An initial formal model for spatial data infrastructures

The Commission on Spatial Data Standards of the International Cartographic Association is working to define formal models and technical characteristics of Spatial Data Infrastructures (SDI). To date, this work has been restricted to the Enterprise and Information Viewpoints from the ISO Reference Model for Open Distributed Processing standard. The Commission has developed models for these two viewpoints. These models describe how the different parts of an SDI fit together in the viewpoints in question. These models should be seen as a contribution towards the overall model of the SDI and its technical characteristics. During the model development process, the roles of the different Actors in an SDI in the Enterprise and Information Viewpoints have also been identified in Use Case diagrams of an SDI. All the models have been developed using the Unified Modeling Language.     

The composition of Titan's stratosphere from Cassini/CIRS mid-infrared spectra

We have analyzed data recorded by the Composite Infrared Spectrometer (CIRS) aboard the Cassini spacecraft during the Titan flybys T0-T10 (July 2004-January 2006). The spectra characterize various regions on Titan from 70° S to 70° N with a variety of emission angles. We study the molecular signatures observed in the mid-infrared CIRS detector arrays (FP3 and FP4, covering roughly the 600-1500 cm⁻¹ spectral range with apodized resolutions of 2.54 or 0.53 cm⁻¹). The composite spectrum shows several molecular signatures: hydrocarbons, nitriles and CO₂. A firm detection of benzene (C₆H₆) is provided by CIRS at levels of about 3.5×¹⁰⁻⁹ around 70° N. We have used temperature profiles retrieved from the inversion of the emission observed in the methane ν₄ band at 1304 cm⁻¹ and a line-by-line radiative transfer code to infer the abundances of the trace constituents and some of their isotopes in Titan's stratosphere. No longitudinal variations were found for these gases. Little or no change is observed generally in their abundances from the south to the equator. On the other hand, meridional variations retrieved for these trace constituents from the equator to the North ranged from almost zero (no or very little meridional variations) for C₂H₂, C₂H₆, C₃H₈, C₂H₄ and CO₂ to a significant enhancement at high northern (early winter) latitudes for HCN, HC₃N, C₄H₂, C₃H₄ and C₆H₆. For the more important increases in the northern latitudes, the transition occurs roughly between 30 and 50 degrees north latitude, depending on the molecule. Note however that the very high-northern latitude results from tours TB-T10 bear large uncertainties due to few available data and problems with latitude smearing effects. The observed variations are consistent with some, but not all, of the predictions from dynamical-photochemical models. Constraints are set on the vertical distribution of C₂H₂, found to be compatible with 2-D equatorial predictions by global circulation models. The D/H ratio in the methane on Titan has been determined from the CH₃D band at 1156 cm⁻¹ and found to be . Implications of this deuterium enrichment, with respect to the protosolar abundance on the origin of Titan, are discussed. We compare our results with values retrieved by Voyager IRIS observations taken in 1980, as well as with more recent (1997) disk-averaged Infrared Space Observatory (ISO) results and with the latest Cassini-Huygens inferences from other instruments in an attempt to better comprehend the physical phenomena on Titan.     

An analysis of wave dissipation at the Hendijan mud coast, the Persian Gulf

Effects of non-rigid muddy bed on the wave climate at the Hendijan coast along the northwestern part of the Persian Gulf have been examined through field measurements and numerical wave transformation modeling. The field survey included measurements of wave characteristics at an offshore and a nearshore station, and mud sampling to obtain the thickness of the fluid mud layer and its rheological properties. Comparisons of wave spectra at the two stations show energy dissipation along the wave trajectory with higher dissipation in the wave period band around 6?s, because depending on the site a given frequency band tends to be more effective in wave–mud interaction. Dissipation induced by the non-rigid bed is introduced into the REF/DIF wave transformation model through the application of viscoelastic constitutive equations for fluid mud. Numerical outputs of the nearshore wave height, for which the viscoelastic parameters included in the model were obtained independently from oscillatory frequency-sweep tests, are found to be comparable with measured values at the nearshore station. This implies that the model is useful for estimating the design wave conditions in the study area.     

