Migration Fractionation of Neutral Nitrogen Compounds of Crude Oils from Tabei Oilfield in the Tarim Basin, China

The absolute amounts and relative distributions of neutral nitrogen compounds in the Tabei oilfield (e. G. Blocks Ln1-Ln1 1) showed remarkable migration fractionation in the vertical direction. From Ordovician reservoirs (O) to oil legs TⅢ and T Ⅰ of Triassic reservoirs in blocks LN1-LN11, the concentrations of [a] [c] decreased from 1. 59μg/g, 0.49μg/g to 0.17 μg/g (oil). The ratios of various alkylcarbazole isomers, such as 1,8-dimethylcarbazole/nitrogenpartially shielded isomers and 1,8-dimethylcarbazole/nitrogen-exposed isomers, were adopted as the indicators of petroleum migration. The ratios increased from 0.13, 0.20 to 0.67 and from going from the south to the north of the Tabei oilfield, the absolute concentrations of neutral nitrogen compounds decreased drastically, and the nitrogen-shielded isomers were enriched relative to nitrogen-exposed isomers and nitrogen-partially shielded isomers. Crude oils in the Tabei oilfield migrated laterally from the Jilake structure to the Sangtamu fault uplift and Lunnan fault uplift, and crude oils in the same fault uplift migrated and remigrated vertically from Ordovician reservoirs, to oil legs TⅢ to TⅠ of Triassic reservoirs.     

煤内生裂隙的成因

根据多年对煤层裂隙的几何形态、分布规律、性质、与煤层的组合关系等的研究，认为煤内生裂隙是在煤化作用过程中，由于脱水、脱挥发分、煤体积收缩作用产生或者是由于煤化作用生成的水、气体及温度升高，孔隙产生膨胀，形成异常高压产生的；裂隙的发育方向因受区域应力场的控制，区域上具有一致性，且走向与最大主应力方向一致；内生裂隙属于张性裂隙。     

Typical basin-fill sequences and basin migration in Yanshan, North China--Response to Mesozoic tectonic transition

Basin-fill sequences of Mesozoic typical basins in the Yanshan area, North China may be divided into four phases, reflecting lithosphere tectonic evolution from flexure (T3), flexure with weak rifting (J1+2), tectonic transition (J3), and rifting (K). Except the first phase, the other three phases all start with lava and volcaniclastic rocks, and end with thick coarse clastic rocks and/or conglomerates, showing cyclic basin development rather than simple cyclic rift mechanism and disciplinary basin-stress change from extension to compression in each phase. Prototype basin analysis, based on basin-fill sequences, paleocurrent distribution and depositional systems, shows that single basin-strike and structural-line direction controlling basin development had evidently changed from east-west to northeast in Late Jurassic in the Yanshan area, although basin group still occurred in east-west zonal distribution. Till Early Cretaceous, main structural-line strike controlling basins just turned to northeast by north in the studied area.     

Vicissitude of Sogo Nur and environmental-climatic change during last 1500 years

Lakes in arid zone are sensitive to climatic changes. The lacustrine sediment sequence in Sogo Nur has well and truly recorded climatic events such as the Sui-Tang Dynasty Warm Period, the Song-Liao Dynasty Cold Period, the Medieval Warm Period, the Little Ice Age and the 20th Century Warm Period. Commonly, the climate in warm Periods was relatively humid,accordingly the lake area extended and water level rose, and vice versa. Apart from climatic change, human activity is also an important factor of influencing lake vicissitude, and they played the dominant role alternatively during different periods; the factor of climatic change predominated in historical period, while since the beginning of the 20th century the utilization of water resources by human has became decisive.     

