Intraspecific morphometric diversity of barramundi (Lates calcariferBloch, 1790) in the waters of southern Bangladesh

A total of 160 barramundi's(Lates calcarifer Bloch,1790)sampled from four rivers(Tentulia,Balaswar,Bakkhali,and Andarmanik)along the southern coastal region of Bangladesh were investigated in terms of morphometric characters to reveal the intraspecific variation.Twenty-five morphometric measurements were extracted using the conventional method and subjected to multivariate analyses(i.e.,principal component analysis(PCA),discriminate function analysis(DFA),cluster analysis(CA))to distinguish individuals from different rivers.The result demonstrated that twenty-two out of 2 5 measurements was statistically significant(Univariate ANOVA)among all four populations.PCA analy sis of morphometric characters resulted in two principal components,PC I and PCII which accounted for 79.25%and 4.28%of the total data variance.PC I-PC Ⅱ plot explained 83.5 3%of total variance differentiated the population of L.calcarifer into two groups.Discriminate analysis correctly classified about 88.1%of the examined fish into the four areas.The UPGMA dendrogram showed that Bakkhali populations were the most morphologically different populations in comparison to other populations,while Andarmanik and Balaswar populations were very close to each other.The strong morphometric variation between Bakkhali and Tentulia,Andarmanik and Balaswar was observed in the present study,suggested the evidence of the separate stock population of barramundi in these locations,which might require distinct stock management strategies for resource sustainability in the waters of southern Bangladesh.However,if these findings are supported by further molecular markers and geometric morphometry,this would be a strong indication of different stocks of this population in the four rivers of southern Bangladesh.     

Identification of “small” dust impacts in the Ulysses dust detector data

Since October 1990, 3 weeks after the launch of the Ulysses spacecraft, the dust detector onboard recorded impacts of cosmic dust particles. Besides dust impacts, the detector recorded noise from a variety of sources. So far, a very rigid scheme had been applied to eliminate noise from impact data. The data labeled “big” dust impacts previously led to the identification of interstellar dust and of dust streams from Jupiter. The analysis presented here is concerned with data of signals of small amplitudes which are strongly contaminated by noise. Impacts identified in this data set are called “small” impacts. It is shown that dust impacts can be clearly distinguished from noise for most of the events due to the multi-coincidence characteristics of the instrument. 516 “small” impacts have been identified. For an additional 119 events, strong arguments can be given that they are probably small dust impacts. Thereby, the total number of dust impacts increases from 333 to 968 in the time period from 28 October 1990 to 31 December 1992. This increase permits a better statistical analysis, especially of the Jupiter dust streams which consist mostly of small and fast particles. Additional dust streams have been identified between the already known streams before and after Jupiter flyby. The dependence of the deflection from the Jupiter direction, the stream intensity and width on Jupiter distance support the assertion that they have been emitted from the Jovian system. The masses of the 635 “small” dust particles range from 6 × 10⁻¹⁷ to 3 × 10⁻¹⁰ g with a mean value of 1 × 10⁻¹² g, which compares to a range from 1 × 10⁻¹⁶ to 4 × 10⁻⁹ g with a mean value of 2 × 10⁻¹¹ g for the previously identified 333 “big” dust particles.     

Simulation of vortex-induced vibrations of a cylinder using ANSYS CFX

In this paper, vortex-induced vibrations of a cylinder are simulated by use of ANSYS CFX simulation code. The cylinder is treated as a rigid body and transverse displacements are obtained by use of a one degree of freedom spring damper system. 2-D as well as 3-D analysis is performed using air as the fluid. Reynolds number is varied from 40 to 16000 approx., covering the laminar and turbulent regimes of flow. The experimental results of （Khalak and Williamson, 1997） and other researchers are used for validation purposes. The results obtained are comparable.     

