Head—on collision of nonlinear dust—acoustic solitary waves in dusty plasmas with dust of opposite polarities

The propagation and the head—on collision of nonlinear dust—acoustic solitary waves (DASWs) in dusty plasmas consisting of electrons, ions and negative as well as positive dust particles are investigated. Applying an extended Poincaré-Lighthill-Kuo (PLK) method, Kortwege-de Vries equations and analytical phase shifts after the head-on collision of two DASWs in dusty plasmas are obtained. Analytically and numerically, the relevance of the phase shifts and trajectories to the positive-to-negative dust number density ratio, the ratio of the ion number density to negative dust number density, negative-to-positive dust particle mass ratio, and the ion-to-electron temperature ratio effects is explicitly demonstrated. Moreover, the current findings are applied to different regions of space, viz. cometary tails, mesosphere, Jupiter’s magnetosphere.     

Coupling of remote sensing data and environmental-related parameters for dengue transmission risk assessment in Subang Jaya,Malaysia

In Malaysia, the endemic level of dengue fever (DF) has already changed morbidity indicators, and the magnitude of these incidences in the last few years has surpassed the incidences of all other diseases of compulsory notification. The reasons for the dramatic emergence of DF are complex and not well understood. There are many factors that contribute to the epidemiological conditions that favour viral transmission by the main mosquito vector. This study, therefore, is filling this gap by analysing the impact of dengue incidence at a local (Subang Jaya) scale using environmental factors. Meteorological data and land-use pattern were consolidated using geographic information system (GIS) and its components as an analytical tool. We have shown that weather variables (relative humidity, temperature and precipitation) have significant correlation with DF incidence with seasonal variation. Besides land-use pattern, DF incidence shows the higher distribution in the residential area, followed by commercial and industrial area. This is due to the higher population density in residential area as well as favourable places for the breeding of dengue-carrying Aedes mosquitos created by humans in the residential area, especially one-storey houses. The analysis on the trends of DF incidence towards various housing types indicate that most of the victims’ houses fall into interconnection houses and mixed houses types compared to the independent houses area. The outcome driven from this analysis suggested that each character of the environmental factors has their own risk towards dengue incidence. In line with that, it is possible to develop a dynamic model of DF transmission using the knowledge produced by this comprehensive time series data and the results provided by the different analyses.     

Effect of Ozone and Ozone/Fenton in the Advanced Oxidation Process on Biodegradable Characteristics of Semi‐aerobic Stabilized Leachate

This study investigated the effects of O₃ and O₃/H₂O₂/Fe²⁺ in the advanced oxidation processes (AOPs) on the biodegradable and soluble characteristics of semi‐aerobic stabilized solid waste leachate. The biodegradability (BOD₅/chemical oxygen demand, COD) ratio improved from 0.034 to 0.05 and 0.1 following O₃ and O₃/H₂O₂/Fe²⁺, respectively. Fractions of biodegradable COD_(bi) (24%), non‐biodegradable COD_(ubi) (76%), soluble COD_(s) (59%), biodegradable soluble COD_(bsi) (38%), non‐biodegradable soluble COD_(ubsi) (62%), and particulate COD (PCOD) (41%) in stabilized leachate were also investigated. The fraction of COD_(bi) increased to 28 and 36% after applying O₃ and O₃/AOPs, respectively. COD_(S) increased to 59% after O₃ and to 72% after O₃/AOPs, whereas COD_(bsi) increased to 38 and 51% after O₃ and O₃/AOPs, respectively. The removal efficiency of COD_(S) was obtained at 5% after O₃ alone and improved to 51% following ozone‐based AOPs, whereas the removal efficiency of PCOD improved from 25% after O₃ to 71% after ozone‐based AOPs.     

