Baseline metals pollution profile of tropical estuaries and coastal waters of the Straits of Malacca

The status report on metal pollution in tropical estuaries and coastal waters is important to understand potential environmental health hazards. Detailed baseline measurements were made on physicochemical parameters (pH, temperature, redox potential, electrical conductivity, salinity, dissolved oxygen, total dissolved solid), major ions (Na, Ca, Mg, K, HCO₃, Cl, SO₄ and NO₃) and metals concentrations (²⁷Al, ⁷⁵As, ¹³⁸Ba, ⁹Be, ¹¹¹Cd, ⁵⁹Co, ⁶³Cu, ⁵²Cr, ⁵⁷Fe, ⁵⁵Mn, ⁶⁰Ni, ²⁰⁸Pb, ⁸⁰Se, ⁶⁶Zn) at estuaries and coastal waters along the Straits of Malacca. Principal component analysis (PCA) was employed to reveal potential pollution sources. Seven principal components were extracted with relation to pollution contribution from minerals-related parameters, natural and anthropogenic sources. The output from this study will generate a profound understanding on the metal pollution status and pollution risk of the estuaries and coastal system.     

Climatic prediction of the terrestrial and coastal areas of Iraq

Climatic data from four meteorological stations in Iraq (Mosul, Baghdad, Basra, and Rutba) were obtained. The recorded temperature data since 1960 till 2007 and rainfall and evaporation data since 1960 till 2008 and 1970 till 2008, respectively, were used and interpreted. This study showed an increase in temperature of about 5°C/47?years and an increase in evaporation rate with a decrease in the rainfall rate. Carbon dioxide in the atmosphere appears to be a factor controlling climate change. Basra climate, due to its location which is nearest to the Arabian Gulf, is expressed as a coastal climate and has a different behavior from Mosul, Baghdad, and Rutba, which are considered as terrestrial climates.     

Drought analysis in Jordan under current and future climates

Droughts have adverse socioeconomic, agricultural, and environmental impacts that can be reduced by assessing and forecasting drought behavior. The paper presents detailed analyses of both meteorological and vegetative droughts over the period from 1970 to 2005. Standardized Precipitation Index (SPI) and Normalized Difference Vegetation Index (NDVI) have been used to quantify drought according to severity, magnitude and spatial distribution at the Hashemite Kingdom of Jordan. Results suggest that the country faced during the past 35 years frequent non-uniform drought periods in an irregular repetitive manner. Drought severity, magnitudes and life span increased with time from normal to extreme levels especially at last decade reaching magnitudes of more than 4. Generated NDVI maps spatial analyses estimate crop-area percentage damage due to severe and extremely severe drought events occurred during October, December, and February of 2000 to be about 10%, 45%, and 30%, respectively. In response to drought spatial extent, the paper suggest the presence of two drought types, local drought acting on one or more geographical climatic parts and national drought, of less common but more severe, that extend over the whole country. Droughts in Jordan act intensively during January, February and March and tend to shift position with time by alternative migrations from southern desert parts to northern desert parts and from the eastern desert parts to highlands and Jordan Rift Valley (JRV) at the west. The paper also investigates the potential use of Global Climate Model’s (GCM) to forecast future drought events from 2010 till 2040. Tukey HSD test indicates that ECHAM5OM GCM is capable to predicted rainfall variation at the country and suggests future droughts to become more intensive at the northern and southern desserts with 15% rainfall reduction factor, followed by 10% reduction at the JRV, and 5% at the highlands.     

