Matrix micrite δC and δO reveals synsedimentary marine lithification in Upper Jurassic Ammonitico Rosso limestones (Betic Cordillera, SE Spain)

Matrix micrites are a commonly used carbonate archive for the reconstruction of past environmental parameters, but one that is submitted to known limitations. Main reasons for the often ambiguous value of many micrite-based isotope data sets are the unknown origin of the micrite components and their poorly resolved diagenetic history. Here we present carbon and oxygen-isotope data retrieved from Oxfordian to Tithonian Ammonitico Rosso nodular micrites sampled from three sections in the Betic Cordillera (Southern Spain). All three sections were correlated and sampled using a rigorous biostratigraphic framework. A noteworthy feature is that analyzed matrix micrites are more conservative in terms of their isotopic composition than other carbonate materials commonly considered to resist diagenetic alteration under favourable circumstances. Remarkably, this refers not only to δ¹³C ratios, which reflect the typical Late Jurassic global trend, but also to δ¹⁸O ratios that range around 0.3‰. The ¹⁸O-enriched oxygen-isotope ratios are considered to represent diagenetic stabilization of carbonate ooze under the influence of marine porewaters within the sediment–water interphase (i.e., the immature sedimentary section, usually submitted to biogenic activity). This interpretation agrees with the very early lithification of micrite nodules with cements precipitated from marine porewaters, enriched by the dissolution of aragonite skeletals (i.e., ammonite shells). According to the model proposed, low sedimentation rates as well as rapid early marine differential cementation, under the influence of currents and seawater pumping, affected the sediment–water interphase of epioceanic swells where deposition resulted in early lithified Ammonitico Rosso facies. The data obtained show that special care must be taken to prevent oversimplified interpretations of carbonate archives, particularly in the context of epioceanic settings.     

Spatial geochemistry of a Carboniferous platform-margin-to-basin transect: Balancing environmental and diagenetic factors

Conventional (one-dimensional) chemostratigraphy of marine carbonates assesses the chemical archive of individual stratigraphic sections and their correlation in space and time. Whereas this approach has shown to be of value when linking isobathymetric domains, usually characterised by similar facies, more caution is needed when correlations are extended across different physiographic settings and hence different facies belts. Here, the spatial geochemical record of Pennsylvanian platform-margin-to-basin transects across a bathymetric range of about 800 m is documented and discussed in a process-oriented context. Particularly, the presence of layered palaeo-water masses and their potential control on slope facies distribution and geochemical properties requires attention. Whereas Carboniferous thermo- and/or chemo-clines most likely affected depth-related slope facies zonation, it was facies change and hence, variances in porosity–permeability properties, that controlled differential early burial diagenetic alteration. Specifically, the lower-slope related breccia facies is characterised by higher volumes of early burial carbonate cements. This implies that these sediments entered the shallow-burial domain with a considerable open pore space and gave way to an increased rock:fluid ratio. Whereas the δ¹³C record is invariant with bathymetry, the more diagenesis-sensitive δ¹⁸O proxy, records pronounced shifts observed across major facies boundaries. From this it is concluded that although the primary controlling factor of slope facies distribution with depth is probably palaeoceanographic in nature, it is differential rock:fluid ratios that control the first-order, spatial shifts in δ¹⁸O composition. These findings show that one-dimensional chemostratigraphy will severely underestimate the complexity of three-dimensional (bathymetric) data sets across platform margins. This is of relevance for the interpretation of the geochemical archive of fossil carbonate platforms in general.     

