Some implications of statistical transport theory in rock mechanics

Summary Recently, a new theory of the subsidence of rock masses has been advanced byLitwiniszyn and coworkers, which is based on the notion that the individual rock particles perform random walks. It is shown in the present paper that the final equations of the random walk theory can be justified from general principles of statistical mechanics in which no specific theoretical model of particle behaviour has to be made. The theory appears to account appropriately for subsidence phenomena.The research reported in this paper was supported by the Petroleum Research Fund of the American Chemical Society. Acknowledgment is made to the donors of the Petroleum Research Fund administered by the American Chemical Society for support of this reseach.     

Origin of the Nchanga copper–cobalt deposits of the Zambian Copperbelt

The Zambian Copperbelt forms the southeastern part of the 900-km-long Neoproterozoic Lufilian Arc and contains one of the world’s largest accumulations of sediment-hosted stratiform copper mineralization. The Nchanga deposit is one of the most significant ore systems in the Zambian Copperbelt and contains two major economic concentrations of copper and cobalt, hosted within the Lower Roan Group of the Katangan Supergroup. A Lower Orebody (copper only) and Upper Orebody (copper and cobalt) occur towards the top of arkosic units and within the base of overlying shales. The sulfide mineralogy includes pyrite, bornite, chalcopyrite, and chalcocite, although in the Lower Orebody, sulfide phases are partially or completely replaced by malachite and copper oxides. Carrollite is the major cobalt-bearing phase and is restricted to fault-propagation fold zones within a feldspathic arenite. Hydrothermal alteration minerals include dolomite, phlogophite, sericite, rutile, quartz, tourmaline, and chlorite. Quartz veins from the mine sequence show halite-saturated fluid inclusions, ranging from ~31 to 38 wt% equivalent NaCl, with homogenisation temperatures (Th_TOT) ranging between 140 and 180°C. Diagenetic pyrites in the lower orebody show distinct, relatively low δ ³⁴S, ranging from −1 to −17‰ whereas arenite- and shale-hosted copper and cobalt sulfides reveal distinctly different δ ³⁴S from −1 to +12‰ for the Lower Orebody and +5 to +18‰ for the Upper Orebody. There is also a clear distinction between the δ ³⁴S mean of +12.1±3.3‰ (n=65) for the Upper Orebody compared with +5.2±3.6‰ (n=23) for the Lower Orebody. The δ ¹³C of dolomites from units above the Upper Orebody give δ ¹³C values of +1.4 to +2.5‰ consistent with marine carbon. However, dolomite from the shear-zones and the alteration assemblages within the Upper Orebody show more negative δ ¹³C values: −2.9 to −4.0‰ and −5.6 to −8.3‰, respectively. Similarly, shear zone and Upper Orebody dolomites give a δ ¹⁸O of +11.7 to +16.9‰ compared to Lower Roan Dolomites, which show δ ¹⁸O of +22.4 to +23.0‰_. Two distinct structural regimes are recognized in the Nchanga area: a weakly deformed zone consisting of basement and overlying footwall siliciclastics, and a moderate to tightly folded zone of meta-sediments of the Katangan succession. The fold geometry of the Lower Roan package is controlled by internal thrust fault-propagation folds, which detach at the top of the lowermost arkose or within the base of the overlying stratigraphy and show vergence towards the NE. Faulting and folding are considered to be synchronous, as folding predominantly occurred at the tips of propagating thrust faults, with local thrust breakthrough. The data from Nchanga suggests a strong link between ore formation and the development of structures during basin inversion as part of the Lufilian Orogeny. Sulfides tend to be concentrated within arenites or coarser-grained layers within shale units, suggesting that host-rock porosity and possibly permeability played a role in ore formation. However, sulfides are also commonly orientated along, but not deformed by, a tectonic fabric or hosted within small fractures that suggest a significant role for deformation in the development of the mineralization. The ore mineralogy, hydrothermal alteration, and stable isotope data lend support to models consistent with the thermochemical reduction of a sulfate- (and metal) enriched hydrothermal fluid, at the site of mineralization. There is no evidence at Nchanga for a contribution of bacteriogenic sulfide, produced during sedimentation or early diagenesis, to the ores.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.Editorial handling: H. Frimmel     

