Clear sky ultraviolet-B radiation in the English Midlands: A comparison of measured and modelled values

Summary Spectral measurements were made of solar ultraviolet-B (UVB) irradiance at Sutton Bonington (52° 50N, 1° 15W) under cloudless skies using a Licor LI 1800 scanning spectroradiometer. The finite bandpass of the instrument and the steep shape of the UVB spectra caused overestimation of irradiance at short wavelengths. Spectra were corrected mathematically for these effects.The corrected spectra were compared to estimates of global UVB irradiance as a function of zenith angle and amount of ozone. Comparisons were made at 300 nm, 310 nm and 320 nm. Estimates were significantly greater (p = 0.05) than the measurements except at 320 nm where differences were not significant. The differences may have been the result of overestimation of UVB at short wavelengths, since some of the assumptions on which the estimates were based may not be valid for Sutton Bonington conditions.

---

Zusammenfassung Unter wolkenlosem Himmel wurden in Sutton Bonington (52° 50N, 1° 15W) mittels eines Licor LI 1800 Spektroradiometer-Scanners Spektralmessungen von Ultraviolett-B (UVB)-Strahlung durchgeführt. Die endliche Bandbreite des Instruments und der steile Anstieg der UVB-Spektren führten zu einer Überschätzung der Strahlung im kurzwelligen Bereich. Die Spektren wurden in dieser Hinsicht mathematisch korrigiert.Die korrigierten Spektren wurden mit den Schätzwerten der globalen UVB-Strahlung — als Funktion von Zenithwinkel und Ozonmenge — bei 300nm, 310nm und 320nm verglichen. Hiebei erwiesen sich die Schätzwerte wesentlich höher (p = 0,05) als die Meßwerte, nur bei 320nm waren die Unterschiede nicht signifikant. Die Unterschiede könnten aus der Überschätzung von UVB im kurzwelligen Bereich resultieren, da einige der Schätzungsvoraussetzungen auf die Bedingungen in Sutton Bonington nicht zutreffen dürften.

---

---

On leave from Department of Agronomy and Soils, Washington State University, Pullman, WA, U.S.A.

---

With 4 Figures     

Late Devensian environments in the Vale of Mowbray, North Yorkshire, UK: evidence from palynology

Two radiocarbon-dated Lateglacial pollen diagrams from the Vale of Mowbray (northern Vale of York) are presented from sites in the lowlands between the washlands courses of the rivers Swale and Ure in North Yorkshire, an area with little previous palynological research despite its proximity to the Devensian glacial advance limits in eastern England. The profiles, from Snape Mires and Nosterfield, include the Loch Lomond Stadial (Younger Dryas) and the Holocene transition, while that from Snape Mires also includes the period from the early part of the Lateglacial Interstadial. This profile differs from most published Interstadial diagrams from the Yorkshire region in having a long-delayed expansion of tree and shrub taxa. Juniperus (juniper) remains important after vegetation development takes place and the pollen record includes evidence of two cold climate oscillations before the maximum development of Betula (birch) woodland near the end of the Lateglacial Interstadial. At both profiles Artemisia (mugwort) frequencies are lower during the Loch Lomond Stadial than at many regional sites, probably due to edaphic factors in these lowland locations. The two sites provide valuable environmental data that enable comparison between the more wooded Lateglacial vegetation to the south in the Vale of York and Humberside and the more open contemporaneous vegetation to the north in the Durham and Northumberland lowlands.     

Strain-rate estimation using fractal analysis of quartz grains in naturally deformed rocks

The area-perimeter fractal dimension (D) of quartz grains has earlier been proposed as a strain-rate gauge based on experimental deformation of quartz aggregates. To test the application in naturally deformed rocks, D is calculated in (a) three quartzites belonging to the Lunavada Group of rocks (Aravalli Mountain Belt, NW India) that developed textures between 420–600°C and (b) one quartz reef sample from the Malanjkhand Granite (Central India), which underwent dynamic recrystallization between 250–400°C. Using the above T ranges and calculated D values, strain-rates are calculated for the two sets of samples. A 10^−12.7 s⁻¹ strain rate at 250°C is calculated for the quartz reef sample. However, at higher temperatures the calculated strain-rate is >10⁻¹⁰ s⁻¹ for the quartz reef and the quartzite samples. The quartzites show evidence of dynamic recrystallization by grain boundary migration (GBM) and subgrain rotation (SGR), while the quartz reef is replete with evidence of bulging (BLG) recrystallization. T and calculated strainrates are plotted on available recrystallization map of quartz. It is demonstrated that whilst the T/strain-rate of the quartzites does not fall in the region of GBM and SGR, the T/strain-rate of the quartz reef falls in the BLG region. The problems with strain-rate calculations using area perimeter fractal dimension are discussed. It is concluded that the method of strain-rate calculation can be used only for lower T.     

The structural vulnerability in the framework of natural hazard risk analyses and the exemplary application for storm loss modelling in Tyrol (Austria)

In the context of natural hazard-related risk analyses, different concepts and comprehensions of the term risk exist. These differences are mostly subjected to the perceptions and historical backgrounds of the different scientific disciplines and results in a multitude of methodological concepts to analyse risk. The target-oriented selection and application of these concepts depend on the specific research object which is generally closely connected to the stakeholders’ interests. An obvious characteristic of the different conceptualizations is the immanent various comprehensions of vulnerability. As risk analyses from a natural scientific-technical background aim at estimating potential expositions and consequences of natural hazard events, the results can provide an appropriate decision basis for risk management strategies. Thereby, beside the preferably addressed gravitative and hydrological hazards, seismo-tectonical and especially meteorological hazard processes have been rarely considered within multi-risk analyses in an Alpine context. Hence, their comparative grading in an overall context of natural hazard risks is not quantitatively possible. The present paper focuses on both (1) the different concepts of the natural hazard risk and especially their specific expressions in the context of vulnerability and (2) the exemplary application of the natural scientific-technical risk concepts to analyse potential extreme storm losses in the Austrian Province of Tyrol. Following the corresponding general risk concept, the case study first defines the hazard potential, second estimates the exposures and damage potentials on the basis of an existing database of the stock of elements and values, and third analyses the so-called Extreme Scenario Losses (ESL) considering the structural vulnerability of the potentially affected elements at risk. Thereby, it can be shown that extreme storm events can induce losses solely to buildings and inventory in the range of EUR 100–150 million in Tyrol. However, in an overall context of potential extreme natural hazard events, the storm risk can be classified with a moderate risk potential in this province.     