Impacts of human activities on the sedimentological and geochemical characteristics of Mabahiss Bay, North Hurghada, Red Sea, Egypt

In Mabahiss Bay, north Hurghada City, Red Sea, Egypt, the bathymetric measurements show the irregular topography of the bottom. The bottom sediments are mainly composed of sand fractions (average 73.5%). Gravel and sand contents decrease with depth. On the other hand, silt and clay percents show indirect relation with depth. Abnormally, there are some spots found near the coast where the percent of both silt and clay increases. They also show carbonate sediments (average 90.15%) increasing toward the bay center. The narrow belt adjacent to the shore area has lower carbonate content reflecting the effect of clastic sediments input into the area. The sediments in the study area have more than one source as indicated from the results of the mechanical analysis. Wide range of grain size distributions, clay spots and low carbonate content near the shore indicate change in the nature of sedimentary environment (i.e., pollution) which may be caused by land filling accompanied with urbanization and building of touristic resorts and centers. The organic matter content in the sediments is much higher than that of the other areas in the Red sea (average 4.8%) with considerable accumulation in the inner most parts of the bay. This may be due to relative abundance of organic productivity, direct discharge of domestic waste in some spots along the coast of the study area, and/or local contamination of hydrocarbons (i.e., tar balls thrown out on shore by weak waves through the few inlets of the study area). The average concentrations of lead, nickel, copper, and cadmium are 44, 34, 51, and 3.1?ppm, respectively. The suggested origin of these metals is either organic (localized oil pollution), or using of antifouling and anticorrosive paints from fishing and tourist boats. Other metals, particularly manganese (average 77?ppm), cobalt (average 51?ppm), and zinc (average 16?ppm) as well as sodium (average 0.32%) and potassium (av. 0.10%) show a common trend of increasing concentration toward the outermost parts of the bay. Some parts along shoreline have increasing concentrations, even if these parameters having a common trend of increase towards the center of the bay. This may be either due to sewage and wastewaters discharges from many outlets of tourist centers and fishermen and cargo boats, and/or terrestrial sediments input. Direct comparison of the present levels of heavy metals in Mabahiss Bay with other published data along the Red Sea and Gulf of Suez shows that the study area has higher concentrations. Dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats (where the bay is used as harbor for many of fishermen and cargo boats), sewage, variable amounts of municipal wastewater from many outlets of tourist centers considered to be the sources of pollution within Mabahiss bay. There are many effects of pollution on Mabahiss Bay environment among which: (1) death of fishes, seaweeds, birds, marine mammals, etc., (2) damage of beaches and other recreational areas, (3) damage of marine ecosystem by eliminating or decreasing population of certain species, (4) hazard to human from ingesting contaminated food, and more.     

Origin of wehrlite cumulates in the Moho transition zone of the Neoproterozoic Ras Salatit ophiolite,Central Eastern Desert,Egypt: crustal wehrlites with typical mantle characteristics

Ultramafic cumulates, mainly crustal true wehrlites, were discovered and described in the mantle–crust transition zone (MTZ) and the extremely lower layered gabbro sequence of the Ras Salatit ophiolite, Central Eastern Desert, Egypt. They form either boudinaged lensoidal tabular bodies or interdigitated layers often concordant with the planolinear fabrics of the Ras Salatit ophiolite rocks. The contact between wehrlites and the host MTZ dunite or layered gabbro is razor sharp, lobate and/or sinuous, without chilled margins or any visible deformations. The Ras Salatit wehrlites are orthopyroxene-free and composed mainly of olivine and clinopyroxene. They are texturally equilibrated and show a characteristic poikilitic texture. Crystallization order of the Ras Salatit wehrlites is olivine/spinel followed by clinopyroxene with the absence of plagioclase. Olivine and clinopyroxene of the Ras Salatit wehrlites are compositionally uniform and conspicuously high in Mg#, mostly around 0.93 and 0.92, respectively. Moreover, the clinopyroxene shows low Ti and Al contents coupled with marked depletion in LILE. The calculated melt in equilibrium with clinopyroxene from the Ras Salatit wehrlites is largely similar to lavas from the Izu-Bonin forearc. Given the above characteristics, the Ras Salatit wehrlites were produced by crystal accumulation from a hydrous depleted basaltic/tholeiitic melt corresponding to temperatures between 1,000 and 1,100°C at the oceanic crustal pressure (~2 kbar). The involved hydrous tholeiitic melt has been probably formed by fluid-assisted partial melting of a refractory mantle source (similar to the underlying harzburgites) in a somewhat shallow sub-arc environment.     

