Application of organic petrology and geochemistry to coal waste studies

Coal wastes produced during mining activities are commonly deposited in nearby dumps. These wastes mostly composed of minerals and variable amounts (usually 20-30%) of organic matter start to weather immediately after deposition. Oxidation of the organic matter can lead to self heating and self combustion as a result of organic and mineral matter transformations. The degree of alteration depends on the properties of the wastes, i.e., the maceral and microlithotype composition of the organic matter and its rank.Alteration of wastes also depends on the heating history, i.e., the rate of heating, final heating temperature, duration of heating, and the degree of air access. Although air is probably necessary to initiate and drive the heating processes, these usually take place under relatively oxygen depleted conditions. With slow heating, color of organic matter particles changes, irregular cracks and oxidation rims develop around edges and cracks, and bitumen is expelled. As a result, massive and detritic isotropic and strongly altered organic matter forms. On the other hand, higher heating rates cause the formation of devolatilization pores, oxidation rims around these pores and along cracks, vitrinite-bands-mantling particles, and bitumen expulsions.Organic compounds generated from the wastes include n-alkanes, iso-alkanes, alkylcyclohexanes, acyclic isoprenoids, mainly pristane, phytane and, in some cases, farnesane, sesquiterpanes, tri- and tetracyclic diterpanes, tri- and pentacyclic triterpanes, and steranes, polycyclic aromatic hydrocarbons (mostly with two- to five rings, rarely six rings), and phenols. The compounds formed change during the heating history. The fact that phenols are found in dumps where heating has not yet been completed, but are absent in those where heating ceased previously suggests the presence of water washing. The organic compounds formed may migrate within the dumps. However, when they migrate out of the dumps, they become a hazard to environment.This paper is a review on transformations of organic matter (both maceral composition and reflectance and chemical composition) in coal wastes deposited in coal waste dumps. Immediately after deposition the wastes are exposed to weathering conditions and sometimes undergo self heating processes.     

A SIMS zircon age for a biostratigraphically dated Upper Viséan (Asbian) bentonite in the Central-European Variscides (Bardo Unit,Polish Sudetes)

A Lower Carboniferous platform sedimentary sequence (the Paprotnia Beds) in the Bardo Unit of the central Sudetes (NE part of the Bohemian Massif, SW Poland) is biostratigraphically well dated, based on rich macro- and micro-fossil evidence, as Late Viséan (late Asbian, crenistria, Go III α zone). The beds contain several bentonite layers, one of which was dated using the U–Pb SHRIMP method on volcanic zircons and yielded an age of 334 ± 3 Ma. This date fits well to the recently established chronostratigraphic limits of the Viséan, and is consistent with the newest isotopic age constraints of 336.5–332 Ma for the Asbian boundaries.     

Early Carboniferous (Viséan) emplacement of the collisional Kłodzko–Złoty Stok granitoids (Sudetes, SW Poland): constraints from geochemical data and zircon U–Pb ages

Sensitive high-resolution ion microprobe zircon U–Pb dating and geochemical data of igneous rocks from the composite K?odzko–Z?oty Stok (KZS) Granite Pluton, Sudetic Block, indicate that the granitoids represent an Early Carboniferous Viséan phase of Variscan metaluminous, high-K, I-type, syn-collisional granite magmatism within the Saxothuringian Zone of the Central European Variscides. Igneous zircon records hypabyssal magmatism that produced various granitoids and lamprophyre (spessartite) emplaced from ca. 340 to 331 Ma. The KZS granitoids have compositions ranging from granodiorite to monzonite, low A/CNK ratios (<1), and are associated with abundant mafic members. Most of them are alkaline, highly potassic, and moderately evolved. The major and trace element contents of the KZS granitoids suggest geochemical heterogeneity, and the hybrid nature of magmas derived from a range of sources in the middle crust, with a strong input of material from the upper mantle. Mixing of magmas of mantle origin with high-K material from partly melted continental crust was probably a more important factor than fractional crystallization, in controlling the evolution of the magmas. The mean Pb–U ages of the main population of igneous zircon from a quartz monzodiorite (?elazno) and hornblende monzonite (Droszków) are 340.2 ± 2.5 Ma and 339.5 ± 3.1 Ma, respectively. A slightly younger biotite-hornblende granodiorite from Chwalis?aw, 336.7 ± 2.5 Ma, was cut by a spessartite dyke at 333.1 ± 3.1 Ma. This indicates that mafic magmas were immediately intruded into fractured, probably incompletely solidified, granodiorites. The lamprophyric dyke also contains igneous zircon of Neoproterozoic age, 566.3 ± 6.4 Ma, typical of the crust in the Saxothuringian Zone. Tonalite from Ptasznik Hill near Droszków is of similar age to the spessartite, 331.5 ± 2.6 Ma. High REE contents in the tonalite and its igneous zircon indicate advanced differentiation of granitic magma, producing a more leucocratic melt associated with post-magmatic activity including abundant late crosscutting pegmatites and quartz veins, and contact metasomatic mineralization. The KZS granitoids have rather similar petrographic and geochemical characteristics to granitoids from other parts of the Central European Variscides, where a thickened orogenic root caused a substantial rise in crustal temperatures, producing granitoid magmas closely correlated with regional tectonic activity between the Saxothuringian and Brunovistulia Terranes at the NE margin of the Bohemian Massif.     