Field test to compare 3D imaging capabilities of three arrays in a site with high resistivity contrast regions

The applicability of three kinds of electrode configurations used to delineate a buried horizontal pipe was studied. A 3D resistivity imaging survey was carried out along eight parallel lines using pole-pole, pole-dipole, and dipole-dipole arrays with 1m minimum electrode spacings. Roll-along measurements were carried out to cover a rectangular grid. The 2D and 3D least squares algorithms based on the robust inversion method were used in the inversion of the apparent resistivity data sets. The 2D inversion of data sets could not delineate the orientation and dimension of the subsurface anomalies clearly. To obtain more accurate results, a 3D joint inversion of the pole-pole and pole-dipole data sets was performed, as well as of pole-pole and dipole-dipole data sets. In this case, both horizontal and vertical dimensions of subsurface structures were resolved. The resulting model obtained from each array was compared to those of joint inversion method. The result showed that the horizontal resolution does not improve so much as that in the vertical direction when joint inversion is applied.     

Chromium Removal through Biosorption and Bioaccumulation by Bacteria from Tannery Effluents Contaminated Soil

Four bacterial isolates (two resistant and two sensitive to chromium) were isolated from soil contaminated with tannery effluents at Jajmau (Kanpur), India, and were identified by 16S rDNA gene sequencing as Stenotrophomonas maltophilia, Exiguobacterium sp., Pantoea sp., and Aeromonas sp. Biosorption of chromium by dried and living biomasses was determined in the resistant and sensitive isolates. The effect of pH, initial metal concentration, and contact time on biosorption was studied. At pH 2.5 the living biomass of chromium resistant isolate Exiguobacterium sp. ZM‐2 biosorbed maximum amount of Cr⁶⁺ (29.8 mg/g) whereas the dried biomass of this isolate biosorbed 20.1 mg/g at an initial concentration of 100 mg/L. In case of chromate sensitive isolates, much difference was not observed in biosorption capacities between their dried and living biomasses. The maximum biosorption of Cr³⁺ was observed at pH 4.5. However, biosorption was identical in resistant and sensitive isolates. The data on chromium biosorption were analyzed using Langmuir and Freundlich isotherm model. The biosorption data of Cr⁶⁺ and Cr³⁺ from aqueous solution were better fitted in Langmuir isotherm model compared to Freundlich isotherm model. Metal recovery through desorption was observed better with dried biomasses compared to the living biomasses for both types of chromium ions. Bioaccumulation of chromate was found higher in chromate resistant isolates compared to the chromate sensitive isolates. Transmission electron microscopy confirmed the accumulation of chromium in cytoplasm in the resistant isolates.     

Seasonal Changes in Mayfly Communities and Abundance in Relation to Water Physicochemistry in Two Rivers at Different Elevations in Northern Peninsular Malaysia

A field study was performed at rivers in Gunung Jerai forest reserve(Kedah,Malaysia) to assess seasonal changes in mayfly community structure and abundance in relation to altitude and water physicochemistry.Rivers at lower(Batu Hampar River) and higher(Teroi River) elevations were visited through dry and wet seasons in September 2007 to August 2008.Monthly visits were made to 20 sites on each river,and water and aquatic insects were sampled using D-pond aquatic nets.Water was warmer,more acid,and more turbid in Teroi River during wet season.Ammonia was the only nutrient exhibiting significant seasonal variations(greater during wet season).Chemical oxygen demand content was higher in Teroi River where biochemical oxygen demand content was low during wet season.Species richness was higher in Batu Hampar River,but displayed seasonal variations only in Teroi River.Among the eight families encountered,Baetidae was the commonest.Baetid abundance was usually high during wet season,and those belonging to the dominant genus(Baetis) were more abundant in Teroi River.Heptageniidae was the second commonest family;its predominant genus,Thalerospyrus was more abundant in Teroi River during dry season.Caenidae,Leptophlebiidae and Oligoneuriidae were only found in Batu Hampar River where their abundances peaked during dry season,i.e.,Habrophlebiodes sp.and Isonychia sp.Ephemerellidae and Teloganodidae occurred only in Teroi River,with the first found only during dry season.Mayflies were recorded under very distinct physicochemical conditions,illustrating their potential usefulness for assessing water quality.Caenids,leptophlebids,oligoneurids ephemerellids and teloganodids seem to be particularly sensitive to temperature,acidity,turbidity,chemical oxygen demand and biochemical oxygen demand,parameters that varied with river altitude.     

