Velocity profile of a sand cloud blowing over a gravel surface

Particle dynamic analyzer (PDA) measurement technology was used to study the turbulent characteristics and the variation with height of the mean horizontal (in the downwind direction) and vertical (in the upward direction) particle velocity of a sand cloud blowing over a gravel surface. The results show that the mean horizontal particle velocity of the cloud increases with height, while the mean vertical velocity decreases with height. The variation of the mean horizontal velocity with height is, to some extent, similar to the wind profile that increases logarithmically with height in the turbulent boundary layer. The variation of the mean vertical velocity with height is much more complex than that of the mean horizontal velocity. The increase of the resultant mean velocity with height can be expressed by a modified power function. Particle turbulence in the downwind direction decreases with height, while that in the vertical direction is complex. For fine sands (0.2–0.3 mm and 0.3–0.4 mm), there is a tendency for the particle turbulence to increase with height. In the very near-surface layer (<4 mm), the movement of blown sand particles is very complex due to the rebound of particles on the bed and the interparticle collisions in the air. Wind starts to accelerate particle movement about 4 mm from the surface. The initial rebound on the bed and the interparticle collisions in the air have a profound effect on particle movement below that height, where particle concentration is very high and wind velocity is very low.     

基于遥感的黄河三角洲蒸散的动态分析

Evapotranspiration (ET) is an important parameter for water resource management. Compared to the traditional ET computation and measurement methods, the ET computation method based on remote sensing has the advantages of quickness, precision, raster mapping and regional scale. SEBAL, an ET computation model using remote sensing method is based on the surface energy balance equation which is a function of net radiance flux, soil heat flux, sensible heat flux and latent heat flux. The former three fluxes can be computed through the parameters retrieved from remote sensing image, then the latent heat flux can be obtained to provide energy for ET. Finally we can obtain the daily ET. In this study SEBAL was applied to compute ET in the Yellow River Delta of China where water resource faces a rigorous situation. Three Landsat TM images and meteorology data of 1999 were used for ET computation, and spatial and temporal change patterns of ET in the Yellow River Delta were analysed.     

Geology, Geochemistry and Genesis of the Hongshijing Gold Deposit in Ruoqiang,Xinjiang

1IntroductionTheHongshijinggolddepositislocatedinthenorthofLuobupouLakeofRuoqiang ,about 30 0kmsouthwestofHamiCity ,Xinjiang .ItwasdiscoveredbytheSixthGeologicalTeamofXinjiangduringgeo chemicalexploration .TheHongshijinggolddeposit,whichoccursinthegold bearingformationcomposedofMiddleandLateCarboniferousvolcanicandpyroclasticrocks ,isabrittle ductileshearzonetypegolddepositcontrolledbyariftbelt.TheHongshijinggolddepositislocatedinthesouthwestoftheHongshi jing -Maotoushanmineralizationb…     

碳酸盐岩潜山储层垂向分带及油气藏流体分布规律

从古岩溶形成的基本条件出发，提出可溶性岩石和具溶蚀性的流动水是岩溶发育的基本条件，古岩溶与古风化壳常共生．受储层结构的非均质性、构造圈闭分割性、流体分布不完善性及高地温场等因素影响，流体在古潜山奥陶系储层的分布很复杂，孔、洞、缝发育程度及搭配好坏是决定油气产量的核心，圈闭条件与流体分布也密切相关．     

岩石受压破裂的ULF和LF电磁前兆信号

实验观测到了4类岩性、18块样品在单轴压力下直至破裂发生全过程中的ULF和LF电磁前兆信号。这些不同频率的信号是零散出现的，其形态为一组组脉冲，宽度为4ms～16ms，幅度为0．1mV～1．4mV。实验发现具同一谐振频率的天线收到的信号频次与其相对于裂缝的位置和方位有关。结果还表明，电磁前兆信号的频度与岩样强度有关，抗压强度高的岩样电磁前兆信号多。微破裂可能产生了偶电层，在破裂过程中向外辐射，产生了LF频段的磁信号，ULF磁信号则主要由压磁效应产生。     

利用Windows 2000构造上海市地震局虚拟专用网

利用Windows2000中的Point—to—Point Tunneling Protocol(PPTP)协议和Microsoft ISA Server防火墙实现上海市地震局局内财务小网与局域网之间的安全互联、局中心与各区县地震办公室以及远程移动用户之间的可靠VNP连接。     

Active blocks and strong seismic activity in North China region

The active North China block consists of three second-order blocks: Ordos, North China Plain, and East Shandong-Huanghai Sea blocks. Two active tectonic zones, the Anyang-Heze-Linyi and Tangshan-Cixian zones, exist in the active North China Plain block and have separated the active block into 3 third-order active blocks, Taihangshan, Hebei-Shandong, and Henan-Huai blocks. The 3 third-order active blocks are characterized by their entire motion and are clearly different in their Cenozoic structures and deep structures. The active boundary tectonic zones between the third-order active blocks are less than those between the first- and second-order active blocks in their movement strength, extent, and seismic activity. The density of M· ·6 earthquakes in the boundary zones between active blocks is higher than that within the blocks by 9–22 times in the North China region, up to one order of magnitude on average. M· · 7 earthquakes occurred basically in the boundary zones between active blocks. The difference is not occasional, but reflects the nature of intraplate movement and the characteristics of strong seismic activity and is the powerful evidence for hypothesis of active blocks.     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.     

Absence of Archean basement in the South Kunlun Block: Nd-Sr-O isotopic evidence from granitoids

Abstract   The West Kunlun mountain range along the northwestern margin of the Tibetan Plateau is crucial in understanding the early tectonic history of the region. It can be divided into the North and South Kunlun Blocks, of which the former is considered to be part of the Tarim Craton, whereas consensus was not reached on the nature and origin of the South Kunlun Block. Samples were collected from the 471 Ma Yirba Pluton, the 405 Ma North Kudi Pluton and the 214 Ma Arkarz Shan Intrusive Complex. These granitoids cover approximately 60% of the Kudi area in the South Kunlun Block. Sr, Nd, and O isotope compositions preclude significant involvement of mantle-derived magma in the genesis of these granitoids; therefore, they can be used to decipher the nature of lower–mid crust in the area. All samples give Mesoproterozoic Nd model ages (1.1–1.5 Ga) similar to those of the exposed metamorphic complex of this block but significantly different from those of the basement of the North Kunlun Block (2.8 Ga). This indicates that the South Kunlun Block does not have an Archean basement, and, thus, does not support the microcontinent model that suggests the South Kunlun Block was a microcontinent once separated from and later collided back with the North Kunlun Block.