sub-linear trends on variation diagrams. The TTGs show moderate total REE contents with fractionated REE patterns (La/Yb_N =17.73–61.73) and slight positive or without any significant Eu anomaly implying little amount of amphibole or plagioclase in residual liquid. On the other hand, the granite displays poor to moderate fractionation of REE patterns (La/Yb_N = 9.06–67.21) without any significant Eu anomaly. The TTGs have been interpreted to be produced by low-K basaltic slab melting at shallow depth, whereas the granite pluton has been formed by slab melting at depth and these melts interacted with peridotite mantle wedge. Such changing petrogenetic mechanisms and geodynamic conditions explain increase in the contents of MgO, CaO, Ni and Cr from 2700 Ma to 2500 Ma granitoids in the EDC.     

Instability of a streaming jet under the influence of vacuum magnetic fields

The magnetohydrodynamic stability of a streaming liquid cylinder subject to surface tension and pervaded by a magnetic vacuum field has been elaborated for all axisymmetric and non-axisymmetric disturbances. The dispersion relation is obtained and studied analytically and numerically. the streaming has always a destabilizing effect. The axial magnetic fields inside and outside the jet have always stabilizing effects for all perturbations. The transverse magnetic field has a destabilizing effect. However, if the axial field intensity is so high and paramount over that the transverse field, the destabilizing character of the model is suppressed. The latter is satisfied if the Alfvén wave velocity is greater than the equilibrium liquid velocity.     

Prediction of satellite motions in the Earth's gravitational field with axial symmetry by the KS regularized theory

In this paper, economical and stable recurrence formulae for the Earth's zonal potential and its gradient for the KS regularized theory will be established for any numberN of the zonal harmonic coefficient. A general recursive computational algorithm based on these formulae is also established for the initial value problem of the KS theory for the prediction of artificial satellites in the Earth's gravitational field with axial symmetry. Applications of the algorithm for the problem of the final state prediction are illustrated by numerical examples of three test orbits each for two geopotential models corresponding toN=2 andN=36. A final state of any desired accuracy is obtained for each case study, a result which shows the flexibility of the algorithm.     

Seismic and well logging interpretation for evaluation of the lower Bahariya reservoir,southwest Qarun (SWQ) Field,Gindi Basin,Egypt

This paper focuses on seismic and well log interpretations for evaluating the sandstones of the Cenomanian Bahariya Formation in the southwest Qarun Field, Gindi Basin, northern Western Desert of Egypt. The seismic profiles display a clear anticlinal structure intersected by reverse faults in the study area. This faulted anticline has been interpreted to be one of the Syrian arc system folds formed by Upper Cretaceous tectonic inversion, which resulted from the NW movement of the African Plate relative to Laurasia. This anticline has been recommended as a target for exploration by the present work as it may represent a structural trap for hydrocarbon accumulation. The sandstones of the Lower Bahariya Formation in the southwest Qarun Field display good reservoir characteristics. The interpretation of the available well log data for the SWQ-21 and SWQ-25 wells for the Lower Bahariya Formation reflects a good reservoir quality for oil production in its topmost part. This reservoir possesses low S_W (<50%), high porosity (16%), low S_W/S_XO and low BVW (<0.09) which all reflect a high potential for oil production.     

Structuring factors of the spatio-temporal variability of macrozoobenthos assemblages in a southern Mediterranean lagoon: How useful for bioindication is a multi-biotic indices approach?

The authors investigated the impact of the extension of the El Kantra Channel on the composition and structure of macrobenthic assemblages in Boughrara Lagoon (Gulf of Gabes, Tunisia along with the use of 4 biotic indices (AMBI, BENTIX, M-AMBI and TUBI). Thirteen stations were sampled seasonally in 2012–2013. Forty-one species were found in 2012–2013 not recorded in 2009–2010, including 20 species of polychaetes belonging to the trophic groups of deposit-feeders and carnivores which are expected to increase in areas disturbed by organic pollution. During the survey, we recorded a high fish mortality, essentially caused by the development of harmful algal blooms (HAB) which increased organic matter deposition, thus inducing polychaete development. This seems to weaken the bio-indicating power of biotic indices used here which, paradoxically, classified all sampled stations at a high ecological status. A review of these indices and their applicability to all marine environments is recommended.     