Mesozoic basin evolution and tectonic mechanism in Yanshan, China

The Mesozoic basins in Yanshan, China underwent several important tectonic transformations, including changes from a pre-Late Triassic marginal cratonic basin to a Late Triassic-Late Jurassic flexural basin and then to a late Late Jurassic-Early Cretaceous rift basin. In response to two violent intraplate deformation at Late Triassic and Late Jurassic, coarse fluvial depositional systems in Xingshikou and Tuchengzi Formations were deposited in front of thrust belts. Controlled by transform and extension faulting, fan deltas and lacustrine systems were deposited in Early Cretaceous basins. The composition of clastic debris in Late Triassic and Late Jurassic flexural basins respectively represents unroofing processes from Proterozoic to Archean and from early deposited, overlying pyroclastic rocks to basement rocks in provenance areas. Restored protobasins were gradually migrated toward nearly NEE to EW-trending from Early Jurassic to early Late Jurassic. The Early Cretaceous basins with a NNE-trending crossed over early-formed basins. The Early-Late Jurassic and Early Cretaceous basins were respectively controlled by different tectonic mechanisms.     

The influence of thermochemical convection on the fixity of mantle plumes

A general feature of both isochemical and thermochemical studies of mantle convection is that horizontal plume velocities tend to be smaller than typical convective velocities, however, it is not clear which system leads to a greater fixity of mantle plumes. We perform two- and three-dimensional numerical calculations and compare both thermochemical and isochemical cases with similar convective vigor to determine whether presence of a dense component in the mantle can lead to smaller ratios of horizontal plume velocity to surface velocity. We investigate different viscosity and density contrasts between chemical components in the thermochemical calculations, and we perform isochemical calculations with both free-slip and no-slip bottom boundary conditions. We then compare both visually and quantitatively the results of the thermochemical and isochemical calculations to determine which leads to greater plume fixity. We find that horizontal plume velocities for thermochemical calculations are similar to those from isochemical calculations with no-slip bottom boundary conditions. In addition, we find that plumes tend to be more fixed for isochemical cases with free-slip bottom boundary conditions for two-dimensional calculations, however, in three dimensions, we find that plume fixity is similar to that observed in thermochemical calculations.     

New palaeointensity results from Cretaceous basalt of Inner Mongolia, China

We present new Thellier-Thellier palaeointensity results from three cooling units (32 samples) of Inner Mongolia lava flows (91.7 Ma) emplaced during the Cretaceous Normal Superchron (CNS). Based on rock-magnetic and microscopy observations the magneto-mineralogy of all samples is determined to be primary and unaltered high-Ti titanomagnetite. Accepted palaeointensity determinations, obtained in the 80-200 °C temperature interval, are of good technical quality with positive standard partial thermoremanent magnetisation (pTRM) checks and pTRM-tail checks. Obtained palaeointensity estimates range from 14.7 to 28.0 μT, with virtual axial dipole moments (VADM) of 2.4 to 4.6 (× 10²² Am²). The data agree well with recently published results from the same region and, combining the two datasets, we obtain independent estimates from six different cooling units yielding a time-averaged VADM of 3.2 ± 1.6 (× 10²² Am²). These data suggest a relatively low dipole moment towards the end of the Cretaceous Normal Superchron.     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.     

1998年南海夏季风爆发前后区域动能收支研究

利用1998年南海季风试验(SCSMEX)资料和区域动能收支方程，对南海南部和北部两个区域该年夏季风爆发前后的区域总动能和区域扰动动能收支进行了诊断分析。结果表明，南海北区夏季风爆发前后动能主要在高层制造，大部分动能被摩擦消耗，南区夏季风爆发前后动能主要在高层被破坏，摩擦项充当动能源。扰动动能主要在高层和部分在低层制造。在此期间，南海地区一直向邻近区域输出动能。     

2002年6月13日重庆区域大暴雨分析

通过对重庆西部“6 1 3”区域大暴雨的分析 ,发现此次天气过程是一次典型的高原涡与西南涡耦合 ,结合地面弱冷空气条件下产生的 ,同时对ECMWF和T2 1 3数值预报产品进行了简要的分析 ,发现ECMWF和T2 1 3的形势预报能力都比较好 ,但T2 1 3的部分物理量要素和降水量预报能力还有待提高。