Summary The results of temperature measurements in six boreholes, drilled near the west shores of the Lake Nasser in the Aswan region
in the Nubian Desert, are reported. Temperature-depth profiles, complemented by thermal conductivity determinations of surface
rock samples, were used to calculate the existing range of heat flow density in the region as 40 ÷ 60 mWm−2, which is consistent with the values from the adjacent areas, reported in the literature. The extrapolated mean annual ground
surface temperatures amount, on the average, to 30°C, which is 3 K higher than the mean annual air temperature in the region. 相似文献
The distribution and sources of PAHs in soil as well as PAHs profiles have been investigated in areas with anthropogenic pollution in the Niger Delta (Nigeria) such as Warri and Ughelli. PAHs were identified in 21 soil samples (0–10cm upper layer) collected in May, 2003. The typical total PAHs level in Niger Delta soil ranged from 182 ± 112 - to - 433 ±256 íg/kg dw. PAH concentrations in soil samples from Warri Refinery, Tanker Loading point and Ugboko via Rapele oil field were quite high ( the mean ÓPAH concentrations were 433, 402 and 384 íg/kg dry weight respectively). The dominant PAHs in soil samples were pyrene, naphthalene and benzo[k]fluoranthene. The soil total PAHs (PAHtot.) concentration, normalized to organic carbon content (OC), ranged from 11.4 to 47.2 mg PAHtot. /kg OC; and showed that organic matter of the soil samples from Quality Control Centre, Ugelli West is highly contaminated with PAHs and had a value of 47.2 ± 31.2 mg PAHtot./kg OC. Two and three ring aromatic hydrocarbons predominated in soil samples from Ughelli West, Tanker Loading point and Delta Steel Company, which is indicative of petrogenic origin. 相似文献
Since the last few decades, cadmium anthropocentric sources have been increased drastically. Various chemical and physical approaches for cadmium remediation have been proposed, but these techniques are quite expensive, not healthy for the environment and not efficient at the low concentration of cadmium. Thus, in the last few years, the cadmium removal by biological approaches has received a great interest. Many bacteria can resist against high concentration of cadmium through different mechanisms. The cadmium-resistant bacteria can be grouped into three levels. The main group consists of bacteria which efflux the cadmium from the cells. The bacteria of the other two groups are capable of detoxifying or binding cadmium. The cadA and cadB gene systems are involved in efflux mechanism, and these encode different efflux pump proteins, while the functional groups such as amine, carboxyl, phosphate and hydroxyl facilitate cadmium binding to bacterial surface such as chemisorption. Many enzymes are involved in the detoxifying the cadmium and make the membrane impermeable against cadmium. This paper also reviews the industrial application of cadmium-resistant bacteria and the future perspectives of genetic engineering, bioelectrochemical system, microbial aggregates and biosorption of cadmium by algae. 相似文献
Identifying highly favorable areas related to a particular mineralization type is the main objective of mineral prospectivity modeling (MPM). The northwestern portion of Ahar-Arasbaran porphyry copper belt (AAPCB) is situated within the Urumieh-Dokhtar magmatic belt (UDMB). Because of owning many worthwhile Cu-Mo and Cu-Au porphyry deposits, this area is entitled to incorporate diverse spatial evidence layers for the MPM. In this paper, a hybrid AHP-VIKOR, as an improved knowledge-driven MPM procedure has been proposed for integration of various exploration evidence layers. For this, the AHP is used to calculate important weights of spatial criteria while the VIKOR is applied to outline ultimate prospectivity model. Six effective spatial evidence layers pertaining to the Varzaghan District are selected: (1) multi-elemental geochemical layer of Cu-Mo-Bi-Au; (2) remotely sensed data of argillic, phyllic, and iron oxide alteration layers; and (3) geological and structural layers of Oligo-Miocene intrusions and fault. In addition, a fuzzy prospectivity model (γ?=?0.9) is implemented to assess the AHP-VIKOR approach. Two credible validation methods comprising normalized density index and success rate curve are adapted for quantitative evaluation of predictive models and enhancing the probability of exploration success. The achieved results proved the higher accuracy of the AHP-VIKOR model compared with the fuzzy model in delimiting the favorable areas. 相似文献
The dengue infectious disease remnants a human health problem in tropical and subtropical countries. In an Auto Regressive model to assess the role of climatic parameter El Niño Southern Oscillation and land surface mean monthly temperture on dengue outbreaks of the Karachi region over the monthly time interval January 2001 to December 2016, subsequent to stabilization of variance, we are able to apply and predict an Auto Regressive Integrated Moving Average Exogenous-Transfer Function model by using the order selection criteria namely Final Prediction Error and Akaike’s information. The results confirmed that ARIMAX (2,1,2) has fitted model, although an Auto Regressive model predicts a smaller decline in dengue data series than the auto Poisson Regression model. Additionally, we developed an alternative model for the Poisson Autoregressive Exogenous model in order (p) and Negative Binomial Auto Regressive Exogenous model, deliver the best fit as compared to the Poisson Auto Regressive Exogenous model whereas indicated by the deviances. The Pearson test showed a strong positive association between temperature and dengue, while ENSO inverse indication. High dengue outbreaks are detected in the months of September, October, and November. This comparative study exposed a significant relationship among monthly dengue and climatic variation by Auto Regressive Integrated Moving Average Exogenous (ARIMAX), Poisson and Negative-Binomial Autoregressive Exogenous (PARX-NBARX) models, while smallest values of AIC (3.89), Negative Binomial Auto Regressive Exogenous, are preferred more accurate model for the next 12 months forecasting. This study has provided useful information for the development of dengue predictions and future warning systems. 相似文献
