A practical co-simulation approach for multiscale analysis of geotechnical systems

The particulate nature of granular soils can be accurately simulated at a microscale level. However, due to the huge spatial extent of geotechnical systems, a model fully constructed at such a scale is almost impossible with current computing technologies. Hence, continuum-based approaches are considered as the practical scale for modeling the majority of problems. Combining both scales enables benefiting from the advantages of both techniques while trying to overcome their drawbacks. Although a significant number of publications have addressed coupling both scales, only a few provide information regarding implementing the proposed procedures. In this study, an efficient co-simulation framework for conducting multiscale analysis is introduced. The framework is based on integrating existing continuum and micromechanical modeling software packages and therefore benefitting from already existing codes. A computational simulation of a rigid pile in contact with granular soil demonstrating the capabilities of such technique is presented. The near-field zone surrounding the pile is modeled using DEM whereas FEM is utilized to model far-field zones that are not affected by the presence of the pile. Results of conducted simulations resemble those obtained from experimental results. The proposed approach appears to be a very effective and promising tool to model boundary value problems of geotechnical systems.     

Factor and cluster analysis of water quality data of the groundwater wells of Kushtia, Bangladesh: Implication for arsenic enrichment and mobilization

The study area is located in the southwestern part of Bangladesh. Twenty-six groundwater samples were collected from both shallow and deep tube wells ranging in depth from 20 to 60 m. Multivariate statistical analyses including factor analysis, cluster analysis and multidimensional scaling were applied to the hydrogeochemical data. The results show that a few factors adequately represent the traits that define water chemistry. The first factor of Fe and HCO₃ is strongly influenced by bacterial Fe (III) reduction which would raise both Fe and HCO₃ concentrations in water. Na, Cl, Ca, Mg and PO₄ are grouped under the second factor representing the salinity sources of waters. The third factor, represented by As, Mn, SO₄ and K is related to As mobilization processes. Cluster analysis has been applied for the interpretation of the groundwater quality data. Initially Piper methods have been employed to obtain a first idea on the water types in the study area. Hierarchical cluster analysis was carried out for further classification of water types in the study area. Twelve components, namely, pH, Fe, Mn, As, Ca, Mg, Na, K, HCO₃, Cl, SO₄ and NO₃ have been used for this purpose. With hierarchical clustering analysis the water samples have been classified into 3 clusters. They are very high, high and moderately As-enriched groundwater as well as groundwater with elevated SO₄.     

Factors controlling mechanisms of groundwater salinization and hydrogeochemical processes in the Quaternary aquifer of the Eastern Nile Delta, Egypt

In this study, combining interpretations of conservative dissolved ions and environmental isotopes in water were used to investigate the main factors and mechanisms controlling groundwater salinization and hydrogeochemical processes in the Eastern Nile Delta, Egypt. Hydrogeochemical and isotopic study has been carried out for 61 water samples from the study area. Total dissolved solid (TDS) contents of groundwater are highly variable rising along flowpath from the south (410 mg/L) to the north (14,784 mg/L), implying significant deterioration and salinization of groundwater. Based on TDS and ionic ratios, groundwater samples were classified into three groups. In low-saline groups, water chemistry is greatly influenced by cation exchange, mineral dissolution/precipitation, anthropogenic pollutants and mixing with surface water. Whilst, in high-saline groups, water chemistry is affected by salt-water intrusion, reverse cation exchange and evaporation. The chemical constituents originating from saline water sources, reverse ion exchange and mineral dissolution are successfully differentiated using ionic delta and saturation index approaches. The δ¹⁸O–δ²H relationship plots on a typical evaporation line, suggesting potential evaporation of the recharging water prior to infiltration. Isotope evidence concludes that the groundwater have been considerably formed by mixing between depleted meteoric water recharged under different climatic conditions and recently infiltrating enriched surface water and excess of irrigation water. The δ¹⁸O data in conjunction with chloride concentrations provide firm evidence for impact of dissolution of marine-origin evaporite deposits, during past geologic periods, on groundwater salinity in the northern region. Moreover, the relation between ¹⁴C activities and Cl^? concentration confirms this hypothesis.     

Red Sea faulting and salt diapirism as a potential geotechnical hazard in Jazan,southwest Saudi Arabia: inferences from gravity data

Natural Hazards - The main objective of this study is to detect the subsurface extension of salt diapirs and structural deformations in the city of Jazan and its suburbs using gravity data. Salt...     

Mineralogy and geochemistry of fine-grained Dahab stream sediments,Southeastern Sinai,Egypt: emphasis on the intergrowths of Fe–Ti oxides

Acta Geochimica - Mineralogical and geochemical characteristics of stream sediments collected from 30 stations in the Dahab-Wadi Kid area (southeastern Sinai, Egypt) are presented. The studied...     

