Carbon and oxygen isotopic composition of car- bonate cements of different phases in terrigenous siliciclastic reservoirs and significance for their origin： A case study from sandstones of the Triassic Yanchang Formation, southwestern Ordos Basin, China

Early carbonate cements in the Yanchang Formation sandstones are composed mainly of calcite with relatively heavier carbon isotope （their δ^18O values range from -0.3‰- -0.1‰） and lighter oxygen isotope （their δ^18O values range from -22.1‰- -19.5‰）. Generally, they are closely related to the direct precipitation of oversaturated calcium carbonate from alkaline lake water. This kind of cementation plays an important role in enhancing the anti-compaction ability of sandstones, preserving intragranular volume and providing the mass basis for later disso- lution caused by acidic fluid flow to produce secondary porosity. Ferriferous calcites are characterized by relatively light carbon isotope with δ^13C values ranging from -8.02‰ to -3.23‰, and lighter oxygen isotope with δ^18O values ranging from -22.9‰ to -19.7‰, which is obviously related to the decarboxylation of organic matter during the late period of early diagenesis to the early period of late diagenesis. As the mid-late diagenetic products, ferriferous cal- cites in the study area are considered as the characteristic authigenic minerals for indicating large-scaled hydrocarbon influx and migration within the clastic reservoir. The late ankerite is relatively heavy in carbon isotope with δ^13C values ranging from -1.92‰ to -0.84‰, and shows a wide range of variations in oxygen isotopic composition, with δ^18O values ranging from -20.5‰ to -12.6‰. They are believed to have nothing to do with decarboxylation, but the previously formed marine carbonate rock fragments may serve as the chief carbon source for their precipitation, and the alkaline diagenetic environment at the mid-late stage would promote this process.     

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.     

基于SVM的多源遥感影像面向对象建筑物提取方法

在分析支持向量机(Support Vector Machine,SVM)分类技术和机载激光雷达(LIDAR)数据、航空影像特征的基础上,提出了基于SVM的LIDAR数据和航空影像的面向对象建筑物提取方法。结果表明,该方法充分利用了多源影像的互补信息,能够得到更高的信息提取精度,准确而快速地更新地理空间数据库,是一种有效的面向对象建筑物提取方法。     

GIS软件符号功能特点

讨论当前国内外GIS软件的符号功能及花纹图案填充功能的特点,指出实际应用中不足,为现有软件平台进行符号设计、编辑以及制图等提供参考。     

岩石圈中热压系数的计算

中国中西部地区发育众多前陆冲断带,它们具有构造变形复杂、油气潜力大和有别于经典前陆盆地的沉积和油气地质特征,但其成因过程和动力学并不清楚。文中利用中西部盆地区的地温、岩石热物性参数和地热学模拟技术,分析该区岩石圈热状态和流变学特征,进一步结合其他地质、地球物理资料,揭示盆地区的深部构造特征和岩石圈性质。研究表明,中西部各主要盆地的岩石圈具有厚度大、强度高、地温低等热-流变学特征,表现为刚硬块体;而其周缘和造山带区却表现为温度高、强度低和厚度小等特征,是构造变形的易发区。在此基础上讨论了岩石圈性质和变形过程等深部构造对前陆盆地成因演化的控制作用,进而初步归纳这类陆内再生前陆盆地的成因演化机制:发育于小型克拉通块体的边缘,其就位受控于岩石圈热-流变学非均质性和构造继承性,其动力来源是新生代印度-欧亚大陆碰撞及其持续的挤压作用。上述研究为探讨中国中西部地区的前陆盆地成因机制提供了深部资料和岩石圈热-流变学约束。     

基于GIS的人口分布图的绘制研究——以辽阳市为例

主要论述传统的人口分布专题地图方法及其不足,阐述了人口分布与土地利用之间的关系,运用人口在不同用地类型上的分配的理论,模拟人口分布,根据辽阳市的土地利用情况以及人口数字准备来绘制人口分布图。     

编程计算器fx-4850P与fx-5800P的区别与程序转换

fx-4000系列工程机曾在我国测绘与工程建设企业及学校得到广泛应用。2008年3月,卡西欧在全球范围停产fx-4000工程机并推出换代机型fx-5800P后,我国的工程机用户将普遍面临fx-4000机型程序转换为fx-5800P程序的问题。以fx-4850P为例,深入探讨其与fx-5800P程序语言的主要区别与程序转换方法,并用多个案例说明各种程序转换方法的特点。     

河南黄淮平原土壤中Cu的生态安全评价

在分析河南黄淮平原土壤和小麦籽实中Cu含量分布特征的基础上,利用单项污染指数法对研究区小麦籽实中Cu的污染状况进行评价。其结果为：研究区小麦籽实中Cu的单项污染指数Pi的平均值为0．473,说明研究区小麦籽实未受Cu的污染。Cu的状况良好。进一步讨论了土壤中Cu的含量与小麦籽实中Cu含量间的关系。认为小麦籽实中Cu的积累与土壤中的总Cu无明显的相关关系,而与土壤中的有效态Cu含量具有明显的相关性。据此,将土壤有效态Cu作为土壤Cu生态安全评价的指标。并建立了小麦籽实Cu与土壤有效Cu的响应关系模型,确定了土壤中有效Cu的安全界限值。     

高精度GPS形变监测网数据处理的理论与方法

分析了高精度GPS形变监测网数据处理中系统误差的影响,给出了顾及系统误差影响的自由网平差模型;针对粗差在GPS观测数据中存在的广泛性,在对平差模型进行整体性检验的基础上,采用检验方法消除粗差对平差结果的影响;结合抗差估计,对中国地壳运动观测网络工程1999～2003年观测数据进行了处理,验证了模型的精度和可靠性.     

幔源CO_2释出机理、脱气模式及成藏机制研究进展

针对幔源CO2如何从地幔岩浆中脱出并进入沉积地层中形成CO2气藏聚集这一关键问题,总结了国内外研究进展和前缘方向。研究表明,地幔深部的碱性玄武岩浆和碱性岩浆才是深部流体和CO2等挥发份大量赋存、渗滤和释出的场所。浅成侵入岩、次火山岩和火山通道等是CO2释放和聚集的有利位置,岩浆期后和岩浆衰弱期的热液活动阶段是CO2大量释放和聚集的有利时期。幔源CO2进入沉积盆地中具有3种脱气模式,即沿岩石圈断裂直接脱气模式、热流底辟体脱气模式和壳内岩浆房-基底断裂组合脱气模式。CO2的固有物化性质决定其运移相态多样,具有运移和聚集过程同步的特征。只有在满足大量的化学消耗及地层水或原油的溶解和耗散之后才能形成CO2有效聚集。幔源CO2成藏和分布主要受岩浆气源体和气源断裂体系的控制。今后,在超临界CO2及其对油气运移聚集的作用、CO2与深大断裂及火山岩的关系、CO2脱气运移机制、CO与常规烃类油气的耦合差异成藏机制等方面仍需要进一步的研究和探索。