A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

四川石棉独立碲矿床蚀变岩的地质地球化学研究

四川石棉大水沟独立碲矿床堪称世界首例，其矿体两侧的围岩蚀变较窄，且蚀变带与矿脉及未蚀变岩呈清楚而截然的接触关系。主要围岩蚀变为白云石化、白（绢）云母化、云英岩化及电气石化等。这些蚀变作用分别发生于１７７．７～１６５．１Ｍａ和９１．７１～８０．１９Ｍａ。蚀变作用过程中ＳｉＯ２大量析出，Ａｌ２Ｏ３、ＴｉＯ２、ＣａＯ、ＭｇＯ、Ｋ２Ｏ、Ｈ２Ｏ、ＣＯ２、Ｆｅ２Ｏ３、ＭｎＯ则有不同程度地带入。与此同时，ＲＥＥ在此过程中包集体迁出，Ｔｅ、Ｂｉ、ＡＳ等元素的含量则决定于蚀变作用及其强度，而与原岩无关。     

The influence of a non‐associated flow rule on the calculation of the factor of safety of soil slopes

This paper presents a method that incorporates a non‐associated flow rule into the limit analysis to investigate the influence of the dilatancy angle on the factor of safety for the slope stability analysis. The proposed method retain's the advantage of the upper bound method, which is simple and has no stress involvement in the calculation of the energy dissipation and the factor of safety. Copyright © 2001 John Wiley & Sons, Ltd.     

△T球体异常的三元解释法

在△Ｔ异常解释课题中，一个新的角度参量─—视磁化特征角的拟定，最大限度地简化了球体磁场表达式。从而才有可能通过特殊解法，给出了球体磁场的极值与拐点公式。作者据此建立了四种不受正常场制约、仅需异常的局部持征曲线即可全面解释三度异常的解释方法。屏障分解、叠加判别、三元迭代的设计，为解释三度体叠加异常给出了简单而易行的途径。     

一类“强降水构造”的观测研究

木文根据1966～1986年20年的观测研究,提出大气中存在一类“强降水构造”,它直观地表现为云区的组合。这类“组合”具有互补性、多尺度性、准静止性和阶段性、利用这些属性,有可能从常规地面图上(站距100-300公里)分析和预报出尺度为10~2公里的大～暴雨区;在省的加密地面图上(站距40～70公里)有可能分析出尺度为10~1公里的局地强对流雨。     

Micro-XANES mapping of sulphur and its association with magnesium and phosphorus in the shell of the brachiopod, Terebratulina retusa

Biominerals are natural composite materials comprising organic and inorganic components. Detailed knowledge of the nature and distribution of both components is a crucial requirement in order to advance our understanding of biomineral formation, their material properties and preservation potential as well as the interpretation of environmental data. Detailed chemical data are essential for our understanding of the nature and distribution of such components. Micro-XANES mapping at the sulphur K-edge reveals that, in the brachiopod Terebratulina retusa, the sulphate concentration is higher in the outer (primary) layer than in the calcite fibres of the secondary layer. This is co-incident with a higher magnesium concentration. In contrast, the sheaths surrounding the calcite fibres contain sulphur as thiol, confirming the presence of protein while, the sulphur within the fibres themselves, occurs as sulphate. Micro-XANES analysis of the insoluble organic extract from T. retusa indicates the presence of organic sulphate while Micro-Raman spectroscopy confirms that structurally substituted sulphate (SSS) is also present although semi-quantitative Raman spectroscopy carried out in this spectral region (wavenumbers 900–1200) indicates that the sulphate present is at the threshold of detection by Raman spectroscopy. The distribution of phosphorus in the shell of T. retusa correlates well with that of protein indicating the presence of phosphorylated proteins in the periostracum, the sheaths surrounding the calcite fibres and the interface between the primary and secondary layer.     

The state of land subsidence and prediction approaches due to groundwater withdrawal in China

This article gives a general introduction to land subsidence with the prediction approaches due to withdrawal of groundwater in three subsided/subsiding regions in China: the deltaic plain of Yangtse River (YRDP), North China Plain (NCP), and Fenwei Plain (FP). On YRDP, Shanghai is the typical subsided/subsiding city; on NCP Tianjin is the typical subsided/subsiding city, and on FP Taiyuan is the typical subsided/subsiding city. The subsided area with subsidence over 200 mm on YRDP is about 10,000 km² and the maximum subsided value reached 2.9 m at Shanghai; on NCP the subsided area reached 60,000 km² with the maximum subsidence of 3.9 m at Tianjing; on FP the subsided area is relatively smaller than that on the other two plains and is about 1,135 km² with maximum subsidence of 3.7 m at Taiyuan city. In order to protect the civil and industrial facilities, it is necessary to predict the future development of land subsidence based on present state. Many researchers proposed several approaches to predict the land subsidence due to groundwater withdrawal according to different geological conditions and groundwater withdrawal practice. This article classifies these approaches into five categories: (i) statistical methods; (ii) 1D numerical method; (iii) quasi-3D seepage model; (iv) 3D seepage model; (v) fully coupled 3D model. In China, the former four categories are presently employed in the prediction practice and their merits and demerits are discussed. According to the prediction practice, 3D seepage model is the best method presently.     

舟山枸杞水域的污损生物生态

本文系１９８８年９月～１９８９年９月在舟山枸杞乌里西岙水域进行挂板试验的结果。共获污损生物１３５种，其中，近岸的油库码头获７７种，远岸的养殖筏获１１０种。动物以亚热带高盐性种类为主，三角藤壶Ｂａｌａｎｕｓｔｒｉｇｕｎｕｓ、小海葵Ａｃｔｉｎｉａ、柯氏分胞孔苔虫Ｃｅｌｌｅｐｏｒｉｎａｃｏｓｔａｚｉｉ、西方三胞苔虫Ｔｒｉｃｅｌａｒｉａｏｃｃｉｄｅｎｔａｌｉｓ、艾氏美熄Ｃｌｔｉａｅｄｗａｒｄｓｉ、广口小桧叶螅Ｓｅｒｔｕｌａｒｅｌｌａｍｉｕｒｒｅｎｓｉｓ等占优势，藻类常见的有长石莼Ｕｌｖａｌｉｎｚａ、肠浒苔Ｅｎｔｅｒｏｍｏｒｐｈｙｉｎｔｅｓｔｉｎａｌｉｓ和日本多管藻Ｐｏｌｙｓｉｐｈｏｎｉａｊａｐｏｎｉｃａ。枸杞污损生物的附着期主要在夏季，附着量也以夏季最大。不同地点附着量的差异极大。夏季由于近岸三角藤壶大量附着，故生物量明显大子远岸，其他季节均是远岸大于近岸。夏季近岸三角藤壶的覆盖面积达１００％，生物量达１８１１９ｇ／ｍ２，占污损生物总生物量的９８％。故夏季是污损生物防除的主要季节，三角藤壶是防除的主要对象。与１９７５～１９７６年嵊山污损生物进行比较，发现两地污损生物的种类组成和群落结构极为相似，说明１０多年以来嵊山