A high-resolution aftershock seismicity image of the 2002 Sultandaği-Çay earthquake (Mw = 6.2), Turkey

A moderate-size earthquake (Mw = 6.2) occurred on 3 February 2002 (07:11:28 GMT) in the Sultanda??-Çay region of southwest Turkey. The mainshock was followed by a strong aftershock of Mw = 6.0 just 2 h after the mainshock, at 09:26:49 GMT. A temporary seismic network of 27 vertical component seismometers was installed to monitor aftershock activity. One thousand sixty nine aftershocks (0.2 < ML < 3.3) were recorded during the period from 5 to 10 February 2002. We analyzed the P and S arrival times and P wave first motion data to obtain high-quality hypocenters and focal mechanisms, which revealed fine details of the fault zone. We infer that the mainshock has ruptured a segment of the Sultanda? Fault Zone that is approximately 37 km long and 7 km wide at depth. The average slip over the rupture plane during the mainshock is estimated to be 32 cm. The linear distribution of the aftershocks and the location of the mainshock epicenter suggest that rupture has initiated in the eastern bending of the fault and propagated unilaterally to the west. The majority of fault plane solutions indicate E–W to ESE–WNW striking oblique–normal faulting mechanisms with an average dip angle of 62° N ± 10° . The high-resolution aftershock seismicity image also shows that faulting involved a complex array of synthetic and possibly antithetic structures during the evolution of the aftershock sequence. The steady increase of the b value towards the west implies that the highest moment release of the mainshock occurred to the west of the epicenter. The study clearly shows the activation of the WNW–ESE-trending Sultanda? Fault Zone along the southern margin of the Ak?ehir-Afyon Graben (AAG). The westernmost end of the aftershock activity corresponds to a structurally complex zone distinct from the main rupture. It is characterized by both ENE–WSW- and NNE–SSW-trending oblique-slip normal faulting mechanisms, the latter being associated with the NNE–SSW-trending Karam?k Graben. The intersection of these two grabens, AAG and Karam?k Graben, provides abundant faults available for failure in this region. The occurrence pattern of large events in recent years indicates a possible migration of earthquakes from east to west. Thus, we conclude that this has an important implication for earthquake hazard for the city of Afyon, which lies along the same fault line and only 20 km west of the termination point of the aftershock zone.     

Geotechnical evaluation of slope and ground failures during the 8 October 2005 Muzaffarabad earthquake, Pakistan

A large devastating earthquake with a magnitude of 7.6 struck in Kashmir on Oct. 8, 2005. The largest city influenced by the earthquake was Muzaffarabad. Balakot town was the nearest settlement to the epicenter, and it was the most heavily damaged. The earthquake caused extensive damage to housing and structures founded on loose deposits or weathered/sheared rock masses. Furthermore, extensive slope failures occurred along Neelum and Jhelum valleys, which obstructed both river flow and roadways. In this article, failures of natural and cut slopes as well as other ground failures induced by the earthquake and their geotechnical evaluation are presented, and their implications on civil infrastructures and site selection for reconstruction and rehabilitation are discussed. It is suggested that if housing and constructions on soil slopes containing boulders as observed in Balakot and Muzaffarabad are allowed, there should be a safety zone between the slope crest and allowable construction boundary.     

The Manyas fault zone (southern Marmara region,NW Turkey): active tectonics and paleoseismology

The Manyas fault zone (MFZ) is a splay fault of the Yenice Gönen Fault, which is located on the southern branch of the North Anatolian Fault System. The MFZ is a 38 km long, WNW–ESE-trending and normal fault zone comprised of three en-echelon segments. On 6 October 1964, an earthquake (Ms = 6.9) occurred on the Salur segment. In this study, paleoseismic trench studies were performed along the Salur segment. Based on these paleoseismic trench studies, at least three earthquakes resulting in a surface rupture within the last 4000 years, including the 1964 earthquake have been identified and dated. The penultimate event can be correlated with the AD 1323 earthquake. There is no archaeological and/or historical record that can be associated with the oldest earthquake dated between BP 3800 ± 600 and BP 2300 ± 200 years. Additionally, the trench study performed to the north of the Salur segment demonstrates paleoliquefaction structures crossing each other. The surface deformation that occurred during the 1964 earthquake is determined primarily to be the consequence of liquefaction. According to the fault plane slip data, the MFZ is a purely normal fault demonstrating a listric geometry with a dip of 64°–74° to the NNE.     