Investigating the scale of structural controls on chlorinated hydrocarbon distributions in the fractured-porous unsaturated zone of a sandstone aquifer in the UK

Contaminant migration behaviour in the unsaturated zone of a fractured porous aquifer is discussed in the context of a study site in Cheshire, UK. The site is situated on gently dipping sandstones, adjacent to a linear lagoon historically used to dispose of industrial wastes containing chlorinated solvents. Two cores of more than 100 m length were recovered and measurements of chlorinated hydrocarbons (CHCs), inorganic chemistry, lithology, fracturing and aquifer properties were made. The results show that selecting an appropriate vertical sampling density is crucial both to providing an understanding of contaminant pathways and distinguishing whether CHCs are present in the aqueous or non-aqueous phase. The spacing of such sampling should be on a similar scale to the heterogeneity that controls water and contaminant movement. For some sections of the Permo-Triassic aquifer, significant changes in lithology and permeability occur over vertical distances of less than 1 m and samples need to be collected at this interval, otherwise considerable resolution is lost, potentially leading to erroneous interpretation of data. At this site, although CHC concentrations were high, the consistent ratio of the two main components of the plume (tetrachloroethene and trichloroethene) provided evidence of movement in the aqueous phase rather than in dense non-aqueous phase liquid (DNAPL).     

Getting ‘holistic’ about land rehabilitation in hot arid regions

The paper describes Western Australian examples and causes of land degradation. It outlines shortcomings in the methodologies used to rehabilitate these areas. From this a protocol is suggested for an ‘holistic’ approach to land rehabilitation.     

Effective timescales of coupling within fluvial systems

This paper presents a review of the coupling concept in fluvial geomorphology, based mainly on previously published work. Coupling mechanisms link the components of the fluvial system, controlling sediment transport down the system and the propagation of the effects of base-level change up the system. They can be viewed at several scales: at the local scale involving within-hillslope coupling, hillslope-to-channel coupling, and within-channels, tributary junction and reach-to-reach coupling. At larger scales, coupling can be considered as zonal coupling, between major zones of the system or as regional coupling, relating to complete drainage basins. These trends are illustrated particularly by the examples of hillslope-to-channel coupling in the Howgill Fells, northwest England, badland systems in southeast Spain, alluvial fans in Spain, USA and UAE, and base-level-induced dissection of Neogene sedimentary basins in southeast Spain. As the spatial scales increase, so do the timescales involved. Effective temporal scales relate to magnitude and frequency characteristics, recovery time and propagation time, the relative importance changing with the spatial scale. For downsystem coupling at the local scale, the first two are important, with propagation time increasing in importance in larger systems, especially in those involving upsystem coupling related to base-level change. The effective timescales range from the individual event, with a return period of decades, through decadal to century timescales for downsystem coupling, to tens to hundreds of thousands of years for the basinwide response to base-level change. The effective timescales influence the relative importance of factors controlling landform development.     

Phytolith analysis from the archaeological site of Kush, Ras al-Khaimah, United Arab Emirates

Despite the wealth of archaeological sites and excellent conditions for preservation, few phytolith investigations have been undertaken from the Arabian Gulf region. The results from the Sasanian and Islamic archaeological tell of Kush, Ras al-Khaimah, United Arab Emirates, are presented. Kush is situated just inside the Gulf on an important trade route. The occupation sequence dates from the 4^th century A.D. until the 13^th century A.D., recording the development of the site in the Sasanian period, followed by the arrival of Islam in the 7^th century A.D. and the final abandonment of the site in the late 13^th century when the nearby site of al-Mataf (Julfar) began to develop closer to the present day coastline. All the samples analyzed contained abundant phytoliths (short cells, elongated cells, and groups of elongated cells) of various types. They included date palm (Phoenix dactylifera), papillae (possibly from barley (Hordeum)), and hair cells possibly from species of canary grass (Phalaris spp.). Some researchers have suggested that groups of elongated cells may indicate the presence of irrigation in semiarid environments. The present results for this class of phytoliths appeared to imply that intensive irrigation was unlikely to have taken place around Kush.     

