Formation blockage risk analysis of geothermal water reinjection:Rock property analysis,pumping and reinjection tests,and long-term reinjection prediction

The blockage induced by particle migration and deposition is one of the main reasons for the decrease of reinjection capacity in the porous geothermal reservoir with a low and medium temperature.In this paper,a new drilled geothermal well in Xining basin China is taken as an example to investigate the formation blockage risk due to the movable clay and sand particles in pores.The physical properties of the reservoir rocks were analyzed,a series of pumping and reinjection tests were conducted,and the longterm reinjection performance of the well was predicted by numerical simulation based on the test fitting.The results show that the geothermal reservoir rocks are argillaceous and weakly cemented sandstones with a content of movable clay and sand particles up to 0.18–23.42 wt.%.The well presented a high productivity of 935–2186 m3?d-1 at a pressure difference of 0.7–1.62 MPa in the pumping tests associated with a large amount of clay and sand particles produced out,while in the reinjection test,only a low injectivity of 240–480 m3?d-1 was observed at an injection pressure of 0.2–0.6 MPa with the clay and sand particles near the wellbore move into deep.According to the prediction,under conditions of a blockage risk,the injectivity of the well will start to decline after 100 days of injection,and in the third year,it will decrease by 59.00%–77.09%.The influence of invasion of pretreated suspended particles and scale particles can be neglected.Under conditions of a high blockage risk,the injectivity of the well will decrease significantly in the first 20–30 days,with a decline of 75.39%–78.96%.Generally,the higher the injection pressure or rate,the greater the decrease in injectivity of the well caused by particle blockage.Pump lifting is an effective measure to remove the well blockage which can be used regularly.     

The relationship between extension of lower crust and displacement of the shelf break

With deep sea petroleum explorations become more and more popular,some geological phenomena have emerged:extension of lower crust and upper crust is inhomogeneous;shelf break has been moved rapidly after crustal stretching.These geological phenomena are important to the continental margin evolution.To investigate the thinning of the whole crust and the contribution of the upper crust versus the lower crust to the crustal stretching since the Cenozoic,we calculated the stretching factors of the upper and the lower crust based on the 13 seismic lines in the Baiyun Sag from CNOOC.The results indicated that the whole crustal thickness decreases seaward while the whole crustal stretching factor increases from shelf to slope.Our calculations showed that the lower crustal stretching factor is higher than that of the upper crust in the Baiyun Sag.In the Cenozoic,deformation of the Baiyun Sag is controlled mainly by ductile shearing rather than brittle shearing.Based on the numerical modeling,we can conclude the initial crust in the Baiyun Sag is thermally attenuated.The stretching factor(β)of the lower crust increases from the north to the south of the continental margin,indicating two stretching centers:the Baiyun Sag and the Liwan Sag.The geometry of the shelf break and theβisoline trap have the similar trend in 23.8 and 13.8 Ma,both located in the intense deforming zone of the lower crust,and therefore we conclude the stretching and flowing of the lower crust cause the displacement of the shelf break before and after 23.8 Ma.     

利用最小二乘配置识别川滇地区跨断层形变异常的研究

将最小二乘配置方法的高斯型经验协方差函数模型应用于区域跨断层形变曲线的异常辅助识别。通过川滇地区跨断层形变对芦山7.0级、康定6.3级、鲁甸6.5级等地震的前兆异常判定曲线,说明最小二乘配置内插拟合可以进行区域跨断层水准形变曲线的趋势模拟和辅助查找区间异常特征,对于跨断层形变曲线异常识别有一定意义。     

纳米铁去除饮用水中As(Ⅲ)和As(Ⅴ)

在好氧水体中,As(Ⅲ)比As(Ⅴ)更易迁移,而且在水处理过程中去除效率更低。在实验室合成制得BET比表面积为49.16 m2/g,直径范围为20~40 nm的纳米铁。通过批试验考察纳米铁对As(Ⅲ)和As(Ⅴ)去除能力及其反应动力学情况。结果表明,在pH为7,温度20℃时纳米铁能够快速地去除As(Ⅲ)和As(Ⅴ),在60 m in内,0.25 g纳米铁对起始浓度为968.6μg/L As(Ⅲ)和828.9μg/L As(Ⅴ)的去除率大于99.5%。反应遵循准一级反应动力学方程,标准化后的As(Ⅲ)和As(Ⅴ)比表面积速率常数kSA分别为1.30 mL/(m2.m in)和1.64 mL/(m2.m in)。由实验结果可知,具有高反应活性的纳米铁是用于含砷饮用水处理非常有效的吸附材料。     

针对8051芯片RSA算法的选择明文SPA攻击

针对随机数据作明文时,8051芯片RSA算法功耗曲线轮间差异不明显,提出采用特殊数据(如N-1,R-1等)作为明文,可获得功耗差异比较明显的曲线。验证真实环境下采用特殊数据作明文对8051芯片RSA算法进行SPA攻击,可以降低8051芯片密钥的破解难度,提高其功耗曲线攻击效率。最后,根据实验结果提出了提高智能卡安全的防御方法。     

Mapping of Regional Soil Salinities in Xinjiang and Strategies for Amelioration and Management

