A new evaluation of seismic hazard for the northwestern part of Saudi Arabia

Natural Hazards - A new evaluation of seismic hazard in the northwestern part of Saudi Arabia area has been carried out, for the minimization and mitigation of earthquake losses. The study area...     

The geoaccumulation index and enrichment factor of mercury in mangrove sediment of Port Klang, Selangor, Malaysia

Mangrove areas are important to the ecosystem. One of its crucial functions is as a sink of pollutants, especially metal ions. However, the accumulation of metals in mangrove sediment can generate negative impacts on plant growth, microbial activity, and soil fertility. Apart from that, the severity of the impact is highly influenced by the type of metal found in the sediment and the quality of sediment itself. One of the metals that have adverse effects on the environment is mercury. The objectives of this study are to determine the concentration and distribution of mercury and to assess the enrichment of mercury in Port Klang mangrove sediment by using geoaccumulation index and enrichment factor. Sediment samples were collected from 30 sampling points that cover Langat River and Klang River estuaries, Lumut Straits, Pulau Klang, and Pulau Indah. During sampling, water parameters such as pH, salinity, electrical conductivity, and total dissolved solids were measured in situ, whereas the total mercury in sediment samples was determined at the laboratory using inductively coupled plasma mass spectrometry. In this study, mercury was found to be concentrated along Lumut Strait especially in the mixing zone near the confluence of Langat River and at the jetty to Pulau Ketam. The geoaccumulation index and enrichment factor (calculated using logarithmized data of the reference element) found that three stations were enriched with mercury. In addition, geoaccumulation index was also observed to be more objective compared to enrichment factor whose results were influenced by the concentration of reference element used.     

Leaching capabilities of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) at different concentrations and pH for some major and trace metals from coal and coal fly ash

In the present study, coal from Chakwal (Pakistan) was leached with an aqueous solutions of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) of different concentrations. The effect of stirring time, concentration and pH was studied on the leaching of different metals from coal. The physicochemical parameters indicated that the coal was of reasonably good quality. The results indicated that with increase in time duration, the extraction of metals increased. In most of the cases, metal concentration increased in the leachate with increasing the concentration of the leaching agents. DPTA was found to be the best leaching agent for most of the metals. Higher extraction of metals from coal fly ash indicated that coal organic matter has a pronounced effect on the leaching. Higher concentration of metals was extracted from virgin coal and coal fly ash at low pH (p?>?0.00) as compared to high pH. DPTA extracted metals in higher concentration from virgin coal and coal fly ash at low pH as compared to ICl. Based on the present study, the most leached metals were Fe, Cu, Mn and the least were Pb, Ni, Cd and Cr.     

An application of three-dimensional electrical resistivity imaging for the detection of an underground waste-water system

A 3D electrical resistivity imaging survey is presented in this paper. The objective was to investigate an underground wastewater system at the University of Malaya, Malaysia. Apparent resistivity data were collected along ten parallel lines using a Wenner-Schlumberger configuration; electrode cables were oriented in the x-direction with 3 m spacing. Roll-along measurements using a line spacing of 3 m were carried out covering a grid of 20 × 10 electrodes. All data sets were merged into a single data file in order to perform a 3D inversion. Two different 3D least squares algorithms, based on the robust inversion method and the smoothness-constrained technique, were used for the inversion of the apparent resistivity data. Both the horizontal and vertical extents of the anomalous zones found by inversion are displayed. The results indicate the superiority of the robust inversion method over the smoothness-constrained technique at this site. The results are in sufficient accordance with previously known information about the investigation area. The results show that 3D electrical resistivity imaging surveys, in combination with an appropriate 3D inversion method, can be highly useful for engineering and archaeological investigations as well as for environmental applications.     