Sequential granite emplacement: a structural study of the late Variscan Strzelin intrusion, SW Poland

The Strzelin Massif in SW Poland (Central European Variscides) records a protracted igneous evolution, with three main magmatic stages: (1) tonalitic I, (2) granodioritic and (3) tonalitic II/granitic. In the northern part of this Massif, the Strzelin intrusion proper comprises three successively emplaced rock types: a medium-grained biotite granite (303 ± 2 Ma), a fine-grained biotite granite (283 ± 8 Ma) and a fine-grained biotite-muscovite granite; based on field evidence, the third variety postdates both types of the biotite granites. The structural data from the three granites, including their parallel, approximately E–W striking and steeply dipping lithological contacts and ENE–WSW trending subhorizontal magmatic lineations, suggest that the emplacement of all three successive granite varieties was controlled by an active, long-lived strike-slip fault, striking ESE–WNW, with a dextral sense of movement. After the emplacement of the youngest biotite-muscovite granite, the intrusion underwent brittle extension which produced “Q joints” striking NNW–SSE to N–S and dipping at 55–70° WSW to W, and showing evidence of broadly N–S directed sinistral displacements. The structural observations, supported by new geochronological data, indicate that the internal structure of the composite granitoid intrusion, including the faint magmatic foliation and lineation, formed in a long-lived strike-slip setting, different from the subsequent, post-emplacement extensional tectonics that controlled the development of brittle structures.     

Impact of microtopography on the geochemistry of soils within archaeological sites in SE Poland

The geochemical record of human impact within three archaeological sites in SE Poland was analysed. The total levels of Cd, Cu, Pb, Zn and P were defined. The content of the studied elements was found to be higher than the determined geochemical background. In all cases, significantly higher concentrations (2–3 times) of trace metals were found in sediments filling small depressions and foot-slope locations. These concentrations were often higher than in the profiles within the archaeological objects. The vertical distributions of elements were also different from soil profiles located on flat surfaces. The study thus confirms that microtopography and soil erosion may impact (diversify) the initial horizontal and vertical variation of geochemistry of soils within archaeological sites caused by human activity. This should be taken into account when using geochemical prospecting in archaeological studies in areas with varied topography.     

Systematic Methodology for Velocity-dependent Gravity Modelling of Density Crustal Cross-Sections, using an Optimization Procedure

The paper describes a new method of gravity modelling of the density cross section along a DSS profile. We propose a systematic procedure of gravity interpretation using structural information contained both in the velocity distribution of the seismic model and the geometry of its layers. The procedure is based on the optimisation of the density parameters of the model. The values of the parameters are limited by relationships between the seismic velocity and the density (optimisation with inequalities). The formulation of the method allows for discussion of the presence of isostasy and the distribution of compensating masses. The discussion is very important for the considered crust-lithosphere system. The presented calculations are done for one Carpathian profile (CEL01). The analysis of the properties of the fitting procedure provides the characteristic depth of subcrustal compensating density structures, the position of crucial tectonic boundaries along the profiles, locations of the crustal areas having exceptional lithology, the regional density differences of subcrustal matter and the estimation of regional deviations from the isostatic equilibrium.     

Meltwater discharge through the subglacial bed and its land‐forming consequences from numerical experiments in the Polish lowland during the last glaciation

Numerical experiments suggest that the last glaciation severely affected the upper lithosphere groundwater system in NW Poland: primarily its flow pattern, velocities and fluxes. We have simulated subglacial groundwater flow in two and three spatial dimensions using finite difference codes for steady‐state and transient conditions. The results show how profoundly the ice sheet modifies groundwater pressure heads beneath and some distance beyond the ice margin. All model runs show water discharge at the ice forefield driven by ice‐sheet‐thickness‐modulated, down‐ice‐decreasing hydraulic heads. In relation to non‐glacial times, the transient 3D model shows significant changes in the groundwater flow directions in a regionally extensive aquifer ca. 90 m below the ice–bed interface and up to 40 km in front of the glacier. Comparison with empirical data suggests that, depending on the model run, only between 5 and 24% of the meltwater formed at the ice sole drained through the bed as groundwater. This is consistent with field observations documenting abundant occurrence of tunnel valleys, indicating that the remaining portion of basal meltwater was evacuated through a channelized subglacial drainage system. Groundwater flow simulation suggests that in areas of very low hydraulic conductivity and adverse subglacial slopes water ponding at the ice sole was likely. In these areas the relief shows distinct palaeo‐ice lobes, indicating fast ice flow, possibly triggered by the undrained water at the ice–bed interface. Owing to the abundance of low‐permeability strata in the bed, the simulated groundwater flow depth is less than ca. 200 m. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of source parameters estimated in the frequency and time domains for seismic events at the Rudna copper mine,Poland

Source parameters estimated in the frequency domain for 100 selected seismic events from the Rudna copper mine, with moment magnitude ranging from 1.4 to 3.6, were collected to study their scaling relations and to compare them with the parameters estimated in the time domain. The apparent stress and static stress drop, corrected for the limited bandwidth recording, increase slightly in a similar manner with increasing seismic moment. The ratio of apparent stress to static stress drop, a measure of radiation efficiency, is practically constant and its mean value is close to 0.1. For 37 seismic events, with moment magnitude between 1.9 and 3.4, source parameters were estimated in the time domain from relative source time functions, that displayed unilateral rupture propagation, and their rupture velocity could be estimated. It ranges from 0.23 to 0.80 of shear wave velocity and is almost independent of seismic moment. The fault length, estimated from the average source pulse width and rupture velocity, is clearly dependent on seismic moment and is smaller than the source radius estimated from the corner frequency on the average by about 25 percent. There is no correlation between the values of static stress drop estimated in the frequency and time domains, but the time domain stress drop is in general similar to that estimated in the frequency domain. The apparent stress increases with increasing rupture velocity, and the ratio of apparent stress to static stress drop seems also to depend on rupture velocity.