Geochemistry of the High Dam Lake sediments,south Egypt： implications for environmental significance

The goal of the present work is to perform a geochemical assessment of High Dam Lake bottom sediments for determining the fate, dispersion and levels of trace elements causing environmental pollution, and provided an access to their probable sources. The sediment samples were analyzed using ICP-MS for 20 elements; Ag, Ba, Cr, Cu, Ga, Hf, Mn, Pb, Rb, Sc, Se, Sn, Sr, Ta Th Ti, T1, U, V and Zr, and their obtained data were treated using statistical, graphical and mapping techniques. The results showed the data set of all analyzed elements affected by outliers and extreme values that caused deviation away from normality. Kruskal-Wallis test revealed that median of some trace element levels in Lake sediments, was not significantly different and other elements rejected the Null hypothesis. Most analyzed elements had high values of median and mean in sediments of Lake Nubia rather than Lake Nasser and their normalization gave the same results of calculated environment factors. Subsequently, Lake Nubia sediments possessed high combined EF levels ofTh, Sc, Sn, Ag, Zr, Hf, Ta, Sr, U, Ti, V, Cr, and Mn, causing significant contamination, which was great potentially related to industrial, agricultural, urbanization and mining activities. Whereas, combined EF of Se, Cu, Ga, Pb, Ba, Rb, and Tl, which are highly elevated in southern Lake Nasser sediments owing to their source are great possibly derived from Lake Nubia and geogenic activities. With decreasing distance towards the High Dam body, the contaminant elements were diminished due to reduction in the environmental factors and Sudanese pollution sources leading to the northern Lake Nasser considered to be less contaminated. Overall, the present study is an environmental alert for contaminated sediments that carried contaminants and considered the secondary source of pollution impact on ecosystem, and subsequently, their environmental risk on Human health.     

Evaporation modelling by heuristic regression approaches using only temperature data

Accurate estimation of pan evaporation (E_pan) is very important in water resources management, irrigation scheduling and water budget of lakes. This study investigates the accuracy of two heuristic regression approaches, multivariate adaptive regression splines (MARS) and M5 model tree (M5Tree) in estimating pan evaporation using only temperature data as input. Monthly minimum temperature, maximum temperature and E_pan data from three Turkish stations were used, with month number (periodicity information) added as input to see its effect on estimation accuracy. The models were compared with the calibrated Hargreaves-Samani (CHS), Stephens-Stewart (SS) and multiple linear regression methods. Three different train-test splitting strategies (50%–50%, 60%–40% and 75%–25%) were employed for better evaluation of the applied methods. The results show that the MARS method generally estimated monthly E_pan with higher accuracy compared to the M5Tree, CHS and SS methods. When extraterrestrial radiation, calculated from Julian date and latitude information, was used as input to the SS instead of solar radiation, satisfactory estimates were obtained. A positive effect on model accuracy was observed when involving periodicity information in inputs and increasing training data length.     

Shear waves in elastic medium with void pores welded between vertically inhomogeneous and anisotropic magnetoelastic semi-infinite media

The paper intends to study the propagation of horizontally polarized shear waves in an elastic medium with void pores constrained between a vertically inhomogeneous and an anisotropic magnetoelastic semi-infinite media. Elasto-dynamical equations of elastic medium with void pores and magnetoelastic solid have been employed to investigate the shear wave propagation in the proposed three-layered earth model. Method of separation of variables has been incorporated to deduce the dispersion relation. All possible special cases have been envisaged and they fairly comply with the corresponding results for classical cases. The role of inhomogeneity parameter, thickness of layer, angle with which the wave crosses the magnetic field and anisotropic magnetoelastic coupling parameter for three different materials has been elucidated and represented by graphs using MATHEMATICA.     

Numerical estimation of carbonate rock properties using multiscale images

Characterizing the pore space of rock samples using three‐dimensional (3D) X‐ray computed tomography images is a crucial step in digital rock physics. Indeed, the quality of the pore network extracted has a high impact on the prediction of rock properties such as porosity, permeability and elastic moduli. In carbonate rocks, it is usually very difficult to find a single image resolution which fully captures the sample pore network because of the heterogeneities existing at different scales. Hence, to overcome this limitation a multiscale analysis of the pore space may be needed. In this paper, we present a method to estimate porosity and elastic properties of clean carbonate (without clay content) samples from 3D X‐ray microtomography images at multiple resolutions. We perform a three‐phase segmentation to separate grains, pores and unresolved porous phase using 19 μm resolution images of each core plug. Then, we use images with higher resolution (between 0.3 and 2 μm) of microplugs extracted from the core plug samples. These subsets of images are assumed to be representative of the unresolved phase. We estimate the porosity and elastic properties of each sample by extrapolating the microplug properties to the whole unresolved phase. In addition, we compute the absolute permeability using the lattice Boltzmann method on the microplug images due to the low resolution of the core plug images. In order to validate the results of the numerical simulations, we compare our results with available laboratory measurements at the core plug scale. Porosity average simulations for the eight samples agree within 13%. Permeability numerical predictions provide realistic values in the range of experimental data but with a higher relative error. Finally, elastic moduli show the highest disagreements, with simulation error values exceeding 150% for three samples.