Mass,Volume and Velocity of the Antarctic Ice Sheet: Present-Day Changes and Error Effects

This study examines present-day changes of the Antarctic ice sheet (AIS) by means of different data sets. We make use of monthly gravity field solutions acquired by the Gravity Recovery and Climate Experiment (GRACE) to study mass changes of the AIS for a 10-year period. In addition to ‘standard’ solutions of release 05, solutions based on radial base functions were used. Both solutions reveal an increased mass loss in recent years. For a 6-year period surface-height changes were inferred from laser altimetry data provided by the Ice, Cloud, and land Elevation Satellite (ICESat). The basin-scale volume trends were converted into mass changes and were compared with the GRACE estimates for the same period. Focussing on the Thwaites Glacier, Landsat optical imagery was utilised to determine ice-flow velocities for a period of more than two decades. This data set was extended by means of high-resolution synthetic aperture radar (SAR) data from the TerraSAR-X mission, revealing an accelerated ice flow of all parts of the glacier. ICESat data over the Thwaites Glacier were complemented by digital elevation models inferred from TanDEM-X data. This extended data set exhibits an increased surface lowering in recent times. Passive microwave remote sensing data prove the long-term stability of the accumulation rates in a low accumulation zone in East Antarctica over several decades. Finally, we discuss the main error sources of present-day mass-balance estimates: the glacial isostatic adjustment effect for GRACE as well as the biases between laser operational periods and the volume–mass conversion for ICESat.     

Modelling the impact of a time-varying wave angle on the nonlinear evolution of sand bars in the surf zone

Sandy beaches are often characterized by the presence of sand bars, whose characteristics (growth, migration speed, etc.) strongly depend on offshore wave conditions, such as wave height and angle of wave incidence. This study addresses the impact of a sinusoidally time-varying wave angle of incidence with different time-means on the saturation height, migration speed and longshore spacing of sand bars. Model results show that shore-transverse sand bars (so-called TBR bars) eventually develop under a time-varying wave angle. Depending on the time-mean, amplitude and period of the varying angle of wave incidence, the mean heights and mean migration speeds of the bars can be larger or smaller than their corresponding values in the case of time-invariant angles. Bars might not even form when the wave angle varies around a too large oblique mean value, whereas bars exist in the case of a time-invariant wave angle. The oscillations in both bar height and migration speed are large if the period of the time-varying wave angle is close to the adjustment timescale of the system and if large differences in the local growth and migration rates of the bars occur during one oscillation period. The oscillations in bar height are a combination of harmonics with the principal period and half the period of the time-varying wave angle, whereas those of migration speed contain only the principal period. Bars that are subject to time-varying wave angles have larger longshore crest-to-crest spacings than those which form under fixed wave angles. Physical explanations for these findings are given. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Radiation transfer in a diffuse and specular reflecting slab with Rayleigh scattering

A method of analysis is presented for solving the radiative transfer problem in an absorbing, emitting, inhomogeneous, and anisotropically scattering plane-parallel medium with specular and diffuse reflecting boundaries and internal source (problem 1). Exact relations for the radiation heat flux at the boundaries of problem 1 are obtained in terms of the radiation density and albedos of the corresponding source-free medium with specular reflecting boundaries (problem 2). Two coupled integral equations for the radiation density and the second moment of the radiation intensity for problem 2 with Rayleigh phase functions are obtained. The Galerkin method is used to solve these equations. Albedos of problem 2 are compared with theF _n method. Numerical results for radiation heat fluxes at the boundaries of problem 1 are tabulated for different forms of the internal source.     

Manganese deposits in a Carboniferous paleokarst profile,Um Bogma region,west-central Sinai,Egypt

The Carboniferous carbonates of the Um Bogma Formation of the west-central Sinai include two rock successions. The lower succesion consists of karstic carbonates, intrakarstic products, weathering varieties, manganese deposits, and soil cover. The lower karstic rocks and the associated soil cover are preserved under a rhythmic alternation of dolostone and shale forming the upper rock succession of the Um Bogma Formation. The all over congruent relations between the manganese deposits and the fossilized karst profile, karst products, and the associated pedogenesis demonstrate the role of weathering in the accumulation of these deposits during Carboniferous karstification. It is clear that the manganese oxides were deposited during the mature stage of Carboniferous karstification, i.e., during the soil formation, preceeding initial diagenetic change of the karstic rocks and final deposition of the related late-diagenetic caliche cement. The geochemical behavior of Mn during the karstification and the microbiological processes involved in pedogenesis played an essential role in the concentration of the manganese ore in the subsoil horizon of the paleokarst profile. The Um Bogma Formation has been subjected to another episode of karstification during the Quaternary and resulted in lowering of the landforms of the Carboniferous carbonates and destruction of the Carboniferous karst and the associated manganese deposits in some localities.     

Radon and thoron content in atmospheric air at Giza,Egypt

Summary The radon and thoron content in atmospheric air at Giza was determined through the period from January (1958 to July 1959) by using the emanometrical technique. The concentration of radon and its decay products was equal to (88±4) 10^–18 Curie/c.c. and that of thoron and its decay products was equal to (51±11) 10^–18 Curie/c.c.     

