Earthquake-resistant design according to the most unfavourable seismic direction under combined internal forces

In this study it has been shown that, in the case of linear theory, the combined internal forces corresponding to each seismic direction lie on an ellipsoid having internal forces chosen as the set of axes. A method is proposed to obtain the most unfavourable results easily, in the neighbourhood of the several unfavourable points without actually determining the ellipsoid. The design can be carried out using linear, as well as non-linear, theory. Two examples are given to illustrate the application of the proposed method.     

Failure modes of the lineaments on Jupiter's moon, Europa: Implications for the evolution of its icy crust

Lineaments referred to as ridges, troughs, bands, and faults on the icy surface of Jupiter's moon, Europa, have long been interpreted as extensional structures due to brittle fracturing of ice and intrusion of mobile materials from the interior of the satellite. Based on detailed mapping and possibly analogous structures present on Earth, we propose that the kinematics and failure mechanisms of these structures are variable and more complex than previously thought. A dense network of structures of multiple generations, forming the background on the surface of the planet, is here interpreted as localized zones of volumetric strain, likely compaction and/or dilation bands. The next class of linear failure structures is shear bands with significant offset of pre-existing markers. A few additional phases of less pervasive but more prominent volumetric deformation bands overprint the shear zones and background network. The mode of younger features can be characterized as sharp, dilational, brittle fracturing and subsequent shearing, thereby producing comminution and fragmentation in various sizes, leading to a series of younger faults with detectable lateral, as well as vertical, offset. This rich variability in the nature of the distribution, localization, kinematics, and formation mechanisms, if true, suggests that the conditions prevailing within the crust of Europa must have changed dramatically over time. The implication of this conclusion is that structures interpreted to be compaction/dilation bands and shear bands on Europa are composed of deformed materials similar to the surrounding ice, whereas only the younger faults, developed by brittle fracturing and fragmentation, may be conduits for mobile substrate to reach the surface and thus offer the highest potential for recovering evidence for life in the satellite.     

The effect of spatially varying earthquake ground motions on the stochastic response of bridges isolated with friction pendulum systems

In this paper, a comprehensive investigation of the effect of spatially varying earthquake ground motions on the stochastic response of bridges isolated with friction pendulum systems is performed. The spatially varying earthquake ground motions are considered with incoherence, wave-passage and site-response effects. The importance of the site-response effect, which arises from the difference in the local soil conditions at different support points of the isolated bridge, is investigated particularly. Mean of maximum and variance response values obtained from the spatially varying earthquake ground motions are compared with those of the specialised cases of the ground motion model. It is shown that site-response component of the spatially varying earthquake ground motion model has important effects on the stochastic response of the isolated bridges. Therefore, to be more realistic in calculating the isolated bridge responses, the spatially varying earthquake ground motions should be incorporated in the analysis.     

First-level liquefaction hazard mapping of Laoag City,Northern Philippines

During the 1990 Luzon earthquake (M_s 7.8), the central part of Luzon Island, Philippines suffered much from liquefaction-related processes. Examination of inventories shows that the affected areas lie on certain geological environments that are characteristically vulnerable to liquefaction. Based on this local experience and the findings of earlier workers correlating geological setting with liquefaction susceptibility, a first-level map of liquefaction hazard for Laoag City, Northern Philippines, was produced. Distinct micro-geomorphological units were identified within the mainly fluvio-deltaic setting of the study area. The liquefaction susceptibility of each unit was then ranked as high, moderate, low or non-liquefiable, taking also the geomorphological evolution of the area into account. The geomorphological model of the fluvio-deltaic basin was tested against the results of the georesistivity survey carried out in this study. Moreover, compatibility of the liquefaction susceptibility map with historical liquefaction records supported the validity of the proposed ranking. The study showed that microzonation based on geomorphological criteria is indeed very useful in less-developed countries like the Philippines, where funds for a more rigorous determination of liquefaction potential are limited and not always available.     

Regional Geothermal Characterisation of East Anatolia from Aeromagnetic,Heat Flow and Gravity Data