Hydrothermal alteration and evolution of Zr-Th-U-REE mineralization in the microgranite of Wadi Ras Abda,North Eastern Desert,Egypt

Ras Abda plutonic suite, North Eastern Desert of Egypt, consists predominantly of Neoproterozoic calc-alkaline older granites. Minor exposures of pink microgranite are occurring along Wadi Ras Abda within the older granites. Previous studies on this area demonstrated that the microgranite is altered in some parts and contains anomalous concentrations of rare metal elements (Zr, Th, and U). These altered and mineralized zones are re-assessed using field observations, chemical analysis, and by the application of various transmitted light and electron microscopic techniques. The rare metals exist as mineral segregation grew freely into open cavities of the microgranite and concordant with the NNE strike-slip fault movement. The mineralized zones contain an assemblage of secondary magnetite, zircon, uranothorite, columbite-(Mn), fergusonite-(Y), and allanite-(Ce). The extreme abundance of zircon in the mineralized zone, along with other evidence, indicates a hydrothermal origin of this zircon together with associated rare metals. The geochemical investigation and mass balance calculations revealed extreme enrichment of Zr, Th, U, Y, Nb, Ta, and REE. Post-magmatic hydrothermal alterations resulted in such pronounced chemical and mineralogical heterogeneity. The hydrothermal fluids are thought to be oxidizing, alkaline and of medium temperature (>?250 °C). The average contents of the elements Zr (1606 ppm), Th (1639 ppm), U (306 ppm), Nb (955 ppm), and REE (1710 ppm) in the mineralized microgranite reach sub-economic levels and could be a potential source of these elements.     

Analysis of physical factors of climate and bioclimate and their effects on almonds production to increase the economy in Hebron area of Palestine

For the 1993–2009 period, we analyzed the relationship between almond yield and three climatic variables (mean annual temperature, soil water reserve, and precipitation), and four bioclimatic variables (annual ombrothermic index, water deficit, simple continentality index, and compensated thermicity index), for one major Hebron crop (soft and hard almonds). Moreover, we obtained data almond production from the Palestinian Central Bureau of Statistics, while the climate data from the Palestinian meteorological station during the study period from 1993 to 2009, and analysis is it by using bioclimatic classification of the Earth of Salvador Rivas-Martinez to study the relationship between the almond yield and climate and bioclimate factors (variables). The climatic and bioclimate variables of greatest importance to almond were used to develop regressions analysis relating yield to climatic conditions. Hebron was positively affected by annual ombrothermic index, simple continentality index, precipitation, water soil reserve, and mean annual temperature, but negatively affected by water deficit, with a large proportion of the variance explained by axis F1 (72.48%), F2 (22.38%), and axes F1and F2 (94. 86%). However, in order to produce a high amount of almonds and quality, it can be grown in the regions of the mesomediterranean region, with the value of annual ombrothemic index more than 3, compensated thermicity index between 220/220 to 350/350, simple continentality index between 14 and 20, and in areas where the average annual temperature is between 15 and 20 °C.     

Automatic identification of fake patterns caused by short-width wavelets in seismic data

Despite the popularity of using the Haar wavelet filter in many applications, it sometimes introduces fake patterns into the multi resolution analysis (MRA) of seismic data. In this work, we compared different wavelet filters to demonstrate that these patterns are fake and not part of the original waveforms and to show that they are a result of using the Haar wavelet filter as a short-width wavelet. To achieve this, many seismic waveforms from two different sources: the Egyptian National Seismic Network (ENSN) and the High Sensitivity Seismograph Network Japan (Hi-net) are used with different wavelet filters. We propose an algorithm based on an autoregressive (AR) model to detect these patterns automatically and fully.     

Compressive and Tensile Behavior of Polymer Treated Sulfate Contaminated CL Soil

In this study, the compressive and tensile behavior of polymer treated sulfate contaminated CL soil was investigated. Based on the information in the literature, a field soil was contaminated with up to 4 % (40,000 ppm) of calcium sulfate in this study. In addition to characterizing the behavior of sulfate contaminated CL soil, the effect of treating the soil with a polymer solution was investigated and the performance was compared to 6 % lime treated soil. In treating the soil, acrylamide polymer solution (15 g of polymer dissolved in 85 g of water) content was varied up to 15 % (by dry soil weight). Addition of 4 % calcium sulfate to the soil decreased the compressive and tensile strengths of the compacted soils by 22 and 33 % respectively with the formation of calcium silicate sulfate [ternesite Ca₅(SiO₄)₂SO₄)], magnesium silicate sulfate (Mg₅(SiO₄)₂SO₄) and calcium-magnesium silicate (merwinite Ca₃Mg(SiO₄)₂). With the polymer treatment the strength properties of sulfate contaminated CL soil was substantially improved. Polymer treated sulfate soils had higher compressive and tensile strengths and enhanced compressive stress–strain relationships compared to the lime treated soils. Also polymer treated soils gained strength more rapidly than lime treated soil. With 10 % of polymer solution treatment, the maximum unconfined compressive and splitting tensile strengths for 4 % of calcium sulfate soil were 625 kPa (91 psi) and 131 kPa (19 psi) respectively in 1 day of curing. Similar improvement in the compressive modulus was observed with polymer treated sulfate contaminated CL soil. The variation of the compacted compressive strength and tensile strength with calcium sulfate concentrations for the treated soils were quantified and the parameters were related to calcium sulfate content in the soil and polymer content. Compressive stress–strain relationships of the sulfate soil, with and without lime and polymer treatment, have been quantified using two nonlinear constitutive models. The constitutive model parameters were sensitive to the calcium sulfate content and the type of treatment.