Stratigraphic development of an Upper Jurassic deep marine syn‐rift succession,Inner Moray Firth Basin,Scotland

The stratigraphic development of an Upper Jurassic syn‐rift succession exposed at outcrop in the Inner Moray Firth Basin has been investigated using high‐resolution biostratigraphy and sedimentology. A continuous 970 m thick section, exposed in the hangingwall of the Helmsdale Fault was logged in detail. The succession spans 8 Ma and contains eight lithofacies types, which indicate deposition in a deep marine setting. Boulder beds contain large, angular clasts, with bed thicknesses typically >2 m and poor sorting suggesting deposition by debris flows. An inverse clast stratigraphy is observed; the oldest boulder beds contain sandstone clasts of Upper Old Red Sandstone (ORS) with younger debris flows containing clasts of Middle ORS calcareous siltstone. A marked change from siliciclastic to carbonate dominated sedimentation occurred during the Early Tithonian, interpreted primarily as a result of change in lithologies in the footwall catchment from sandstone to calcareous siltstone, which reduced supply of siliciclastic sediment. Secondary factors are identified as increased aridity in the Early Tithonian, which reduced sand supply from the hinterland and a third‐order Early Tithonian eustatic sea‐level rise, which trapped coarser clastic sediment within the hinterland. Biostratigraphy allows calculation of variations in sedimentation rates with recognition of: (1) an early rift phase characterised by sandy turbidite deposition, when sedimentation rates averaged 0.08 m/ky, (2) a rift climax phase from the Early Kimmeridgian where sedimentation rates increased steadily to a maximum of 0.64 m/ky in the Early Tithonian, with strata dominated by boulder scale clast‐supported debris flows and (3) a late stage of rifting from the mid Tithonian, where sedimentation rates decreased to 0.07 m/ky. Overall sedimentation rates are comparable to those of other deep marine rift basins. Unroofing a resistant lithology on the footwall of a rift has important implications for siliciclastic sediment supply in rift basins.     

Spatial video and GIS

GIS elemental unit representations of spatial data are often defined in terms of points, lines and areas. However, another type of spatial data that is becoming frequently captured, but as yet is largely ignored in GIS, is that of video. While digital video recording is a commonly encountered medium in modern society and encompasses many forms, from simple personal camcorders through to sophisticated survey and surveillance systems, its geographical representation in a GIS has not been fully examined or realised. In the majority of cases the video footage is usually captured while the device and/or the objects being viewed are in motion. What is of particular interest is when video streams can be, or have been, associated with spatial data such as location and orientation to create geographically referenced videographic data, which, for simplicity, will be defined as spatial video. Fundamentally, the nature of video is to record space, so when spatial properties can be accurately acquired and associated with this footage, an important geographical element can be considered for integration and analysis within a GIS.

Existing spatial video systems, both commercial and research, are predominantly used in survey or LBS roles and are usually bespoke and application specific. These systems do not model spatial video to any recognised standards that is generalised to be both data and platform independent. They do not support GIS integration and/or analysis from a purely spatial content perspective. A video-image/remote-sensing centric approach prevails where usage options range from simple visualisation interfaces to interactive computer vision systems. What has been largely overlooked is a spatial approach where the inherent geographical extent recorded in each video frame can be modelled and used in a geo-spatial analysis context. While this modelling approach has not been fully realised, it does exist in a GIS form based on Open Geospatial Consortium standards, where the spatial context of video is defined in a structure called a ViewCone. However, a ViewCone only defines a 2D model of the geographical extent of each frame and is restricted to a three-or-five sided polygon representation.

Thus, this article examines the potential of modelling spatial video through the use of elemental data types within GIS; gives some examples of using this approach; describes some problems in using spatial video within GIS; and then demonstrates how these problems are being solved. This is done in three stages: Firstly, a detailed overview of spatial video in its current GIS role is provided – this is achieved through a complete introduction to the distinct elements of spatial video followed by a review of its use in both commercial and academic application areas. Secondly, a brief theoretical overview of an alternative GIS-constrained ViewCone data structure is given that defines a more flexible spatial video model for both 2D and 3D GIS analysis and visualisation. Thirdly, a selective sample of results is presented based on an implementation of this approach being applied to a constrained spatial video data source in a specific study area.     