Effects of biosolid application on soil properties and kiwi fruit nutrient composition on high-pH soil

Macro- and micronutrient availability in high-pH soil is a major constraint in crop production especially for the sensitive plants, such as kiwi fruit. A field study was conducted to investigate the multiyear effects of biosolid application on nutrient availability of agricultural soil and elemental sufficiency in kiwi fruit. Solar-dried biosolid applied at 0, 25, 50, 100 and 200 t ha^?1 annually for successive 2 years. The considered soil properties included pH, EC, organic matter, N, P, K, macro–microelements, heavy metals and DTPA-extractable elements were determined. Results showed that biosolid addition significantly reduced to initial soil pH from 8.2 to 7.8 at higher application doses. Optimization of pH resulted in increased levels of soluble elements in all treatments studied. Biosolid application particularly increased Fe, Cu, Zn, Mn and B concentrations to sufficient levels. Among the other elements analyzed, were not significantly affected by biosolid application. Biosolid addition also increased soil DTPA-extractable elements, especially Cd, Cu, Mn, Pb and Zn. Significant increases in DTPA-extractable elements occurred for increasing application rates at 50, 100 and 200 t ha^?1 compared to control. We conclude that municipal biosolid applied at an annual rate at or less than 200 t ha^?1 can be safely used for kiwi fruit production on high-pH soils.     

Limitations on linear elastic procedures in performance assessment of regular frames

Linear elastic analysis procedures are employed exclusively in the traditional seismic design of new structures and widely employed in the seismic assessment of existing structures. It is also a convenient tool for the initial checking of deformations in displacement‐based design. The limitations that should be imposed on linear elastic procedures have been evaluated in this study by comparing the deformation‐based response quantities obtained from response spectrum analysis with those from the nonlinear time history analysis. Both procedures were applied to different design variants of 5, 8, and 12 story moment frames, subjected to 20 strong motion components exhibiting a variety of intensities. Member plastic rotations and interstory drift ratios were employed as the basic response parameter in performance assessment. It has been found that average column demand to capacity ratio (DCR) (the ratio of flexural demand from linear elastic analysis to flexural capacity) and average beam DCR at the critical story are the most effective parameters in determining the validity range of linear elastic procedures in regular moment frames. Limiting values for these response parameters are proposed. Furthermore, amplification factors for member rotation demands predicted by the linear procedures are suggested for moment frames when these limiting values are exceeded. These factors ensure that the amplified linear elastic rotations are not smaller than 84 percentile (mean – 1sigma) of the rotations obtained from nonlinear time history analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Liquefaction of silts: the Adapazari criteria

Ground failures in the form of liquefaction, loss of bearing capacity and soil softening have been observed during the 1999 Marmara (Turkey) earthquake. Research to understand the failure phenomena has been carried out since the earthquakes. This paper attempts to provide explanations to the liquefaction failure of silts in seismic conditions. Findings from a large amount of data collected in the city of Adapazari on the physical and mechanical properties of soils is presented. A geomorphological map of the city has shown that there are surprising horizontal and vertical variations of the facies due to the activity of rivers in the past. Cases of liquefaction appear to have concentrated in former backswamp areas where silts and sandy silts were deposited by crevasse splays. Properties of the soils in zones of liquefaction and non-liquefaction have been determined down to a reasonable depth by measuring the average size, clay content and liquidity index as well as cone penetration resistances with porewater pressures to discover that there is significant discrepancy among those profiles susceptible to liquefaction and non-liquefying deposits. A set of “Adapazari Criteria” is proposed which is intended to improve over the “Chinese Criteria” and is simple enough to be universally applicable. This classification is similar to the existing criteria but emphasizes more on the clay content in addition to measuring the liquid limit and the liquidity index as well as the average size.     