A wave model for the Great Barrier Reef

A new wind wave generation model, WAMGBR, is presented that has been adapted from WAM especially for use in the complex geometry of the Great Barrier Reef. A technique (reef parameterization) has been presented that incorporates sub-grid scale dissipation caused by coral reefs. Three other improvements to WAM have been proposed. An explicit/implicit finite difference scheme has been implemented that allows for more efficient modelling (longer time steps) while maintaining diffusive characteristics that are at least as good as those of WAM. An offset in discrete angles creates more uniform diffusive characteristics. And, a transformed spherical coordinate system allows for more efficient grid sizes and smaller grid dependent refraction. Comparisons between modelling techniques and between model and measured data show that WAMGBR produces very good results in the difficult challenge of modelling both non-cyclonic and tropical cyclone waves in the geographically complex environment of the Great Barrier Reef.     

A review of the numerical modelling of salt mobilization from groundwater-surface water interactions

Salinization of land and water is a significant challenge in most continents and particularly in arid and semi-arid regions. The need to accurately forecast surface and groundwater interactions has promoted the use of physically-based numerical modelling approaches in many studies. In this regard, two issues can be considered as the main research challenges. First, in contrast with surface water, there is generally less observed level and salinity data available for groundwater systems. These data are critical in the validation and verification of numerical models. The second challenge is to develop an integrated surface-groundwater numerical model that is capable of salt mobilization modelling but which can be validated and verified against accurate observed data. This paper reviews the current state of understanding of groundwater and surface water interactions with particular respect to the numerical modelling of salt mobilization. 3D physically-based fully coupled surface-subsurface numerical model with the capability of modelling density-dependent, saturated-unsaturated solute transport is an ideal tool for groundwater-surface water interaction studies. It is concluded that there is a clear need to develop modelling capabilities for the movement of salt to, from, and within wetlands to provide temporal predictions of wetland salinity which can be used to assess ecosystem outcomes.     

The role of sediment specific gravity and availability on cluster evolution

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.     

Statistical properties of optical refractive index fluctuations in the marine boundary layer

The optical refractive index fluctuation has been determined from measurements of turbulent temperature and humidity fluctuations in the atmospheric surface layer over the ocean. Probability density, spectral density and even- and odd-order structure functions of the refractive index fluctuation are presented. The spectral density exhibits a significant -5/3 inertial subrange as a result of the existence of a -5/3 subrange in the spectra of temperature and humidity fluctuations and in the temperature-humidity co-spectrum. The behaviour in the inertial subrange of fourth- and sixth-order structure functions of the refractive index is in reasonable agreement with that predicted by the analysis of Antonia and Van Atta (1975, 1978). The third-order structure functions of the refractive index exhibit an approximately linear dependence on separation in the inertial subrange, in agreement with a ramp model for the large coherent structure of the motion.     

Statistics-based outlier detection for wireless sensor networks

Wireless sensor network (WSN) applications require efficient, accurate and timely data analysis in order to facilitate (near) real-time critical decision-making and situation awareness. Accurate analysis and decision-making relies on the quality of WSN data as well as on the additional information and context. Raw observations collected from sensor nodes, however, may have low data quality and reliability due to limited WSN resources and harsh deployment environments. This article addresses the quality of WSN data focusing on outlier detection. These are defined as observations that do not conform to the expected behaviour of the data. The developed methodology is based on time-series analysis and geostatistics. Experiments with a real data set from the Swiss Alps showed that the developed methodology accurately detected outliers in WSN data taking advantage of their spatial and temporal correlations. It is concluded that the incorporation of tools for outlier detection in WSNs can be based on current statistical methodology. This provides a usable and important tool in a novel scientific field.     

Fishing for diatoms: fish gut analysis reveals water quality changes over a 75-year period

Defining the reference state of some perturbed streams and rivers is challenging since their non-altered state is undocumented. Despite the near-absence of pristine sites in highly anthropogenic areas, information about aquatic communities that existed prior to human disturbance can be obtained from historic sources. Sediment coring is commonly used in paleolimnology to estimate past environmental conditions of lakes, but this technique is often not appropriate for studies of lotic systems. An alternative is to use diatom assemblages present in the guts of fish that were captured in the streams prior to significant human disturbance. The purpose of the present study was to evaluate the biological integrity of several streams in Ontario and Québec during the early twentieth century based on “paleo” diatom assemblages extracted from the guts of fish stored in museums. The Eastern Canadian diatom index (IDEC: Indice Diatomées de l’Est du Canada) was used to evaluate the biological status of “paleo” and “modern” diatom assemblages. The IDEC shows the position of diatom assemblages on a general pollution gradient. The comparison of IDEC values calculated for the 1925–1948 and the 2003–2007 periods showed that several streams were severely polluted in the early 1900s. In general, present water quality has declined compared to the early 1900s. The biological integrity of only three of the 22 sites has increased. IDEC values were not influenced by the species of fish studied.