A complex asteroseismic study of the hybrid B-type pulsator ν Eridani

We present results of comprehensive seismic modelling of the B-type main-sequence pulsator ν Eridani, which consists in parallel fitting of the pulsational frequencies and corresponding values of the complex, nonadiabatic parameter f, defined by the bolometric flux perturbation. This kind of studies, which we call complex asteroseismology, provides a unique test of stellar opacities. Our results indicate a preference for the OPAL data.     

A study of fecal coliform sources at a coastal site using colored dissolved organic matter (CDOM) as a water source tracer

Optical properties of colored dissolved organic matter (CDOM) were measured as a tracer of polluted waters in a Southern California surf-zone with consistently high levels of fecal indicator bacteria. Salinity, temperature, fecal coliform, absorbance (200-700nm) and fluorescence (lambda(excitation)=350nm; lambda(emission)=360-650nm) were measured in the creek and surf-zone during a dry and rain event. Fluorescence to absorption ratios for CDOM were used to distinguish water masses, with two distinct CDOM end-members identified as creek (flu/abs=8.7+/-0.8x10(4)) and coastal (flu/abs=2.2+/-0.3x10(4)). Waters containing the same CDOM end-member had highly variable bacterial levels during the dry event, suggesting intermittent sources of bacteria added to a uniform water source, consistent with marine birds. During the rain event, increased levels of the creek end-member and bacteria indicated a second bacteria source from runoff.     

The evolution of coastal barrier systems: a case study of the Middle-Late Pleistocene Wilderness barriers,South Africa

Barrier systems contain lengthy, but complex, records of long-term environmental fluctuations. The Wilderness embayment, South Africa, contains a system of shore-parallel barriers reaching up to 200 m above modern sea level. This study reports the results of chronological, topographical (both on- and off-shore), sedimentological and micromorphological analyses within the Wilderness embayment. Sixty-one new luminescence ages from sixteen sites in unconsolidated dunes and three separate barriers are presented which, when combined with previously published luminescence ages from the area, provide a high-resolution chronological framework for the emplacement and evolution of the barrier system. The preserved barriers have been constructed within at least the last two glacial–interglacial cycles with notable phases between 241–221 ka, 159–143 ka, 130–120 ka, 92–87 ka and post 6 ka. Multiple phases of barrier construction occurred during sea-level highstands, with sediment deposition on each individual barrier occurring over at least two interglacials. Holocene evolution of the system sheds light on earlier events, with dune preservation occurring only during early regression from the Mid-Holocene highstand. Tectonic stability at Wilderness allowed glacio-eustatically formed shorelines to occupy similar positions on multiple occasions. This, in conjunction with a relatively humid climate and a well-vegetated landscape, enabled deflated sediment from beaches to form dunes which stacked upon each other to form an extensive and complex vertical accretionary sequence. Repeated erosion and recycling of pre-existing barriers as well as barrier construction on what is currently the off-shore platform during still-stands in sea-level regressional cycles, when sea levels dropped below ca ?50 m from the present day, has added to the complexity of the preserved terrestrial barrier record. The Wilderness barrier system contrasts with barriers developed elsewhere in the world where higher rates of crustal uplift have allowed preservation of a more complete and more widely spaced palaeorecord. This research also shows the utility of integrating off-shore topography as revealed by bathymetry, with terrestrial topographic data for the better understanding of the evolution of palaeo-coastlines and the preserved dune record found on present-day coastal plains. Local variation in the topography of the continental shelf at Wilderness has generated spatial and temporal complexity within the sedimentary records of individual barriers as well as having a significant influence on preservation.     

Geology,stratigraphy and palaeoenvironmental evolution of the Stephanorhinus kirchbergensis-bearing Quaternary palaeolake(s) of Gorzów Wielkopolski (NW Poland,Central Europe)