Biosorption Kinetics and Isotherm Studies of Cd(II) by Dried Enteromorpha compressa Macroalgae Cells from Aqueous Solutions

For the first time ever, Enteromorpha compressa macroalgae (ECM), which is commonly found in Turkey, has been used as biosorbent by us. This study aims to investigate the biosorption of Cd²⁺ from aqueous solutions in a batch system by using an alga of ECM in different concentrations, pH levels, agitation rates (90–150 rpm), and contact periods. The maximum biosorption capacity of the ECM was found to be 9.50 mg/g at pH 6, Cd²⁺ initial concentration of 10 mg/L and agitation rate 150 rpm. Cadmium removal efficiency was about 95%. The experimental isotherm data were analyzed using the Langmuir and Freundlich equations. Isotherm parameters for both equations were determined and discussed. The stated biosorption mechanism is explained by the Freundlich isotherm (r² = 0.998) theory. Two simplified kinetic models including a pseudo‐first‐ and second‐order equation were selected to follow the biosorption process. Kinetic parameters; rate constants, equilibrium adsorption capacities and related correlation coefficients, for each kinetic model were calculated and discussed. It was shown that the biosorption of cadmium onto ECM could be described by the pseudo‐second‐order equation (r² > 0.99).     

Investigation of the nature of slip surface using geochemical analyses and 2-D electrical resistivity tomography: a case study from Lapseki area, NW Turkey

The nature and subsurface structure of the slip surface of a landslide was studied on the basis of geochemical analyses and 2-D electrical resistivity tomography (ERT) survey. Head scarp and lateral slip surfaces of the landslide marked by clear slickensided shear planes were composed of the average amounts of clayey silt (32.5%) and sand (67.5%). Energy dispersive X-ray spectroscopy (EDX) data revealed the enrichment of Si (23.24%), Fe (12.2%), Al (9.51%) and C (8.34%) in the elemental composition of the disturbed slip surface. From X-ray diffractometry (XRD) data, six main clay types were determined, such as Volkonskoite, Halloysite, Ferrosilite, Saponite, Illite and Nontronite. The ERT survey displayed that the landslide developed as a reactivation on the upper part of an old landslide body.     

Water balance and water quality in the Çürüksu basin, western Turkey

The purpose of this study is to determine the hydrological properties, groundwater potential, and water quality of the Çürüksu basin, western Turkey, and to contribute to the efforts of providing an adequate water supply for the city of Denizli. To achieve these objectives, the study consisted of mapping the geology and hydrogeology, determining the water balance, and defining the water quality. The basement rock units in the study area include several impervious metamorphic rock types and Mesozoic karstic limestone, which are overlain by Oligocene fluvial and lacustrine strata, Pliocene travertine and limestone, and Quaternary alluvium. The karstic limestone and the travertine and limestone strata constitute potential aquifers in the Çürüksu basin. The discharge regimes of the 22 springs in the two basins show little change through the year. The flow systems of the springs also have a large storage capacity and drainage occurs very slowly. The discharge of the springs does not appear to be affected immediately by monthly variations in precipitation. According to the water balance, the precipitation in the Çürüksu basin cannot provide all of the measured surface runoff. Excess runoff is 2?m3?s–1 in the Çürüksu basin, and in the adjacent Gökp?nar basin the deficit in surface runoff is also 2?m3?s–1. Thus, the underground catchment area of the springs extends beyond the surface drainage area of the Çürüksu basin. Although the P?narba??, Kazanp?nar, and Böceli springs emerge from the karstic limestone aquifer in the Çürüksu basin, these springs are fed from the adjacent Gökp?nar basin. The spring waters emerging from karstic limestone are fresh, of the calcium bicarbonate type, soft, and potable. The spring waters emerging from the travertine and limestone aquifer are low-temperature, brackish, of the calcium sulfate type, very hard, and not potable but useful for the irrigation. The occurrences of coal strata and hydrothermal activity have caused some deterioration of groundwater quality.