Fingerprinting the Origin of Fluvial Suspended Sediment in Larger River Basins: Combining Assessment of Spatial Provenance and Source Type

Investigation of the potential for using sediment fingerprinting to integrate both spatial provenance and source type information for larger drainage basins appears to be desirable. This contribution presents the results of adopting a composite fingerprinting procedure incorporating statistically verified multicomponent signatures and a multivariate mixing model to provide a preliminary integration of spatial provenance and source type information for the upper and middle reaches of the drainage basins of the Rivers Exe (601 km²) and Severn (4325 km²), UK. A nested approach is employed, whereby spatial provenance is addressed in terms of the distinct sub-basin zones constituting each study area as an entirety, and source type is then characterised within each of these distinct spatial zones in terms of surface (woodland, pasture, cultivated) and subsurface (channel bank) materials. The results demonstrate that the fingerprinting approach possesses considerable potential for integrating spatial provenance and source type information, and hence for improving the resolution of existing sediment source information for larger drainage basins.     

A calderas field at the Marifil Formation, new volcanogenic interpretation, Norpatagonian Massif, Argentina

Major volcanogenic structures within the Marifil Formation allowed to determine the location of a claderas field that spreads along 400 kilometers. This field has at least three large calderas with diameters near to 100 kilometers, recognizable by regional distribution of associated dikes and rhyolite lava flows present at the caldera border that separates a monotonous ignimbritic plateau from a depressed (150 meters) inner volcanic collapsed caldera. The Marifil ignimbritic plateau cover more than 50,000 square kilometers with thicknesses that reach 800 meters. Associated with these plateau ignimbrites there is an important fluorite mineralization.     

Automated AF-demagnetization on the 2G-Enterprises through-bore,cryogenic magnetometer

Since the early sixties, alternating field demagnetization (AFD) has been a standard laboratory technique for demagnetizing rocks to expose the multicomponent structure of their natural remanent magnetization (NRM). In the majority of AFD implementations, however, the procedure remains as labour-intensive as ever. The implementation that we have developed at the Australian Geological Survey Organisation, automates the procedure for AFD based on the static method, and results in significant productivity and efficiency gains without compromising data quality. A properly formulated procedure for static AFD may be the only method of retrieving higher-coercivity components of natural remanence in samples prone to developing gyroremanence at higher alternating fields (AFs). Our AFD environment comprises: a 2G-Enterprises through-bore, cryogenic magnetometer; 2G AF-coils and control equipment; and personal computer software, developed by us, to control all procedural aspects for a complete AFD of a sample including, importantly, a counteracting procedure to neutralize the effects of gyroremanence build-up at higher AFs. With our system, AFD of 8 samples/day, each of 20+ steps, requires only 20 min of user attention compared with a full day for conventional systems.     

Trough structures in the Western syenite of Kûngnât, S Greenland: mineralogy and mechanism of formation

In the Western layered syenite stock of the Kûngnât complex, close to the intrusion wall, there are two groups of regularly spaced, horizontally aligned, stacks of infilled troughs. These features resemble, to some extent, the trough layering within the UZa trough zone of the gabbroic Skaergaard¹ intrusion. Such features have never before been described in syenitic rocks. The lower group comprises six stacks of infilled troughs; the upper group comprises seven. The two groups are vertically separated by about 10 m of sparsely layered syenite. The infilled troughs in the upper group are stacked vertically; those in the lower group gradually shift laterally and appear to converge over an antiformal structure. It is not possible to measure the plunge of the troughs due to outcrop geometry. Troughs are up to about 80 cm deep. The material filling the troughs is more melanocratic than the syenite that surrounds them. Individual troughs exhibit normal grading. The syenite within the troughs contains large amphibole and biotite oikocrysts. Faintly layered syenite occurs laterally between stacks. Minerals in the host syenite are more ferroan than those in the troughs, this is thought to represent re-equilibration with residual melt. Feldspar textures, irregular pyroxene and apatite zoning, and the presence of irregular shaped amphibole patches within pyroxene grains all imply alteration by a pervasive deuteric fluid in both troughs and host syenite. We suggest the following hypothesis for the formation of the troughs. A mafic crystal sheath which grows on the walls of the magma chamber becomes detached and flows downwards. The descending slurry forms a series of regularly spaced streams which erode trough shaped channels into the crystal pile at the base of the chamber. Uneroded crystal material separates the channels. Crystals are deposited from these streams. Successive streams flow over each other to generate stacks of troughs.