The sedimentary succession exposed in the Gorzów Wielkopolski area includes Eemian Interglacial (MIS 5e) or Early Weichselian (MIS 5d–e) deposits. The sedimentary sequence has been the object of intense interdisciplinary study, which has resulted in the identification of at least two palaeolake horizons. Both yielded fossil remains of large mammals, alongside pollen and plant macrofossils. All these proxies have been used to reconstruct the environmental conditions prevailing at the time of deposition, as well as to define the geological context and the biochronological position of the fauna. Optically stimulated luminescence dating of the glaciofluvial layers of the GS3 succession to 123.6 ± 10.1 (below the lower palaeolake) and 72.0 ± 5.2 ka (above the upper palaeolake) indicate that the site formed during the Middle–Late Pleistocene (MIS 6 – MIS 5). Radiocarbon-dating of the lacustrine organic matter revealed a tight cluster of Middle Pleniglacial Period (MIS 3) ages in the range of ~41–32 ka cal bp (Hengelo – Denekamp Interstadials). Holocene organic layers have also been found, with ¹⁴C ages within a range of 4330–4280 cal bp (Neolithic). Pollen and plant macrofossil records, together with sedimentological and geochemical data, confirm the dating to the Eemian Interglacial.     

Blueschist facies metamorphism in Nordenskiöld Land of west‐central Svalbard

Recent fieldwork in Nordenskiöld Land, Svalbard's Southwestern Basement Province, has established the presence of high‐pressure (HP) lithologies. They are strongly retrogressed blueschists consisting mainly of garnet and Ca‐amphibole with remnants of ferroglaucophane and phengite. The pressure–temperature (P–T) conditions were estimated using phase equilibrium modelling in the NCKFMMnASHTO system. P–T estimates based on the garnet, phengite and ferroglaucophane compositional isopleths and modelled paragenetic assemblage indicate peak metamorphism at 470–490 °C and 14–18 kbar. These data fall close to the 7–8 °C km^?1 geotherm, which is similar to that from Motalafjella, the only previously known occurrence of blueschists in Svalbard's Caledonides. The newly discovered blueschists could have formed during the early stage of the Caledonian Orogeny and may represent a vestige of missing marginal basins of the western Iapetus developed at the onset of subduction. The likely counterpart to Svalbard's blueschists is the ophiolitic sequence in the Pearya Terrane of northern Ellesmere Island.     

Simulating low flows over a heterogeneous landscape in southeastern Poland

This paper presents a scheme describing low flow formation processes in areas with different environmental conditions, including the impact of the selection and explanatory power of predictors for a probabilistic model based on the Logit model. The research was carried out using 29 daily streamflow gauges located in the Lublin region of southeastern Poland for the hydrological period 1976–2018. Analysis resulted in two distinct low flow schemes. In the lowland rivers, low flows occur during the warm season and are related to evaporation exceeding precipitation. In the upland rivers, hydrogeological factors related to water levels in the local Cretaceous aquifers determine the occurrence of low flows. This differentiation affects the quality of the predictive models. For lowland rivers, models based on the climatic water balance with a monthly shift have a better fit, while these models used for upland rivers are characterized by an approximately 10% decrease in accuracy. For upland rivers, the combined C_tH_t models without shifts produce the best model fit. The generalized precision of the Logit models is around 80%–90%.     

Long-term research catchments to investigate shrub encroachment in the Sonoran and Chihuahuan deserts: Santa Rita and Jornada experimental ranges

Woody plant encroachment is a global phenomenon whereby shrubs or trees replace grasses. The hydrological consequences of this ecological shift are of broad interest in ecohydrology, yet little is known of how plant and intercanopy patch dynamics, distributions, and connectivity influence catchment-scale responses. To address this gap, we established research catchments in the Sonoran and Chihuahuan Deserts (near Green Valley, Arizona and near Las Cruces, New Mexico, respectively) that represent shrub encroachment in contrasting arid climates. Our main goals in the coordinated observations were to: (a) independently measure the components of the catchment water balance, (b) deploy sensors to quantify the spatial patterns of ecohydrological processes, (c) use novel methods for characterizing catchment properties, and (d) assess shrub encroachment impacts on ecohydrological processes through modelling studies. Datasets on meteorological variables; energy, radiation, and CO₂ fluxes; evapotranspiration; soil moisture and temperature; and runoff at various scales now extend to nearly 10 years of observations at each site, including both wet and dry periods. Here, we provide a brief overview of data collection efforts and offer suggestions for how the coordinated datasets can be exploited for ecohydrological inferences and modelling studies. Given the representative nature of the catchments, the available databases can be used to generalize findings to other catchments in desert landscapes.