Geochemistry and fluid inclusions study of highly fractionated garnet-bearing granite of Gabal Abu Diab, central Eastern Desert of Egypt

The Neoproterozoic granite of Gabal Abu Diab, central Eastern Desert of Egypt, comprises mainly garnet-bearing granite and alkali feldspar granite intruded into calc-alkaline granodiorite–tonalite and metagabbro–diorite complexes. The garnet-bearing granite is composed mainly of plagioclase, K-feldspar, quartz, garnet and primary muscovite ± biotite. The presence of garnet and primary muscovite of Abu-Diab granite suggests its highly fractionated character. Geochemically, the garnet-bearing granite is highly fractionated as indicated from the high contents of SiO₂ (74.85–77.5%), alkalis (8.27 to 9.2%, Na₂O+K₂O) and the trace elements association: Ga, Zn, Zr, Nb and Y. This granite is depleted in CaO, MgO, P₂O₅, Sr and Ba. The alumina saturation (Shand Index, molar ratio A/CNK) of 1.0 to 1.1 indicates the weak peraluminous nature of this garnet-bearing granite. The geochemical characteristics of the Abu Diab garnet-bearing granite are consistent with either the average I-type or A-type granite and also suggest post-orogenic or anorogenic setting. A fluid inclusions study reveals the presence of three fluid generations trapped into the studied granite. The earlier is a complex CO₂–H₂O fluid trapped in primary fluid inclusions with CO₂ contents >?60 vol.%. These inclusions were probably trapped at minimum temperature >?400°C and minimum pressure >?2 kb. The second is immiscible water–CO₂ fluid trapped in secondary and/or pseudo-secondary inclusions. The trapping conditions were estimated at temperature between 400°C and 170°C and pressure between 900 and 2000 bar. The latest fluid is low-salinity aqueous fluid trapped in secondary two-phase and mono-phase inclusions. The trapping conditions were estimated at temperature between 90°C and 160°C and pressure <?900 bar. The origin of the early fluid generation is magmatic fluid while the second and third fluids are of hydrothermal and meteoric origin, respectively.     

Stability criterion for the non-Maxwellian permeating plasma

Employing Vlasov-Poisson model for nonthermal distributed permeating plasma consisting of electron-positron-ion plasma of our earth’s magnetosphere and the solar wind plasma with some fixed streaming velocity, can drive ion-acoustic waves unstable. The growth rates are computed with respect to the variation in spectral index of the kappa or generalized Lorentzian distribution and streaming velocity of the solar wind. It is found that the growth rate increases with the decrease of spectral index and increases with the streaming velocity of the solar wind. The numerical results are also presented by choosing some suitable parameters.     

Amelioration of calcareous sandy soil productivity via incorporation between biochar and some organic manures

Most arid and semi-arid soils, especially calcareous sandy soils, are widely distributed in the Middle East region; the deficiency in their content of many nutrients particularly phosphorus and organic matter limits crops production. This study aimed to assess the effects of adding biochar (B) with farmyard manure (FYM) and poultry manure (PM) on some soil properties, phosphorus (P) availability, and barley growth in calcareous sandy soil. The pot experiment includes the following treatments: Control, B, B?+?FYM (1:1), B?+?PM (1:1), B?+?FYM (2:1), B?+?PM (2:1), FYM?+?B (2:1), and PM?+?B (2:1). Biochar combined with FYM and PM enhanced the water holding capacity (WHC) and soil organic matter (SOM) content in calcareous sandy soil. Phosphorus availability was increased significantly by applying biochar mixed with farmyard manure and poultry manure at all treatments. Green biomass of barley improved because of adding biochar alone, poultry manure alone, and biochar co-applied with poultry manure at all mixing ratios. Biochar application caused significant increases in phosphorus use efficiency (PUE) by barley plants compared to all other treatments, except for the control. We recommend adding biochar either individually or mixed with poultry manure to improve the productivity of calcareous sandy soil.     