Sea‐level rise impact on fresh groundwater lenses in two‐layer small islands

The fresh groundwater lenses (FGLs) of small islands can be highly vulnerable to climate change impacts, including sea‐level rise (SLR). Many real cases of atoll or sandy islands involve two‐layer hydrogeological conceptualizations. In this paper, the influential factors that affect FGLs in two‐layer small islands subject to SLR are investigated. An analytical solution describing FGLs in circular islands, composed of two geological layers, is developed for the simplified case of steady‐state and sharp‐interface conditions. An application of the developed model is demonstrated to estimate the FGL thickness of some real‐world islands by comparison with existing FGL thickness data. Furthermore, numerical modelling is applied to extend the analysis to consider dispersion effects and to confirm comparable results for both cases. Sensitivity analyses are used to assess the importance of land‐surface inundation caused by SLR, relative to other parameters (i.e. thickness of aquifer layers, hydraulic conductivity, recharge rate and land‐surface slope) that influence the FGL. Dimensionless parameters are used to generalize the findings. The results demonstrate that land‐surface inundation has a considerable impact on a FGL influenced by SLR, as expected, although the FGL volume is more sensitive to recharge, aquifer thickness and hydraulic conductivity than SLR impacts, considering typical parameter ranges. The methodology presented in this study provides water resource managers with a rapid‐assessment tool for evaluating the likely impacts of SLR and accompanying LSI on FGLs.     

On the linear elastic responses of the 2D bonded discrete element model

The bonded discrete element model (DEM) is a numerical tool that is becoming widely used when studying fracturing, fragmentation, and failure of solids in various disciplines. However, its abilities to solve elastic problems are usually overlooked. In this work, the main features of the 2D bonded DEM which influence Poisson's ratio and Young's modulus, and accuracy when solving elastic boundary value problems, are investigated. Outputs of numerical simulations using the 2D bonded DEM, the finite element method, a hyper elasticity analysis, and the distinct lattice spring model (DLSM) are compared in the investigation. It is shown that a shear interaction (local) factor and a geometric (global) factor are two essential elements for the 2D bonded DEM to reproduce a full range of Poisson's ratios. It is also found that the 2D bonded DEM might be unable to reproduce the correct displacements for elastic boundary value problems when the represented Poisson's ratio is close to 0.5 or the long-range interaction is considered. In addition, an analytical relationship between the shear stiffness ratio and the Poisson's ratio, derived from a hyper elasticity analysis and applicable to discontinuum-based models, provides good agreement with outputs from the 2D bonded DEM and DLSM. Finally, it is shown that the selection of elastic parameters used the 2D bonded DEM has a significant effect on fracturing and fragment patterns of solids.     

Edge-to-Stem Variability in Wet-Canopy Evaporation From an Urban Tree Row

Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.     

Evaluating the influence of mixture composition on the kinetics of salt damage in wall paintings using time lapse video imaging with direct data annotation

This paper presents an examination of the timescale of phase transition behaviour of a series of salts known to cause damage to wall paintings and other cultural property. The rate of deliquescence and crystallisation of single salts (nitromagnesite and halite) under different RH regimes, and the extent to which this was affected when mixed with other salts (niter, nitratite and gypsum), was investigated. The study was conducted using simple conventional techniques (mass measurements over time) and also using an innovative new method: timelapse video imaging with online data annotation. The results demonstrate the synergy gained from combining video imaging with environmental data in reference to time in the study of salt phase changes: where it revealed new information concerning the kinetics of deliquescence and crystallisation. The implications of these results for the implementation of environmental control measures within historic buildings are discussed.

Unravelling the evolution of an Alpine to post-glacially active fault in the Swiss Alps

The Gemmi fault is a prominent NW–SE striking lineament that crosses the Gemmi Pass in the central Swiss Alps. A multidisciplinary investigation of this structure that included geological mapping, joint profiling, cathodoluminescence and scanning electron microscopy, stable isotope measurements, luminescence- and U-TH-dating, 3D ground penetrating radar (GPR) surveying and trenching reveals a history of fault movements from the Miocene to the Holocene. The main fault zone comprises a 0.5–3 m thick calcite cataclasite formed during several cycles of veining and brittle deformation. Displaced Cretaceous rock layers show an apparent dextral slip of 10 m along the fault.A detailed study of a small sediment-filled depression that crosses the fault provides evidence for a post-glacial reactivation of the fault. A trench excavated across the fault exposed a Late-Glacial-age loess layer and late Holocene colluvial-like slope-wash deposits that showed evidence for fault displacement of a few centimeters, indicating a recent strike-slip reactivation of the fault. Focal mechanisms of recent instrumentally recorded earthquakes are consistent with our findings that show that the fault at the Gemmi Pass, together with other parallel faults in this area, may be reactivated in today's stress field. Taking together all the observations of its ancient and recent activity, the Gemmi fault can be viewed as a window through geological space and time.