Evaluation of a nonlinear seismic geotechnical site response analysis method subjected to earthquake vibrations (case study: Kerman Province, Iran)

Equivalent static load and dynamic analyses methods are usually used for designing structures under and subjected to earthquake excitations. Estimation of site response from an earthquake is fundamental step to anticipate the possible damages and then to try to mitigate them. In this paper, the effect of nonlinearity on site response analyses summarized and evaluating ground surface response taking into account the local soil and subsurface soils properties for the proposed bridge over the river at Sirdjan Boulevard road subjected to earthquake vibration and provokes with assumption of rigid (viscoelastic) and elastic half space bedrock and quantify the site effect on the surface over a number of geotechnical areas has been notified. First, by field investigation, the required data were collected and by primary processing the acceptable data were selected. Then, in nonlinear analysis, for elastic and rigid half space bedrock, standard hyperbolic model was selected and executed, and then the results were compared to each other. The critical point of this work was to develop and use a computer code by the authors, named the “Abbas Converter”, with several advantages, such as work and quick installation, operating as a connecter function between the used softwares and generating the input data corresponding to defined format for them. Its output results can easily be exported to the other used softwares in this study. This code can make and render this study more easily than the previous softwares have done, and take over the encountered problem. This study clearly showed the applicability of the “Abbas Converter” for evaluation of site response with bedrock-type assumption on soil behavior under the earthquake excitations. The proposed scheme is used to analyze the ground motion data from the Bam earthquake in Kerman Province, Iran (2003, M_w 6.5).     

A new approach to interpret self-potential anomaly over a two-dimensional inclined sheet using complex gradient analysis

A new approach is developed to determine the model parameters of a two-dimensional inclined sheet from self-potential anomaly. In this method, the numerical horizontal self-potential gradient obtained from self-potential anomaly is convolved using Hilbert transform to obtain the vertical self-potential gradient. The complex gradient is the sum of horizontal and vertical gradient anomalies. The horizontal and vertical gradients are plotted in one graph to form the complex gradient graph. By defining few characteristic points and distances along the complex gradient profile, procedures are then formulated using the analytical functions of the complex gradients to obtain the model parameters of sheet-like structures. The validity of the new proposed method has been tested on synthetic data with and without random noise. The obtained parameters are in congruence with the model parameters when using noise-free synthetic data. After adding 10% random error in the synthetic data, the maximum error in model parameters is 11.8%. Moreover, the method have been applied to analyze and interpret the self-potential anomaly measured on a graphite ore body at southern Bavarian woods, Germany to prove its efficiency where an acceptable agreement has been noticed between the obtained results and the other published results.     

Mineralogy and palynology of the Mesopotamian plain sediments, Central Iraq

This work was done on the representative section (230 cm) in Dora site which located in Baghdad in the central of the Mesopotamian Plain. Eleven soil samples were examined mineralogically and palynologically. Grain size analyses showed that silt is the higher fraction (61%), clay is the least (9%), whereas sand forms 30%. Translucent and opaque heavy minerals contributed 57% from the sand fraction, whereas the light minerals formed just 43%. The type of heavy minerals and its maturity defined four provenances—they are granitic, basic igneous and metamorphic rocks—that belong to the high lands of south Turkey and north of Iraq. The fourth provenance is the sedimentary rocks which are located north of Mesopotamian Plain around the Tigris River and their tributaries. Dinoflagellate within thin bed of marine origin clearly indicated the transgression of the Arabian Sea northward through Tigris and Euphrates valleys or high marine waves reached to Baghdad before 10,000 years P.B. approximately. This means that the marine sediments were also an additional source of the Mesopotamian Plain. Three specific climatic features are identified via palynological interpretation; a temperate-wet climate extended from 10,000 to 5,000 years P.B. followed by dry period extended from 5,000 to 3,500 years P.B. and the last climatic feature is characterized by oscillation of wet to dry periods which is dominant since 3,500 till now.     