The present work provides high-resolution modeling of the thermal maturation of the Eocene Thebes Formation using a multi-1D approach. The model focuses not solely on the thermal maturity but also on timing of hydrocarbon generation (primary generation and secondary cracking), adsorption by organic matter, and expulsion. The time-lapse conceptual model was developed using well log data, geochemical analyses, and composite logs. The stratigraphic sequence of the Belayim Marine oil field was subdivided into a time series based on the tectonic framework of the Gulf of Suez. An elevated basal heat flow has been assigned throughout the rifting phases and basin evolution. The simulation developed for seven wells reveals variations in burial, thermal history, and accordingly the thermal maturity. The predicted thermal maturity ranges from immature to mature with a different tendency to generate hydrocarbons (both primary generation of oil and/or gas secondary cracking) dependent on kerogen type, basin development, and burial history. Hydrocarbon generation (oil) starts after the Messinian Time Event during the deposition of the Post-Zeit Formation. Hydrocarbon generation was related to burial rather than basin evolution for the 113-M-27, BM-23, BM-65, and BM-70 wells. Conversely, generation correlated principally to basin development particularly Messinian Time Event for the 113-M-34 well. Expulsion occurred subsequent to generation of thermogenic gas (secondary cracking of generated oil). It is not possible to investigate the relationship between the production index and thermal maturity as a consequence of expulsion that reduced the S1 values. The different levels of thermal maturity (potential, active, and effective source rock) allow for the differentiation of regions of potential hydrocarbon accumulation that were charged from the Thebes Formation. 相似文献
International Journal of Earth Sciences - The Duaringa Basin in eastern Australia is a Late Cretaceous?–early Cenozoic sedimentary basin that developed simultaneously with the opening of the... 相似文献
In this study, the relation between ore grade and geological characteristic has been studied as a principle and also important conceptual in Zarshuran gold deposit in NW Iran. The main subject in this study was identifying a correlation among the ore grade populations and rock types which could be used in other steps of local estimation in the deposit concentration–number (C–N) fractal model and logratio matrix. The C–N log–log plot reveals six geochemical zones defined by Au?<?0.02 ppm as non-mineralized zone and Au?>?0.02 ppm as mineralized zones. According to geological logging and field geology inspection, black gauge, jasperoid, fault gauge and breccia, and carbonaceous rocks are considered as main rock types which contain major Au mineralized zones. The correlation between geological and fractal modeling by logratio matrix shows that there is a good correlation between geological assumed host rocks and C–N fractal modeling. Black gauge rock type with 93.48 % of overall accuracy shows a significant correlation with supergene zone of fractal model, and jasperoid with 92.5 % and carbonaceous rock type with 52.90 % have a decent correlation with highly and lowly mineralized zone of fractal model relatively. Black gauge, jasperoid, and fault gauge and breccia have an approximately near cooperation in this zone for mineralization. 相似文献
Clay minerals and clayey soils have been extensively researched over the last century leading to a rich and still evolving corpus of knowledge on clay chemistry, microstructure and macroscopic behaviour. Clay has the ability, under certain conditions, to spontaneously repair its cracks. However, despite ample evidence, clay self-repair remains understudied and under-theorised. For example, the majority of experimental studies discussing clay self-repair infer its existence from changes to macroscopic properties assumed to be caused by self-repair, and only a small number of studies have attempted to observe self-repair directly. This paper reviews the literature on clay self-repair. First, it situates clay self-repair within the broader context of self-repairing material. Next, autogenous self-repair of clay, under wet-dry cycles, freeze–thaw cycles and deep-ground consolidation, is presented focusing on evidence, driving mechanisms and key variables of influence. Next, theories of clay self-repair proposed in the literature are discussed, highlighting their scope and limitations, as well as the extent to which they have been validated by experimental observations. Key gaps in current knowledge of clay self-repair are highlighted and ways in which they can be addressed in future research are proposed. Finally, a nomenclature distinguishing between different kinds of clay self-repair is proposed based on eight different attributes.