Petrogenesis and tectonic setting of bimodal volcanism in the Sakoli Mobile Belt, Central Indian shield

The Sakoli Mobile Belt comprises bimodal volcanic rocks that include metabasalt, rhyolite, tuffs, and epiclastic rocks with metapelites, quartzite, arkose, conglomerate, and banded iron formation (BIF). Mafic volcanic rocks are tholeiitic to quartz‐tholeiitic with normative quartz and hypersthene. SiO₂ shows a large compositional gap between the basic and acidic volcanics, depicting their bimodal nature. Both the volcanics have distinct geochemical trends but display some similarity in terms of enriched light rare earth element–large ion lithophile element characteristics with positive anomalies for U, Pb, and Th and distinct negative anomalies for Nb, P, and Ti. These characteristics are typical of continental rift volcanism. Both the volcanic rocks show strong negative Sr and Eu anomalies indicating fractionation of plagioclases and K‐feldspars, respectively. The high Fe/Mg ratios for the basic rocks indicate their evolved nature. Whole rock Sm–Nd isochrons for the acidic volcanic rocks indicate an age of crystallization for these volcanic rocks at about 1675 ± 180 Ma (initial ¹⁴³Nd/¹⁴⁴Nd = 0.51017 ± 0.00017, mean square weighted deviate [MSWD] = 1.6). The εNd_t (t = 2000 Ma) varies between ?0.19 and +2.22 for the basic volcanic rock and between ?2.85 and ?4.29 for the acidic volcanic rocks. Depleted mantle model ages vary from 2000 to 2275 Ma for the basic and from 2426 to 2777 Ma for the acidic volcanic rocks, respectively. These model ages indicate that protoliths for the acidic volcanic rocks probably had a much longer crustal residence time. Predominantly basaltic magma erupted during the deposition of the Dhabetekri Formation and part of it pooled at crustal or shallower subcrustal levels that probably triggered partial melting to generate the acidic magma. The influence of basic magma on the genesis of acidic magma is indicated by the higher Ni and Cr abundance at the observed silica levels of the acidic magma. A subsequent pulse of basic magma, which became crustally contaminated, erupted as minor component along with the dominantly acidic volcanics during the deposition of the Bhiwapur Formation.     

ANALYSIS OF FOLDS SOUTH OF MALAKAND AND ADJOINING AREAS, NORTH PAKISTAN

ANALYSIS OF FOLDS SOUTH OF MALAKAND AND ADJOINING AREAS, NORTH PAKISTAN1　Can啨ｒｏｔＪ,QuG .CuadernosdeGeologiaiberica ,1998,2 4:311～ 331. 2　DebelmasJ,MascleG .EnsSciencesdelaTerre[M ].Masson ,ed .1991.2 99.3　GaetaniM ,GarzantiE .AAPGBull ,1991,75 (9) :142 7～ 144 6 . 4　HendrixMS ,GrahamSA ,CarrollAR ,etal.GeolSocAmBull,1992 ,10 4:5 3～ 79.. 5　Jia ,Coll.PetroleumIndustryPress,Beijing .1997,2 95 . 6　JiaD ,LuHCaiD ,etal.AAPGBull ,8…     

ASSESSMENT OF 17β-ESTRADIOL IN AQUATIC ENVIRONMENTS AROUND KLANG VALLEY, MALAYSIA

This study was conducted to assess the existing concentration of 17β-estradiol(E2)in the surface water samples collected from rivers and lakes around Klang Valley,Malaysia.E2,which is a natural feminizing chemical produced in female organisms,regularly used to compare with other environmental estrogens because they behave similarly and react effectively as a hormone at a very low concentration.It was found that the average concentration of E2 in the aquatic environment of Klang Valley was(14.08 ±3.67)pg/mL,which was 14 times higher than those in the Japanese aquatic environment in this study.The river system had the average concentration of(20.02±5.26)pg/mL while the lake had an average concentration of(5.91±3.39)pg/mL.The E2 concentration was presumed high if the sources occurred nearby the area.Current levels of E2 in the aquatic environment may possess threats to existing aquatic organisms.Since high level of E2 has been discovered in the aquatic environment around Klang Valley,further studies and monitoring of E2 and other EDCs concentrations are needed to determine their levels in Malaysian aquatic environment and help to control these chemicals pollution in the aquatic environment.     

