油田井间CT技术应用试验

本文记述了在扶余油田采用井间电磁波和声波ＣＴ方法进行的试验。阐述了试验的意义、理论基础、计算方法、实施方案及成果几方面。试验结果表明电磁波的工作频率应降低到至少几百ＫＨｚ以下才能适于油田应用。１００ｍ井间距的声波成像获得了成功，两个油层均有清晰显示。最后，对技术的发展提出了建议。     

航磁异常轴向特征提取算法研究及其应用

通过分析航磁异常的空间分布特征，提出一种在平面等值线追踪基础上，根据封闭等值线之间的关系并应用离散卡洛变换，自动检测和绘制航磁异常轴向图的方法，将该方法用于新疆某地航磁异常分析，发现了断裂构造，有效地验证了算法的正确性。     

结构动力反应分析的三阶显式方法

本通过对传统动力反应分析方法的总结，阐明了建立隐式和显式方法的一般思路及数学本质，提出了使用系统位移反向向量三阶导数的隐工和实用显式积分方法－3阶显式方法，分析了该显式方法的精度和稳定性，并对建立更高阶隐式和显式方法以及方法的精度和稳定性作了初步讨论。最后，通过算例对本方法、献[1]方法和经典的常平均加速度法（隐式方法、视为精确解）的精度和稳定性进行了比较分析。结果表明，本方法具有明显的优点。     

井水位气压效率b值动态响应的断层-前兆场主应力组合模式

统计鲁03，04井流水作业闰的气压效率b值发现，在华北及其周缘绝大多数地震前两井前兆异常形态各异，经分析井孔定位断层走向与地震前兆场主应力的组合模式不同是产生上述现象的根本原因。     

Microtremor-based analysis of the dynamic response characteristics of earth-fissured sites in the Datong basin,China

This study conducted microtremor testing along six survey lines that cross three typical earth fissures in the Datong basin to determine the dynamic response characteristics of earth fissure sites with regard to the Fourier amplitude spectrum, response spectrum, and Arias intensity. The results show the following.(1) The predominant frequency of an earth fissure site is mainly affected by the thickness and the shear wave velocity of the soil layer and is minimally effected by the presence of an earth fissure.(2) Earth fissures have a pronounced amplification effect on dynamic response. Fourier amplitude, response acceleration, and Arias intensity are high near an earth fissure and decrease with an increase in distance from the earth fissure, tending toward stability at a distance of 20 m.(3) The area that is seriously affected by this amplification is within 6–8 m of an earth fissure, and the general affected area is farther out than this, to a distance of 25 m.(4) New construction should be avoided in an area affected by the amplification, and existing buildings in general and seriously affected areas need to be reinforced to increase their seismic fortification intensity.     

肺部良性肿块的CT表现

目的是分析了肺部良好性肿块的ＣＴ表现,探讨病变的鉴别诊断,方法用１０例病人中,硬化性血管瘤１例,孤立性肺囊肿２例,１０例均行常规胸部ＣＴ扫描,其中８例行增强扫描。结果得到硬化性血管瘤边缘光滑锐利,密度致密均匀,增强扫描强化特别明显,错构瘤呈爆花米样钙化或梅花瓣样钙化,呈浅分叶状,可有血管连接征,曲菌球,２例在空洞内呈游离状态,１例菌球占满空腔呈分叶状,形似肺癌,但增强扫描无强化,２例肺隔离症分别位     

The crystal structure of (Fe<Subscript>4</Subscript>Cr<Subscript>4</Subscript>Ni)<Subscript>9</Subscript>C<Subscript>4</Subscript>

(Fe4Cr4Ni)9C4 is a metal carbide mineral formed by combination of Fe, Cr and Ni with C. It occurs in a chromite deposit in the Luobusha ophiolite, Tibet. Based on the determination of its crystal structure, the empirical formula is (Fe4.12Cr3.84Ni0.96)8.92C3.70 and the simplified formula is (Fe4Cr4Ni)4C9. The mineral is hexagonal with a = 1.38392(2) nm, c = 0.44690(9) nm, pace group P63 m c, Z=6 and the calculated specific gravity Dx = 7.089 g/cm3. Fe, Cr and Ni occupy different crystallographic sites and their coordination numbers are approximately 12, forming an alternate stacking sequence of flat and puckered layers along the c axis. Some metallic atoms have a defect structure. The interatomic distances of Fe, Cr and Ni are 0.2525-0.2666 nm, and the distances between Fe, Cr, Ni and C are 0.1893-0.2169 nm. The coordination number of carbon is 6. It occurs in interstices of the metallic atoms Fe, Cr and Ni to form trigonalprismatically coordinated polyhedra. These coordination polyhedra are linked with each other via shared corners or shared edges into a new type of metal carbide structure.     