Speciation and geospatial analysis of disinfection byproducts in urban drinking water

Trihalomethanes (THMs) are the most abundant disinfection byproducts (DBPs) of the chlorination disinfection. THMs speciation and their geospatial distribution were examined in 58 locations throughout the water distribution network of Karachi city. THMs (CHCl₃, CHCl₂Br, CHClBr₂ and CHBr₃) and physico-chemical parameters (pH, TDS, DO, Residual chlorine, temperature and TOC) were determined. CHCl₃ was the major THM found in all water samples of 58 locations, which accounted for 91.69 % of the total THMS followed by CHCl₂Br (5.69 %), CHClBr₂ (1.78 %) and CHBr₃ (0.85 %). Total THMs level exceed the maximum contamination level of WHO and USEPA at some locations. Varying nature of correlation from high to low was found within THMs and among the physico-chemical parameters. GIS linked geospatial analysis revealed the association of THMs level with demographical and geological based variations from east to west of Karachi city. Continuous monitoring program and legislation for the contaminant levels were suggested to avoid adverse public health impact of THMs in drinking water supplies.     

Environmental texture and geochemistry of the sediments of a subtropical mangrove ecosystem and surrounding areas,Red Sea Coast,Egypt

The textural and geochemical aspects of the sediments of subtropical mangrove ecosystem and surrounding areas have been studied and discussed. Forty sediment samples were collected from different areas of mangrove environment and surrounding areas along the Egyptian Red Sea coast. The sediments of each study areas are characterized by the abundance of sand with minor amounts of mud and gravel. The mean size of the sediments ranged from medium grained to fine grained at the study areas. Cluster analysis showed that the distribution of gravel, sand, and mud fractions is related to bottom facies and type of sediment source. Generally, sand fraction is the main category among the three constituents. Carbonate content recorded minor values in the study areas. The CaCo₃ content of the sediments ranged from 4.7 % at Hamata area to 64.9 % at Erier area. Terrigenous and biogenic components are the factor controlling of the carbonate content of studies sediments. The organic carbon content ranged from 1.10 at Hamata area to 3.1 % at Sharm el-Qibli and Erier areas, which is controlled by particle size of the sediments. Phosphorus content in the different studied localities is related to the sources of phosphorus to the area. Our observations provide evidence that there are no significant differences in environmental texture and geochemistry of the sediments of subtropical mangrove ecosystem and surrounding areas of the Egyptian Red Sea coast.     

Geomechanical evaluation of Pliocene natural aggregates as pavement materials

Asphaltic roads and constructions in Egypt annually consume a huge amount of aggregates. The physical and geomechanical properties of these aggregates have controlled their performance in which they are used. All road pavements require the efficient use of locally available materials if economically constructed roads are to be built. More than 650 million m³ of fine and coarse aggregates are herein selected to be the tonnage of the present study. The studied Pliocene aggregates have smoothed grading curves and neither a deficiency nor excess of any one particle size, generally produce good mixtures with fewer voids between particles. The litho-particles of coarse aggregates are composed mainly of granites, gneisses, granodiorite, gabbro, and quartz particles. The sand equivalent value of fine aggregates varies from 95 to 97 %. The specific gravity values of the studied aggregates vary from 2.72 to 2.74 gm/cm³ for coarse aggregate and range from 2.51 to 2.54 gm/cm³ for fine aggregate. The Los Angles abrasion value varies from 19 to 24 %. Both coarse and fine aggregates meet the international standards which are suitable for usage as subbase and surface course aggregates, respectively.     

Evaluation of Fragments from Disc Cutting of Dry and Saturated Sandstone

As the use of mechanical excavation in tunneling and mining activities expands, so has the use of disc cutters in various ground conditions. The impact of moisture content on rock behavior and rock excavation by disc cutters is examined in this study. This was done through a series of full-scale cutting tests using a 292 mm (11.5 in.) disc cutter in a moderate strength sandstone. The muck from the cutting tests was used to determine coarseness index (CI) and absolute size constant (x′). x′ was calculated using Rosin–Rammler distribution (or Weibull) curve, a statistical technique to look at the fragmented rock products. This approach is very popular among the mineral-processing professionals for the evaluation of the particle sizes of the comminution products. x′ and CI show a reasonable correlation with the specific energy of cutting and production rate. Both of these indicators were found to be dependent on the cut spacing and the interaction between the adjacent cuts, as anticipated. This paper explains the background information on this topic, reviews the laboratory testing, and offers analysis of the results of grain size distribution and its relationship with specific energy and cutting geometry. It should be noted that the experimental program was limited to only one rock type and additional testing on the other rock types is required to expand the results of the current study.