Estimation of groundwater recharge in arid, data scarce regions; an approach as applied in the El Hawashyia basin and Ghazala sub-basin (Gulf of Suez, Egypt)

In this study, an approach for runoff and recharge estimations that can be applied in arid regions which suffer from lack of data is presented. Estimating groundwater recharge in arid regions is an extremely important but difficult task, the main reason is the scarcity of data in arid regions. This is true for the Eastern Egyptian Desert where groundwater is used for irrigation purposes in agricultural reclamation along the Red Sea coast line. As a result of the scarcity of hydrologic information, the relation between rainfall and runoff was calculated depending on the paleo-flood hydrology information. Two models were used to calculate the rainfall–runoff relationships for El Hawashyia basin and Ghazala sub-basin. Two computer programs known as Gerinne (meaning channel in German) and SMADA6 (Stormwater Management and Design Aid, version 6) were conjunctively used for this purpose. As a result of the model applied to El Hawashyia basin, a rainfall event of a total of 18.3 mm with duration 3 h at the station of Hurghada, which has an exceedance probability of 5–10 %, produces a discharge volume of 10.2 × 10⁶ m³ at the delta, outlet of the basin, as 4.7 mm of the rainfall infiltrates (recharge). For the Ghazala sub-basin, the model yields a runoff volume of 3.16 × 10⁶ m³ transferred from a total rainfall of 25 mm over a period of 3 h, as 3.2 mm of it was lost as infiltration.     

Recharge and contamination sources of shallow and deep groundwater of pleistocene aquifer in El-Sadat industrial city: isotope and hydrochemical approaches

Hydrochemical and isotopic researches were conducted in El-Sadat City groundwater system to identify groundwater alteration, recharge, residence time and extent of pollution. The groundwater salinity gradually increases as the groundwater moves from northeastern to southwestern parts of the city. Groundwater generally shows mineralization decreasing with depth, indicating that the possibility of recent water penetration far below the surface is limited. Shallow groundwater has an elevated level of nitrate, which is attributed to anthropogenic sources due to intensive agricultural activity. The limit of high nitrate water may mark the maximum penetration of groundwater from the surface, which is found in depths <100 m. The northeastern and southwestern industrial areas are highly contaminated by some heavy metals, which may originate from some local industrial effluents. The sewage oxidation ponds seem to show no effect on groundwater; hence, these ponds are not a point source for these heavy metals. Dissolved ions depict five different hydrochemical facies, and stable isotopes define the recharge mechanisms, the origin of groundwater and the hydraulic confinement of deep groundwater. The deep groundwater is untritiated and has long residence times (in the order of thousands of years). Three different hydrochemical groups have been recognized and mapped in El-Sadat City, based on the chemical and isotopic information of the groundwater. These groups have different levels of contamination. The deep groundwater samples are significantly less impacted by surface activities and it appears that these important water resources have very low recharge rates and would, therefore, be severely impacted by overabstraction. The extensive exploitation of groundwater for drinking water supply would shortly be reflected by a gradual decline of the groundwater table in El-Sadat City. Amelioration of groundwater quality requires further management strategies and efforts in the forthcoming years.     

Conceptual model and numerical simulation of the hydrothermal system in Hammam Faraun hot spring, Sinai Peninsula, Egypt

The tectonic position of Egypt in the northeastern corner of the African continent suggests that it may possess significant geothermal resources, especially along its eastern margin. The most of the thermal springs in Egypt are located along the shores of Gulf of Suez and Red Sea. These springs are probably tectonic or nonvolcanic origin associated with the opening of the Red Sea—Gulf of Suez rifts, where the eastern shore of the Gulf of Suez is characterized by superficial thermal manifestations including a cluster of hot springs with varied temperatures. Hammam Faraun area consists of the hottest spring in Egypt where the water temperature is 70°C. Conceptual as well as numerical models were made on the Hammam Faraun hot spring based on geological, geochemical, and geophysical data. The models show that the heat source of the hot spring is probably derived from high heat flow and deep water circulation controlled by faults associated with the opening of the Red Sea and Gulf of Suez rifts.     

Ground motion spatial variability effects on seismic response control of cable-stayed bridges

The spatial variability of input ground motion at supporting foundations plays a key role in the structural response of cable-stayed bridges (CSBs); therefore, spatial variation effects should be included in the analysis and design of effective vibration control systems. The control of CSBs represents a challenging and unique problem, with many complexities in modeling, control design and implementation, since the control system should be designed not only to mitigate the dynamic component of the structural response but also to counteract the effects of the pseudo-static component of the response. The spatial variability effects on the feasibility and efficiency of seismic control systems for the vibration control of CSBs are investigated in this paper. The assumption of uniform earthquake motion along the entire bridge may result in quantitative and qualitative differences in seismic response as compared with those produced by uniform motion at all supports. A systematic comparison of passive and active system performance in reducing the structural responses is performed, focusing on the effect of the spatially varying earthquake ground motion on the seismic response of a benchmark CSB model with different control strategies, and demonstrates the importance of accounting for the spatial variability of excitations.