Two-dimensional pH distributions and dynamics in bioturbated marine sediments

The seafloor is the site of intense biogeochemical and mineral dissolution-precipitation reactions which generate strong gradients in pH near the sediment-overlying water interface. These gradients are usually measured in one-dimension vertically with depth. Two-dimensional pH distributions in marine sediments were examined at high resolution (65 × 65 μm pixel) and analytical precision over areas of ∼150 to 225 cm² using a newly developed pH planar fluorosensor. Dramatic three-dimensional gradients, complex heterogeneity, and dynamic changes of pH occur in the surficial zone of deposits inhabited by macrofauna. pH can vary by ±2 units horizontally as well as vertically over millimeter scales. pH minima zones often form in association with redoxclines within a few millimeters of inner burrow walls, and become more pronounced with time if burrows remain stable and irrigated for extended periods. Microenvironmental pH minima also form locally around decaying biomass and relict burrow tracks, and dissipate with time (∼5 d). H⁺ concentrations and fluxes in sandy mud show complex acid-base reaction distributions with net H⁺ fluxes around burrows up to ∼12 nmol cm⁻² d⁻¹ and maximum net reaction rates varying between −90 (consumption) to 120 (production) μM d⁻¹ (∼90 nmol cm⁻¹ d⁻¹ burrow length). Acid producing zones that surround irrigated burrows are largely balanced by acid titration zones along inner burrow walls and outer radial boundaries. The geometry and scaling of pH microenvironments are functions of diagenetic reaction rates and three-dimensional transport patterns determined by sediment properties, such as diffusive tortuosity, and by benthic community characteristics such as the abundance, mobility, and size of infauna. Previously, undocumented biogeochemical phenomena such as low pH regions associated with in-filled relict biogenic structures and burrowing tracks are readily demonstrated by two-dimensional and time-dependent images of pH and sedimentary structure.     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

Dissolved trace elements in river water: spatial distribution and the influencing factor, a study for the Pearl River Delta Economic Zone, China

Twenty-nine water samples were collected from different river channels of the Pearl River Delta Economic Zone, China. An inductively coupled plasma-mass spectromonitor (ICP-MS) was used to measure concentrations of the trace elements in these samples. The results suggest that the average concentrations of rare earth elements in river water show an increasing trend from the West River, the North River, the rivers of the Pearl River Delta, and the Shenzhen River to the East River. Relatively high concentrations of heavy metals appear in the East River, the rivers of the Pearl River Delta and the Shenzhen River, while the West River and the North River have relatively low heavy metal concentrations. Trace element concentrations in samples collected near urban or industrial areas are much higher than those of samples collected from distant areas, away from urban and industrial areas. After natural conditions, human activities have significant influence on the trace element concentrations in river water. This trace element concentration’s spatial distribution in the river water from the Pearl River Delta Economic Zone is actually an integrated effect of natural conditions and human activity.     

Energy transfer among Pb, Ce and Mn in fluorescent calcite from Kuerle, Xinjiang, China

Natural calcite from Kuerle, Xinjiang, China, shows orange-red fluorescence when exposed to short-wave ultraviolet (UV) light (Hg 253.7 nm). Photoluminescence (PL) emission and excitation spectra of the calcite are observed at room temperature in detail. The PL emission spectrum under 208 nm excitation consists of three bands: two UV bands at 325 and 355 nm and an orange-red band at 620 nm. The three bands are ascribed to Pb²⁺, Ce³⁺ and Mn²⁺, respectively, as activators. The Pb²⁺ excitation band is observed at 243 nm, and the Ce³⁺ excitation band at 295 nm. The Pb²⁺ excitation band is also observed by monitoring the Ce³⁺ fluorescence, and the Pb²⁺ and Ce³⁺ excitation bands, in addition to six Mn²⁺ excitation bands, are also observed by monitoring the Mn²⁺ fluorescence. These indicate that four types of the energy transfer can occur in calcite through the following processes: (1) Pb²⁺ → Ce³⁺, (2) Pb²⁺ → Mn²⁺, (3) Ce³⁺ → Mn²⁺ and (4) Pb²⁺ → Ce³⁺ → Mn²⁺.     

REE characteristics of the Fanshan alunite deposit in Zhejiang Province, China

1 Introduction Alunite [KAl3(SO4)2(OH)6] is a very important non-ferrous metal resource, so many countries throughout the world have made great investments in research on the mechanism of its formation, its geological characteristics and applications. O…     

中国岩溶洞穴数据库建设研究

为了有效地保护和利用洞穴这一具有多方面价值的、不可再生的国土资源而建立了中 国岩溶洞穴数据库,首期完成900个洞穴数据建库工作。数据库中含有图、文、声、 像等方面的数字化信息,数据容量2500MB,作为非商业数据,可通过授权共享,为 科研机构、旅游行业和公众提供服务。     

土地利用规划电子政务系统的设计与实现

本文在分析了电子政务的内涵和作用的基础上,阐述了建设土地利用规划电子政务系统的必要性。依据国土资源电子政务系统建设目标和规范,在MapGuide平台上应用办公自动化、GIS、Oracle数据库等技术,确定了系统的总体设计。完成了土地利用规划电子政务系统的建设,实现了规划和国土资源管理的公平、公开、公正和公信,促进了规划和国土资源管理的科学化和规范化,大大提高了土地利用规划工作的效率。     

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.     

岩石复电阻率Dias模型及其参数求取方法

Dias模型是众多描述岩石复电阻率的频散特性模型中的一种,它不但参数少,且可由这些参数导出具有特定物理意义的参数。针对Dias模型参数的求取及反演解的不确定性评价,这里提出了一种模拟退火阻尼最小二乘联合反演方法。该方法首先将参数求解空间离散化,利用模拟退火找到全局最优解区间,然后利用阻尼最小二乘法在解空间进行求解。该方法有效地克服了原来两种方法的反演速度慢、反演结果依赖于初值的缺点,并实现了对反演结果多解性的评价。研究结果表明,对于岩石复电阻率数据的处理解释,Dias模型的使用比传统的Cole模型及其变形更具有潜在的优势。