Weathering characteristics of arctic islands in northern Norway

The arctic islands of the Lofoten-Vesterålen archipelago in northern Norway have a wide distribution of weathered land surfaces commonly located above 250 m with several apparent similarities. In order to investigate the characteristics of (deep) weathering in this region, northern Langøya and Hadseløya were chosen for in-depth analyses. Eight weathering profiles were excavated from various surfaces, and the stratigraphies were logged in detail. Material was collected throughout the weathering horizons, and all samples were subsequently analysed for clay mineralogy (< 63 μm fraction) and grain size distribution. The sampling strategy was complemented by samples from additional saprolites and other landforms such as moraines and rock glaciers. The XRD results indicate that the presence of secondary minerals, such as gibbsite (Al(OH)₃) and kaolinite (Al₂Si₂O₅(OH)₄), are very common throughout the profiles. Gibbsite is an extreme end product of silicate weathering and usually associated with a warmer and more humid climate, as found in Scandinavia during the Tertiary. The grain size analyses (< 63 μm) show that the finer silt fractions (< 8 μm) tend to be high in the profiles (20–40%), with significant amounts of clay (5–15%) demonstrating that the regolith itself is susceptible to frost sorting mechanisms.¹⁰Be exposure dates from in situ quartz knobs on tors and boulders of local origin suggest > 40,000 years of subaerial conditions. Considering the steady surface erosion, this figure should be viewed as an absolute minimum age estimate. Mapping of the superficial sediments and geomorphological features of the study areas has revealed several common morphological features, which indicate dominance of glacial and periglacial processes in the areas lying below the lower boundary of blockfields (c. 250 m). The weathering mantles are not a periglacial end product, but rather a relict tertiary landform that were modulated by permafrost processes as well as biological processes at later stages. The regolith cover constrain the vertical extension of warm-based Quaternary ice sheets challenging the notion of a parabolic ice mass consuming every mountain top of Lofoten and Vesterålen.     

库车坳陷侏罗系煤成气动力学模拟研究

应用黄金管—高压釜封闭体系热模拟实验与GC、GC-IRMS分析技术,结合KINETICS专用软件,对库车坳陷侏罗系煤成气进行了动力学模拟研究。库车坳陷侏罗系煤具有高的产气性,在高演化阶段主要产甲烷气;侏罗系煤热解气甲烷碳同位素为-36‰～-25‰,乙烷碳同位素为-28‰～-16‰;甲烷、C2-C5气态烃的生成活化能分别为(47～64k)calm/ol、(55～72k)calm/ol,频率因子各为5.265×1013s-1、5.388×1018s-1。在此基础上,进一步探讨了克拉2气田天然气的成因。研究认为,克拉2气田天然气属阶段捕获的煤成气,主要聚集了5～1Ma时期的天然气,其成熟度Ro分布范围为1.3%～2.5%。     

Avalanche Risk During Backcountry Skiing – An Analysis of Risk Factors

Skier-triggered avalanches are the main cause of avalanche accidents in backcountry skiing. The risk of accidents during backcountry skiing was analysed statistically and related to factors such as elevation level, aspect, stability rating and the time of the year. The analysis is based on a database about terrain usage and avalanche accidents from a large heli-skiing operator in Canada, which makes it possible to study the conditional probability of accidents given the recorded pattern of terrain usage. This study shows that the historical risk of accidentally triggering an avalanche greater than size 1 depends highly on the stability rating, with the highest risk occurring during “poor” stability. The risk is greater at high elevations, and it is lower during the late season than earlier on. Skier risk does not depend as much on aspect as may be indicated from avalanche data alone. However, it is relatively high in the N–NE–E sector. These factors are not independent of each other and therefore analyses of combined factors were also performed. Questionnaires and interviews were used to gain knowledge about the terrain selection of professional mountain guides. These results indicate that when selecting terrain, guides first look at the overall shape and size of the terrain, but avalanche history of terrain and inclination are also important factors. Finally, remarks in avalanche reports were analysed, and common human factors identified.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

酶法催化餐饮废油制备生物柴油的研究

以废物资源转化为宗旨,利用固定化脂肪酶催化餐饮废油与乙醇反应制备生物柴油,通过实验获得最佳酯化反应条件:反应温度47℃、有机溶剂为正己烷、醇油比3∶1,5次投加乙醇,酶用量为0.3g,反应时间32h时,生物柴油产率可达81%。     

Detrital Zircon of 4100 Ma in Quartzite in Burang, Tibet

A detrital zircon aged 4.1 Ga is discovered by the SHRIMP U-Pb method in a quartzite in Burang County, western Tibet. This is presently the oldest single-grain detrital zircon in China. The Th-U ratios of the two testing points of the 〉4.0 Ga zircon are between 0.76 and 0.86, indicating their magmatic origin. This discovery has offered an important age for investigating the geological evolution of the Qinghai-Tibet Plateau.     

重力斜导数方法在时间域中的理论模型与研究

Miller和Singh在1994年首次提出了斜导数(Tilt梯度)的定义,J.Derek Fairhead和Chris M.Green又于2004年在斜导数的基础上提出了Tilt梯度水平导数的概念。国内学者已对斜导数及斜导数水平导数展开研究,设定了多体模型、无限延伸倾斜脉模型、有限延伸倾斜台阶模型及埋深相同无限延伸垂直厚板及薄板模型,得出一些结论。针对一些地质体产状的判断,提出非绝对值斜导数水平导数的新概念,并应用于理论模型中验证,得出正确的结论。在上述理论模型基础上补充了断层模型和无限延伸倾斜台阶模型,应用非绝对值水平导数的理论解释地质体的产状,并对上述模型提出新的观点和看法。     

VSP资料约束地层反滤波研究

浅地表的低速带和地层滤波作用导致地震信号的能量衰减,地震子波的高频快速衰减,速度频散的子波变形,对地震底层分析带来了严重的影响。地层反滤波算法就是为了消除地层对子波的影响,利用VSP中的直达下行波推算出每个地层滤波算子,计算出各个地层滤波算子的反算子,然后利用这些反算子恢复出地表记录中损失掉的高频成分,减弱地层滤波对波形的影响,增加地表记录的频率成分和波形的准确度。分析实际地震资料表明,经过地层反滤波处理后的记录频率成分明显提升,地质构造更加准确、清晰。     

叠前时间偏移在华北地区的应用

从应用的角度较详细地论述了三维叠前克希霍夫时间偏移的过程。在给定合理的偏移孔径下,三维叠前克希霍夫时间偏移利用均方根速度对叠前地震数据进行逐道处理,从而得到准确的归位数据。叠前时间偏移相对叠后时间偏移而言,前者能够进一步提高地下信息的成像质量及归位准确性,信噪比和分辨率也得到了改善,能够满足精细的地震资料的解释。因此,三维叠前克希霍夫时间偏移对于速度变化平缓、地下构造较复杂的地区具有广泛的应用价值。