East Anatolia is a region of high topography made up of a 2-km high plateau and Neogene and Quaternary volcanics overlying the subduction-accretion complex formed by the process of collision. The aeromagnetic and gravity data surveyed by the Mineral Research and Exploration (MTA) of Turkey have been used to interpret qualitatively the characteristics of the near-surface geology of the region. The residual aeromagnetic data were low-pass filtered and analyzed to produce the estimates of magnetic bottom using the centroid method and by forward modelling of spectra to evaluate the uncertainties in such estimates. The magnetic bottom estimates can be indicative of temperatures in the crust because magnetic minerals lose their spontaneous magnetization at the Curie temperature of the dominant magnetic minerals in the rocks and, thus, also are called Curie point depths (CPDs). The Curie point depths over the region of Eastern Anatolia vary from 12.9 to 22.6 km. Depths computed from forward modelling of spectra with 200–600 km window sizes suggest that the bottom depths from East Anatolia from the magnetic data may have errors exceeding 5 km; however, most of the obtained depths appear to lie in the above range and indicate that the lower crust is either demagnetized or non-magnetic. In the interpretation of the magnetic map, we also used reduction-to-pole (RTP) and amplitude of total gradient of high-pass filtered anomalies, which reduced dipolar orientation effects of induced aeromagnetic anomalies. However, the features of the RTP and the total gradient of the high-pass filtered aeromagnetic anomalies are not highly correlated to the hot spring water locations. On the other hand, many high-amplitude features seen on the total gradient map can be correlated with the ophiolitic rocks observed on the surface. This interpretation is supported by Bouguer gravity data. In this paper, we recommend that the sources of the widespread thermal activity seen in East Anatolia must be investigated individually by means of detailed mapping and modelling of high resolution geophysical data to assess further the geothermal potential of the region.     

Thermal shock weakening of granite rock under dynamic loading: 3D numerical modeling based on embedded discontinuity finite elements

This paper presents a numerical study of thermal shock weakening of granite rock under dynamic loading. A fully 3D numerical scheme based on a combined continuum viscodamage-embedded discontinuity model and an explicit scheme to solve the underlying thermomechanical problem was developed and validated through numerical examples. First, the dynamic Brazilian disc test is simulated on intact numerical rock. Then, thermal shock-induced cracking due to a moving external heat flux boundary condition, mimicking experiments based on plasma jet treatment, is numerically predicted. Finally, numerical Brazilian disc test is conducted on the thermal shocked numerical samples. The predicted and experimental weakening effects are in good agreement demonstrating that the present modeling approach has good predictive capabilities. The practical significance of the results is that heat shock pretreatment can substantially enhance rock gravel and rubble crushing.     

Analyzing the occurrence of floods and droughts in connection with climate change in Punjab province,Pakistan

Natural Hazards - Frequency and intensity of extreme weather events are immensely changing throughout the world. This study aims to give insight into the changing climatic patterns leading to...     

Determination of Polycyclic Aromatic Hydrocarbons in Soil by Miniaturized Ultrasonic Extraction and Gas Chromatography‐Mass Selective Detection

A miniaturized ultrasonic extraction procedure was developed for the determination of polycyclic aromatic hydrocarbons (PAHs) in soil by gas chromatography‐mass spectrometry. After determination of the most suitable extraction solvent with 5 min sonication time, several other parameters (sample amount, solvent volume and number of extraction times) were optimized using a 2³ factorial experimental design. Recoveries of PAHs from spiked soil samples were over 90% for three different fortification levels between 50 and 300 μg/kg, and relative standard deviations of the recoveries were in the range of < 1–15%. The limits of detection ranged from 0.002 to 1.87 μg/kg. The performance of the developed procedure was also compared with other traditional Soxhlet, shake flask and large scale ultrasonic extraction procedures on real soil samples, and extraction methods showed comparable efficiencies. The proposed procedure required small volumes of solvent and sample. It was practicable, rapid and easy to use for analysis of PAHs in soils.     

Segmentation along Strike-Slip Faults Revisited

Fault segmentation and fault steps and their evolution are relevant to the dynamics and size of earthquake ruptures, the distribution of fault damage zones and the capacity of fault seal. Furthermore, segment interactions and coalescence are the fundamental processes for fault growth. To contribute to this end, we investigated the architecture of strike-slip faults by combining field observations in the Valley of Fire State Park, Nevada, and the published data sets. First, we studied the trace complexity for 49 faults with offsets ranging from 12 m to 460 km. We established that the number of fault steps (hence fault segments) per unit length is correlated to the maximum fault offset by a negative power law. The faults have longer segments and fewer steps when their offsets increase, indicating the progressive growth, smoothening and simplification of the fault traces as a function of the offset, as proposed by previous investigators. Second, we studied the dimensions of the segments and steps composing ~20 of the previous fault systems. The mean segment length, mean step length and mean step width are all correlated to the maximum fault offset by positive power laws over four orders of magnitude of the offset. In addition, the segment length distributions of four of the faults with offsets ranging from 80 m to 100 km are all lognormal, with most of the segment lengths falling in the range of one to five times the maximum offset of the faults. Finally, the fault steps have an approximately constant length-to-width ratio indicating that, regardless of their environment, strike-slip faults have a remarkable self-similar architecture probably due to the mechanical processes responsible for fault growth. Our data sets can be used as tools to better predict the geometrical attributes of strike-slip fault systems with important consequences for earthquake ruptures, the distribution and properties of fault damage zones, and fault sealing potential.