Information on the spatial distribution of soil salinity can be used as guidance in avoiding the continued degradation of land and water resources by better informing policy makers. However, most regional soil-salinity maps are produced through a conventional direct-linking method derived from historic observations. Such maps lack spatial details and are limited in describing the evolution of soil salinization in particular instances. To overcome these limitations, we employed a method that included an integrative hierarchical-sampling strategy(IHSS) and the Soil Land Inference Model(So LIM) to map soil salinity over a regional area. A fuzzy c-means(FCM) classifier is performed to generate three measures, comprising representative grade, representative area, and representative level(membership). IHSS employs these three measures to ascertain how many representative samples are appropriate. Through this synergetic assessment, representative samples are obtained and their soil-salinity values are measured. These samples are input to So LIM, which is constructed based on fuzzy logic, to calculate the soil-forming environmental similarities between representative samples and other locations. Finally, a detailed soil-salinity map is produced through an averaging function that is linearly weighted, which is used to integrate the soil salinity value and soil similarity. This case study, in the Uyghur Autonomous Region of Xinjiang of China, demonstrates that the employed method can produce soil salinity map at a higher level of spatial detail and accuracy. Twenty-three representative points are determined. The results show that 1) the prediction is appropriate in Kuqa Oasis(R2 = 0.70, RPD = 1.55, RMSE = 12.86) and Keriya Oasis(R2 = 0.75, RPD = 1.66, RMSE = 10.92), that in Fubei Oasis(R2 = 0.77, RPD = 2.01, RMSE = 6.32) perform little better than in those two oases, according to the evaluation criterion. 2) Based on all validation samples from three oases, accuracy estimation show the employed method(R2 = 0.74, RPD = 1.67, RMSE = 11.18) performed better than the multiple linear regression model(R2 = 0.60, RPD = 1.47, RMSE = 14.45). 3) The statistical result show that approximately half(48.07%) of the study area has changed to salt-affected soil, mainly distributed in downstream of oases, around lakes, on both sides of rivers and more serious in the southern than the northern Xinjiang. To deal with this issue, a couple of strategies involving soil-salinity monitoring, water management, and plant diversification are proposed, to reduce soil salinization. Finally, this study concludes that the employed method can serve as an alternative model for soil-salinity mapping on a large scale.     

威海市近海海域浅地层结构及灾害地质特征

通过对2 131km高分辨率浅地层剖面资料分析和研究,揭示了威海市近海海域浅地层结构特征,分析了海洋灾害地质因素类型及分布特征,并绘制了主要灾害地质因素分布图。威海市近海海域65m以浅地层共分为5层,第一层为全新世泥质楔形体,地层厚度8~15m;第二层为末次盛冰期以来的海侵层,厚度一般小于3m;第三层为MIS2期的陆相沉积层,地层厚度3~8m;第四层为MIS3期的海相沉积层,厚度3~6m;第五层未完全揭示。近海海域灾害地质因素主要包括埋藏下切谷、浅部断层、浅层气、海底沙波沙脊、浅埋起伏基岩等5种类型;埋藏下切谷主要分布在南部海域U3地层单元中;浅部断层主要分布在南部海域水深大于20m的海底堆积平原;浅层气主要分布在北部海域,东部和南部海域面积较小;海底沙波沙脊主要分布在荣成成山头外海海域;浅埋起伏基岩主要分布在基岩海岸和岛屿较近的海域。     

基于时空特征分析技术的烤烟GIS系统

本文分析了烤烟信息系统对烤烟种植、生产和销售的重要作用,构建系统的必要性和应用需求,并在.NET框架下,利用ArcEngine和ArcSDE,以C/S结构实现该系统。介绍了系统的结构和功能:包括地图服务、烤烟信息查询统计和烤烟地理信息时空分析和决策支持。同时,讨论了实现该系统的关键技术,包括时空数据库、时空序列的烤烟时空事件分析模型、Web服务等。时空数据包括业务数据和行政区数据两类,对于行政区,除了需要记录行政区的生命周期外,还需记录行政区变更事件,通过行政区变更事件表查询行政区撤消、合并等事件后的业务数据,进而实现时空分析。系统的实现对促进烤烟生产信息化有重积极意义。     

面向高分遥感影像道路提取的轻量级双注意力和特征补偿残差网络模型

针对高分辨率遥感影像背景复杂,道路提取容易受阴影、建筑物和铁路等背景信息干扰的问题,提出一种带有轻量级双注意力和特征补偿机制的DAFCResUnet模型。该模型在ResUnet的基础上,通过增加轻量级的双注意力和特征补偿模块实现模型在性能和时空复杂度上的平衡。其中,双注意力模块可以增强模型的特征提取能力,特征补偿模块可以融合网络中来自深浅层的道路特征。在DeepGlobe和GF-2道路数据集上的实验结果表明,DAFCResUnet模型的IoU和F1-score可以达到0.6713、0.8033和0.7402、0.8507,模型的整体精度优于U-Net、ResUnet和VNet模型。与U-Net和ResUnet模型相比,DAFCResUnet模型仅增加了少量的计算量和参数量,但IoU和F1-score均有较大幅度的提高;与VNet模型相比,DAFCResUnet模型在计算量和参数量远低于VNet的情况下取得了更高的精度,模型在精度和时空复杂度两方面均有优势。相比其他对比模型,DAFCResUnet模型具有更强的特征提取和抗干扰能力,能更好解决道路上的干扰物、与道路特征相似地物、树荫或阴影...     

弹性波正演模拟中PML吸收边界条件的改进

在弹性波有限差分正演模拟中, 完全匹配层(PML) 吸收边界条件是使用广泛、吸收效果最好的吸收边界条件.在目前的两种PML实现方法中, 分裂形式的完全匹配层(SPML) 方法计算存储量大、编程实现复杂; 非分裂形式的完全匹配层(NPML) 方法计算效率低、计算过程复杂.针对传统PML吸收边界条件在实现过程中存在的问题, 推导出了一种简洁有效的非卷积实现的NPML吸收边界条件, 既不需要对场分量进行分裂, 也不需要做复杂的卷积运算.分析结果表明, 本文实现的NPML吸收边界条件不仅具有良好的吸收衰减性能, 而且计算方程简单, 编程实现容易, 占有内存更小.