New chelating resin for preconcentration and determination of molybdenum by inductive couple plasma atomic emission spectroscopy

A chelating resin is prepared by condensation polymerization of aniline with formaldehyde and characterized by Fourier transform infrared spectrometer, elemental analysis and thermogravimetric analysis and studied for the preconcentration and determination of trace Molybdate ion from environmental water sample using inductive couple plasma atomic emission spectroscopy. The optimum pH value for sorption of the metal ion was 5. The sorption capacity of functionalized resin is 3.1 mg/g. The chelating sorbent can be reused for 20 cycles of sorption-desorption without any significant change in sorption capacity. The best desorption of the metal ions from resin was obtained by 0.5 mol/L nitric acid as eluting agent. The profile of molybdenum uptake on this sorbent reflects good accessibility of the chelating sites in the aniline-formaldehyde. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. The equilibrium adsorption data of Molybdate ion modified resin were analyzed by five isotherm models such as Langmuir, Freundlich and Temkin. Langmuir isotherm parameters obtained from the four Langmuir linear equations by using linear method. Based on the Langmuir isotherm analysis, the monolayer adsorption capacity was determined to be 4.03 mg/g at 20 °C. The method was applied for molybdenum ions determination from river water sample.     

Region of motion in the Sitnikov four-body problem when the fourth mass is finite

This article deals with the region of motion in the Sitnikov four-body problem where three bodies (called primaries) of equal masses fixed at the vertices of an equilateral triangle. Fourth mass which is finite confined to moves only along a line perpendicular to the instantaneous plane of the motions of the primaries. Contrary to the Sitnikov problem with one massless body the primaries are moving in non-Keplerian orbits about their centre of mass. It is investigated that for very small range of energy h the motion is possible only in small region of phase space. Condition of bounded motions has been derived. We have explored the structure of phase space with the help of properly chosen surfaces of section. Poincarè surfaces of section for the energy range ?0.480≤h≤?0.345 have been computed. We have chosen the plane (q ₁,p ₁) as surface of section, with q ₁ is the distance of a primary from the centre of mass. We plot the respective points when the fourth body crosses the plane q ₂=0. For low energy the central fixed point is stable but for higher value of energy splits in to an unstable and two stable fixed points. The central unstable fixed point once again splits for higher energy into a stable and three unstable fixed points. It is found that at h=?0.345 the whole phase space is filled with chaotic orbits.     

Timescales of partial melting in the Himalayan middle crust: insight from the Leo Pargil dome, northwest India

The Leo Pargil dome (LPD) in northwest India exposes an interconnected network of pre-, syn-, and post-kinematic leucogranite dikes and sills that pervasively intrude amphibolite-facies metapelites of the mid-crustal Greater Himalayan sequence. Leucogranite bodies range from thin (5-cm-wide) locally derived sills to thick (2-m-wide) crosscutting dikes extending at least 100 m. Three-dimensional exposures elucidate crosscutting relations between different phases of melt injection and crystallization. Combined laser ablation inductively coupled plasma mass spectrometry U–Th/Pb geochronology and trace element analysis on well-characterized monazite grains from nineteen representative leucogranites yields a large, internally consistent data set of approximately 700 U–Th/Pb and 400 trace element analyses. Grain-scale variations in age correlate with trace element distributions and indicate semi-continuous crystallization of monazite from 30 to 18 Ma. The youngest U–Th/Pb ages in a given sample are consistent with the outcrop-scale crosscutting relations, whereas older ages within individual samples record inheritance from partially crystallized melt and source metapelites. U–Th/Pb isotopic and trace element data are incorporated into a model of melting within the LPD that involves (1) steady-state equilibrium batch melting of compositionally homogeneous metapelitic sources; (2) pulses of increased melt mobility lasting 1–2 m.y. resulting in segregation of melt from its source and amalgamation into mixed magmas; and (3) rapid emplacement and final crystallization of leucogranite bodies. Melt systems in the LPD evolved from locally derived, in situ melt in migmatitic source rocks into a vast network of dikes and sills in the overlying non-migmatitic host rocks.     