Development of Tide–Surge Interaction Model for the Coastal Region of Bangladesh

In this paper, a two-dimensional, vertically integrated hydrodynamic model is developed taking into account entrained air bubbles during storm surges as well as incorporating inverted barometer, and river and land dynamics. The model is specifically designed for the coastal region of Bangladesh. A nested scheme method with a fine mesh scheme (FMS), capable of incorporating the complex coastline and all major offshore islands accurately, nested into a coarse mesh scheme (CMS) covering up to 15° N latitude in the Bay of Bengal is used. To incorporate the small and big offshore islands in the Meghna estuarine region with its complex coastline accurately, a very fine mesh scheme (VFMS) is again nested into the FMS. Along the northeast corner of the VFMS, the Meghna river discharge is taken into account. The coastal and island boundaries are approximated through proper stair steps. The model equations are solved by a semi-implicit finite difference technique using a staggered C-grid. A stable appropriate tidal condition over the model domain is generated by applying tidal forcing with the four major tidal constituents M ₂, S ₂, K ₁, and O ₁ along the southern open boundary of the CMS. This tidal regime is introduced as the initial state of the sea for nonlinear interaction of tide and surge. The model is applied to simulate water levels due to the interaction of tide and surge associated with the cyclones April 1991 and Aila at different coastal and island locations along the coast of Bangladesh. The results are found to be quite satisfactory with root mean square error of ～0.50 m as calculated for both the storm events. Tests of sensitivities on water levels are carried out for air bubbles, offshore islands, river discharge, inverse barometer, and grid resolution. The presence of air bubbles increases simulated water levels a little bit in our model, and the contribution of air bubbles in increasing water level is found around 2 %. Further, water levels are found to be influenced by offshore islands, river discharge, inverse barometer as well as grid resolution.     

Mineralogy, geochemistry, and origin of felsic dike swarms in Aqaba complex (Wadi Al-Yutum), South Jordan

The present work deals with the geologic setting and mineralogical and geochemical study of Late Precambrian magmatic rocks especially the felsic dike swarms of northeast Aqaba complex in South Jordan. The northeast Aqaba complex represents one of the most significant regions in the South Jordan basement. The basement rocks in the studied region are composed of schists, gneisses, migmatites, met gabbros, diorite, and granite. It is invaded by post-orogenic dike swarms. The post-orogenic dike swarms have been recognized as felsic dikes of dacite, rhyodacite, and rhyolite composition. They are composed of plagioclase, K-feldspar, quartz, biotite, and hornblenble with a porphyritic texture. Chemically, they are enriched in compatible elements especially in the large ion lithophile elements such as K, Rb, and Ba. The values of A/NK are more than A/CNK, indicating that dacitic dike swarms have metaluminous nature. Meanwhile, the values of A/NK are less than A/CNK in rhyodacitic and rhyolitic dike swarms of prealuminous nature. This felsic dike can be related to an intercontinental setting that was accompanied by a chemical evolution of the extensional movements and is formed by partial melting of crustal rocks, which are already known from other areas in the northeast portion of the Arabian-Nubian Shield.     

Effects of natural and calcined poultry waste on Cd, Pb and As mobility in contaminated soil

The reuse of waste materials as soil additives could be a welcome development in soil remediation. The mobility of Cd, Pb and As in a contaminated soil was investigated using natural and calcined poultry wastes (eggshell and chicken bone), CaCO₃ and CaO at different application rates (0, 1, 3 and 5 %). The chemical composition accompanied with mineralogical composition indicated that CaCO₃ and CaO were the major components in natural and calcined eggshells, respectively, while hydroxyapatite (HAP) dominated the natural and calcined chicken bones. The results showed that soil pH tended to increase in response to increasing application rates of all soil additives. The effectiveness of the additives in reducing Cd, Pb and As mobility was assessed by means of chemical extractions with 0.1 N HCl for Cd and Pb or 1 N HCl for As, according to Korean Standard Test (KST) method. Both calcined eggshell and chicken bone were equally effective with CaO or CaCO₃ in reducing the concentration of 0.1 N HCl-extractable Cd from 6.17 mg kg^?1 to below warning level of 1.5 mg kg^?1, especially at the highest application rate. The application of calcined eggshell, CaO and CaCO₃ also decreased the concentration of 0.1 N HCl-extractable Pb from 1,012 mg kg^?1 to below warning level of 100 mg kg^?1. The Pb concentration decreased significantly with an increasing application rate of chicken bone, but remained above warning level even at the highest application rate. On the contrary, natural and calcined chicken bones led to a significant increase in the mobility of As when compared with the control soil. These findings illustrate that calcined eggshell in particular is equally effective as pure chemical additives in stabilizing Cd and Pb in a contaminated agricultural soil. The presence of As in metal-contaminated soils should be taken into consideration when applying phosphate-containing materials as soil additives, because phosphate can compete with arsenate on adsorption sites and result in As mobilization.