A three-step strategy for generalization of 3D building models based on CityGML specifications

3D building models of the world exhibit multi-scale properties. Different level-of-details (LoDs) are important for different applications. Therefore, generation of multi-scale representation of 3D building models to fulfill the demands of these applications is a generalization problem. In order to generalize 3D buildings, different pieces of information need to be preserved or removed to restrict the amount of data represented on a certain LoD. In this work, a three-step strategy based on simplification, aggregation and reconstruction of generalized buildings represented in City Geography Markup Language (CityGML) is proposed. The minimum length of edges (threshold value) for removal of amount of data is restricted to generalization specifications of CityGML characterized by differing accuracies and minimal dimensions of objects for each LoD. The main part of this paper is simplification of ground plans. For this purpose, a new approach is proposed to restrict number of edges, curves, and corners of ground plan of 3D building model on a certain LoD. Algorithms for simplification with the aim to derive LoD1 from exterior shells of buildings at LoD3 are implemented and tested on a number of buildings of Putrajaya city. The experiments showed that length of edge as threshold value is directly proportional to the size of generalized models.     

Mapping spectral tropicality in The Maid and Return to Pontianak

Contemporary, postcolonial Singapore has tamed, managed, and essentially disavowed its tropicality, aptly captured symbolically as the 'air-conditioned nation'. This essay traces how two recent Singapore horror films, The Maid (2005) and Return to Pontianak (2001), evoke the 'return of the repressed' as a form of haunting that I call 'spectral tropicality'. The films image and imagine this spectral return through unruly bodies (citizen subjects, female domestic workers, ghosts and vampire-ghosts) and uncanny landscapes (the jungle and city). In particular, the films and this analysis examine two sociocultural spectres lurking beneath Singapore as a tropical urban city-nation: the female domestic worker ( The Maid ) and ethnoracial folk beliefs ( The Maid and Return to Pontianak ). The Maid features the Hungry Ghosts Festival in the Chinese religious calendar, ghost marriages and an engagement with yin and yang energies, while Return to Pontianak deals with Malay folk beliefs of semangat ('life force'), and the pontianak, a female vampire-ghost. The Maid attempts to integrate Chinese folk beliefs into contemporary Singapore's cityscape, particularly the architecturally conserved Chinatown shophouses, while Return to Pontianak displaces Malay folk beliefs onto the tropical forest, which is mapped as a threatening other(ed) space and serves as Singapore's tropical doppelganger. Both films suggest that these folk beliefs have an unruly presence within the state's seemingly harmonious and meritocratic ethnoracial ideologies.     

Bedload transport of small rivers in Malaysia

Numerous time-consuming equations, based on the relationship between the reliability and representativeness of the data utilized in defining variables and constants, require complex parameters to estimate bedload transport. In this study the easily accessible data including flow discharge, water depth, water surface slope, and surface grain diameter （ds0） from small rivers in Malaysia were used to estimate bedload transport. Genetic programming （GP） and artificial neural network （ANN） models are applied as complementary tools to estimate bed load transport based on a balance between simplicity and accuracy in small rivers. The developed models demonstrate higher performance with an overall accuracy of 97% and 93% for ANN and GP, respectively compared with other traditional methods and empirical equations.     

Adaptive state estimation of groundwater contaminant boundary input flux in a 2-dimensional aquifer

In many circumstances involving heat and mass transfer issues,it is considered impractical to measure the input flux and the resulting state distribution in the domain.Therefore,the need to develop techniques to provide solutions for such problems and estimate the inverse mass flux becomes imperative.Adaptive state estimator(ASE)is increasingly becoming a popular inverse estimation technique which resolves inverse problems by incorporating the semi-Markovian concept into a Bayesian estimation technique,thereby developing an inverse input and state estimator consisting of a bank of parallel adaptively weighted Kalman filters.The ASE is particularly designed for a system that encompasses independent unknowns and/or random switching of input and measurement biases.The present study describes the scheme to estimate the groundwater input contaminant flux and its transient distribution in a conjectural two-dimensional aquifer by means of ASE,which in particular is because of its unique ability to efficiently handle the process noise giving an estimation of keeping the relative error range within 10%in 2-dimensional problems.Numerical simulation results show that the proposed estimator presents decent estimation performance for both smoothly and abruptly varying input flux scenarios.Results also show that ASE enjoys a better estimation performance than its competitor,Recursive Least Square Estimator(RLSE)due to its larger error tolerance in greater process noise regimes.ASE's inherent deficiency of being slower than the RLSE,resulting from the complexity of algorithm,was also noticed.The chosen input scenarios are tested to calculate the effect of input area and both estimators show improved results with an increase in input flux area especially as sensors are moved closer to the assumed input location.