The origin of tin deposits in the Mount Wells region,Pine Creek Geosyncline,Northern Territory

Tabular steeply dipping cassiterite‐bearing lodes in the Mount Wells region are hosted by lower greenschist fades metasediment of the Pine Creek Geosyncline within the contact aureole of late orogenic granitoids. The latter are predominantly I‐type, but S‐type phases are developed near the sediment‐granitoid contact.

Quartz, cassiterite, pyrite, arsenopyrite, chalcopyrite and pyrrhotite are the main minerals. Two types of lodes are present: (i) Sn‐quartz lodes containing 5–10 vol% sulphide minerals; and (ii) Sn‐sulphide lodes containing ～ 70 vol% sulphide minerals. At the surface, the former appear as normal quartz veins and the latter as hematite‐quartz breccia resulting from the collapse of original sulphide‐rich lodes as a consequence of volume reduction due to oxidation and leaching.

Two stages of quartz veining are recognized in both types of lodes. Cassiterite is present in stage I while stage II is composed of barren quartz with minor pyrite. Late stage III carbonate veinlets are present in Sn‐sulphide lodes. The lode‐wallrock contact is sharp with weak alteration effects confined to the fringe of the lodes. The alteration minerals include sericite, quartz, tourmaline, chlorite, pyrite and minor K‐feldspar.

Four types of fluid inclusions are present in vein quartz and cassiterite: Type A (CO₂ ± H₂O ± CH₄); Type B (H₂O+～ 20% vapour); Type C (H₂O+ < 15% vapour) and Type D (H₂O+ < 15% vapour + NaCl). Early ‘primary’ inclusions represented by Types A and B are present in stage I only and have a well‐defined temperature mode at ～300°C and a salinity range of 1–20 wt% eq NaCl. Types C and D inclusions are ‘secondary’ in stage I and primary in stage II and have a temperature mode at 120–160°C and salinities from about 1 to more than 26 wt% eq NaCl. Variable H₂O‐CO₂ ratios of Type A inclusions and homogenization in CO₂ or H₂O phase at near identical temperature indicate entrapment at the H₂O‐CO₂ solvus and define a pressure of ～ 100 MPa. The melting sequence of frozen inclusions suggests that the ore fluids were mainly H₂O‐CO₂‐CH₄‐Na‐Ca‐Cl brines. This is also confirmed by Raman Laser Spectrometry.

Oxygen and sulphur isotope data are consistent with a magmatic origin of the ore fluids. The δD values are up to 20%0 higher than those expected for magmatic fluids and probably resulted from interaction of the latter with the carbonaceous strata. This interpretation is supported by δ¹³C data on the fluid inclusion CO₂.

Fluid inclusions, stable isotope and mineralogical data are used to approximate the physico‐chemical parameters of the ore fluids which are as follows: T 300°C, m Cl～2, fO₂ ～ 10^‐35, mSS ～ 0.01, Sn ～ 1 ppm, Cu ～ 1 ppm and pH ～ 5.5.

It is suggested that fluids of granitic parentage interacted with the enclosing sediment and picked up CO₂, CH₄ and possibly Ca. The granitic phases became reduced due to this interaction and developed S‐type characteristics. Tin was probably partitioned into the CH₄‐bearing reduced fluids. At some stage the fluid overpressure exceeded the lithostatic lode enforcing failure of the carapace and the intruded rocks by hydraulic fracturing causing CH₄ and CO₂ loss resulting in the precipitation of the ore minerals.