Shifting Correlation Between Earthquakes and Electromagnetic Signals: A Case Study of the 2013 Minxian–Zhangxian ML 6.5 (MW 6.1) Earthquake in Gansu,China

The shifting correlation method (SCM) is proposed for statistical analysis of the correlation between earthquake sequences and electromagnetic signal sequences. In this method, the two different sequences were treated in units of 1 day. With the earthquake sequences fixed, the electromagnetic sequences were continuously shifted on the time axis, and the linear correlation coefficients between the two were calculated. In this way, the frequency and temporal distribution characteristics of potential seismic electromagnetic signals in the pre, co, and post-seismic stages were analyzed. In the work discussed in this paper, we first verified the effectiveness of the SCM and found it could accurately identify indistinct related signals by use of sufficient samples of synthetic data. Then, as a case study, the method was used for analysis of electromagnetic monitoring data from the Minxian–Zhangxian M_L 6.5 (M_W 6.1) earthquake. The results showed: (1) there seems to be a strong correlation between earthquakes and electromagnetic signals at different frequency in the pre, co, and post-seismic stages, with correlation coefficients in the range 0.4–0.7. The correlation was positive and negative before and after the earthquakes, respectively. (2) The electromagnetic signals related to the earthquakes might appear 23 days before and last for 10 days after the shocks. (3) To some extent, the occurrence time and frequency band of seismic electromagnetic signals are different at different stations. We inferred that the differences were related to resistivity, active tectonics, and seismogenic structure.     

Variability of Antarctic Intermediate Water south of Australia and its relationship with frontal waves

A streamfunction EOF method is applied to a time series of hydrographic sections in the Southern Ocean south of Australia to study water mass variations. Results show that there are large thermohaline variations north of the Subantarctic Front (SAF) at 300–1500 dbar level, indicating upwelling and downwelling of the Antarctic Intermediate Water (AAIW) along isopycnal surfaces. Based on the latest altimeter product, Absolute Dynamic Topography, a mechanism due to frontal wave propagation is proposed to explain this phenomenon, and an index for frontal waves is defined. When the frontal wave is in positive (negative) phase, the SAF flows northeastward (southeastward) with the fresh AAIW downwelling (upwelling). Such mesoscale processes greatly enhance cross-frontal exchanges of water masses. Spectral analysis shows that frontal waves in the Southern Ocean south of Australia are dominated by a period of about 130 days with a phase speed of 4 cm/s and a wavelength of 450 km.     

The thermal history and uplift process of the Ouxidaban pluton in the South Tianshan orogen: Evidence from Ar-Ar and (U-Th)/He

The uplift and exhumation process in the Tianshan orogen since the late Paleozoic were likely related to the preservation of ore deposits. This study involved reconstructing the whole tectonic thermal history of the Ouxidaban pluton in central South Tianshan Mountains based on hornblende/plagioclase Ar-Ar and zircon/apatite(U-Th)/He methods. The thermal history and uplift process of central South Tianshan Mountains since the late Paleozoic were analyzed according to the results of previous works and cooling/exhumation rate features. The hornblende yields a plateau age of 382.6±3.6 Ma, and the plagioclase yields a weighted mean age of 265.8±4.9 Ma. The Ouxidaban pluton yields weighted mean zircon(U-Th)/He age of 185.8±4.3 Ma and apatite(U-Th)/He age of 31.1±2.9 Ma, respectively. Five stages of tectonic thermal history of South Tianshan Mountains since the late Paleozoic could be discriminated by the cooling curve and modeling simulation:(1) from the latest Silurian to Late Devonian, the average cooling rate of the Ouxidaban pluton was 7.84°C/Ma;(2) from the Late Devonian to the latest Middle Permian, the average cooling rate was about 2.07°C/Ma;(3) from the latest Middle Permian to the middle Eocene, the cooling rate decreased to about 0.68°C/Ma, suggesting that the tectonic activity was gentle at this time;(4) a sudden increase of the cooling rate(5.00°C/Ma) and the exhumation rate(0.17 mm/a), and crustal exhumation of ~1.83 km indicated that the Ouxidaban pluton would suffer a rapid uplift event during the Eocene(~46?35 Ma);(5) since the middle Eocene, the rapid uplift was sustained, and the average cooling rate since then has been 1.14°C/Ma with an exhumation rate of about 0.04 mm/a and an exhumation thickness of 1.33 km. The strong uplift since the Cenozoic would be related to a far-field effect from the Indian and Eurasian plates' collision. However, it was hysteretic that the remote effect was observed in the Tianshan orogenic belt.