United Arab Emirates limestones: impact of petrography on thermal behavior

The thermal behavior of selected limestones from representative localities of the United Arab Emirates is investigated for their suitability for soft-burnt lime production. The limestone samples were collected from the Ghalilah, Musandam, Shauiba, Muthaymimah, Dammam and Asmari formations. The samples were characterized for petrography, mineral and chemical composition, together with physico-mechanical characteristics. Investigative methods included transmitted light microscopy (TLM), cathodoluminescence (CLM) and scanning electron microscopy (SEM), as well as X-ray micro-tomography (μ-CT), XRD, XRF and Archimedes method. The limestone samples were fired in an electrical muffle furnace for 0.25, 0.5, 1 and 2 hours at 800, 900, 1,000 and 1,100 °C. After firing the lime grains were tested to determine their hydration rate and microfabric. The Ghalilah and Musandam limes show the lowest and highest maximum hydration rates, respectively, due mainly to the impure nature of the former, and the smaller lime crystallites and dominance of post-calcination micro-cracks of the latter. The Dammam and Asmari limes preserve a “ghost” microfabric of the original limestone. Higher allochem contents impose lower activation energy requirements for calcination, which implies earlier calcination of the allochems. The Musandam, Shauiba and Muthaymimah limestones may be useful for the production of reactive soft-burnt lime under the applied firing conditions, however, the Dammam and Asmari limestones need more advanced calcination conditions than the applied ones. The Ghalilah limestone was found to be unsuitable for the production of lime.     

Effect of Fe2+ amendment on photodegradation kinetics of imidacloprid in moist soil

The present study deals with the effect of Fe²⁺ on degradation kinetics of imidacloprid in moist soil under UV system. The moist soil samples were spiked with imidacloprid and irradiated in specially designed UV-photoreactor. The analysis of imidacloprid was carried out by using HPLC–DAD system. UV irradiation caused about ten fold increase in photodegradation rate of the pesticide. Amendment of soil with Fe²⁺ at concentrations of 30 mg/kg led to a further increase in the rate of photodegradation, i.e., a 98 % degradation of imidacloprid was observed in the presence of iron after 32 days of irradiation. Moreover, the half-life of imidacloprid in Fe²⁺ -amended soil was observed to be reduced to 7 days that in the absence of Fe²⁺ was recorded to be 21 days. Iron was also observed to affect the half-life of imidacloprid in dark. When compared with unsterilized Fe²⁺-amended batch treatments, the t _1/2 in sterilized Fe²⁺-amended batch treatments increased from 58 to 96 days. Imidacloprid-urea was detected by HPLC as the only stable photodegradation byproduct of imidacloprid in the soil.     

Archaeological exploration using magnetic and GPR methods at the first court of Hatshepsut Temple in Luxor, Egypt

The Hatshepsut Temple at Luxor, southern Egypt was built as a garden for Amun, and the first court indeed had exotic trees and vegetations. The pathway to the temple was along a sphinx-lined causeway linking the valley to pylons, which are missing now. As an effort to outline remains of the vanished garden and missing pylons and any other possible archaeological structures at this first court site, an extensive integrated magnetic/ground-penetrating radar (GPR) geophysical survey was conducted. The magnetic survey covered the entire area of the first court (100?×?60 m), while the GPR survey covered only an area of 50?×?50 m. The acquired GPR data were processed and presented as 2-D depth sections providing a reasonable vertical/horizontal resolution for the upper 6 m of the investigated site. The acquired magnetic data was processed and presented as 2-D image. The integrated interpretation of the acquired GPR and magnetic data revealed some archaeological features including a rectangular depression which is presumably an ancient man-made pond in the garden of the temple, a rectangular feature that may be a foundation of the missing pylon of the temple, and a suite of aligned anomalies that could be the remnants of sphinx. Such findings reflect the archaeological potentiality of the surveyed site and outline the extension of the temple. Meanwhile, these results necessitate further geophysical investigation or archaeological excavation to be confirmed.     

Application of VES and TDEM techniques to investigate sea water intrusion in Sidi Abdel Rahman area, northwestern coast of Egypt

The present study is an approach to detect the sea/freshwater interface in Sidi Abdel Rahman area, northwestern coast of Egypt using both vertical electrical sounding and time domain electromagnetic. The measured vertical electrical soundings are interpreted in 1D and 2D manner. The 1D inversion is carried out using the commercial software (RESIST), whereas 2D resistivity nonlinear iterative inversion scheme based on the finite element technique and regularization method was used. The time domain electromagnetic stations are interpreted using Temixxl-4 software by Interpex Ltd. To have the advantages of the vertical electrical sounding in shallow depths and time domain electromagnetic in deep depths, a joint inversion algorithm is applied for the electric profile and the nearby electromagnetic profile. Very low resistivity values have been observed near the coast as well as a considerable salt/fresh water interface. The tip-top portion of the interface lies approximately 1,000 m from the shore line.