Silicon isotope fractionation in bamboo and its significance to the biogeochemical cycle of silicon

A systematic investigation on silica contents and silicon isotope compositions of bamboos was undertaken. Seven bamboo plants and related soils were collected from seven locations in China. The roots, stem, branch and leaves for each plant were sampled and their silica contents and silicon isotope compositions were determined. The silica contents and silicon isotope compositions of bulk and water-soluble fraction of soils were also measured. The silica contents of studied bamboo organs vary from 0.30% to 9.95%. Within bamboo plant the silica contents show an increasing trend from stem, through branch, to leaves. In bamboo roots the silica is exclusively in the endodermis cells, but in stem, branch and leaves, the silica is accumulated mainly in epidermal cells. The silicon isotope compositions of bamboos exhibit significant variation, from −2.3‰ to 1.8‰, and large and systematic silicon isotope fractionation was observed within each bamboo. The δ³⁰Si values decrease from roots to stem, but then increase from stem, through branch, to leaves. The ranges of δ³⁰Si values within each bamboo vary from 1.0‰ to 3.3‰. Considering the total range of silicon isotope composition in terrestrial samples is only 7‰, the observed silicon isotope variation in single bamboo is significant and remarkable. This kind of silicon isotope variation might be caused by isotope fractionation in a Rayleigh process when SiO₂ precipitated in stem, branches and leaves gradually from plant fluid. In this process the Si isotope fractionation factor between dissolved Si and precipitated Si in bamboo (α_pre-sol) is estimated to be 0.9981. However, other factors should be considered to explain the decrease of δ³⁰Si value from roots to stem, including larger ratio of dissolved H₄SiO₄ to precipitated SiO₂ in roots than in stem. There is a positive correlation between the δ³⁰Si values of water-soluble fractions in soils and those of bulk bamboos, indicating that the dissolved silicon in pore water and phytoliths in soil is the direct sources of silicon taken up by bamboo roots. A biochemical silicon isotope fractionation exists in process of silicon uptake by bamboo roots. Its silicon isotope fractionation factor (α_bam-wa) is estimated to be 0.9988. Considering the distribution patterns of SiO₂ contents and δ³⁰Si values among different bamboo organs, evapotranspiration may be the driving force for an upward flow of a silicon-bearing fluid and silica precipitation. Passive silicon uptake and transportation may be important for bamboo, although the role of active uptake of silicic acid by roots may not be neglected. The samples with relatively high δ³⁰Si values all grew in soils showing high content of organic materials. In contrast, the samples with relatively low δ³⁰Si values all grew in soil showing low content of organic materials. The silicon isotope composition of bamboo may reflect the local soil type and growth conditions. Our study suggests that bamboos may play an important role in global silicon cycle.     

Experimental investigation on thermochemical sulfate reduction by H2S initiation

Hydrogen sulfide (H₂S) is known to catalyze thermochemical sulfate reduction (TSR) by hydrocarbons (HC), but the reaction mechanism remains unclear. To understand the mechanism of this catalytic reaction, a series of isothermal gold-tube hydrous pyrolysis experiments were conducted at 330 °C for 24 h under a constant confining pressure of 24.1 MPa. The reactants used were saturated HC (sulfur-free) and CaSO₄ in the presence of variable H₂S partial pressures at three different pH conditions. The experimental results showed that the in-situ pH of the aqueous solution (herein, in-situ pH refers to the calculated pH of aqueous solution under the experimental conditions) can significantly affect the rate of the TSR reaction. A substantial increase in the TSR reaction rate was recorded with a decrease in the in-situ pH value of the aqueous solution involved. A positive correlation between the rate of TSR and the initial partial pressure of H₂S occurred under acidic conditions (at pH ∼3-3.5). However, sulfate reduction at pH ∼5.0 was undetectable even at high initial H₂S concentrations. To investigate whether the reaction of H₂S_(aq) and occurs at pH ∼3, an additional series of isothermal hydrous pyrolysis experiments was conducted with CaSO₄ and variable H₂S partial pressures in the absence of HC at the same experimental temperature and pressure conditions. CaSO₄ reduction was not measurable in the absence of paraffin even with high H₂S pressure and acidic conditions. These experimental observations indicate that the formation of organosulfur intermediates from H₂S reacting with hydrocarbons may play a significant role in sulfate reduction under our experimental conditions rather than the formation of elemental sulfur from H₂S reacting with sulfate as has been suggested previously (Toland W. G. (1960) Oxidation of organic compounds with aqueous sulphate. J. Am. Chem. Soc.82, 1911-1916).Quantification of labile organosulfur compounds (LSC), such as thiols and sulfides, was performed on the products of the reaction of H₂S and HC from a series of gold-tube non-isothermal hydrous pyrolysis experiments conducted at about pH 3 from 300 to 370 °C and a 0.1-°C/h heating rate. Incorporation of sulfur into HC resulted in an appreciable amount of thiol and sulfide formation. The rate of LSC formation positively correlated with the initial H₂S pressure. Thus, we propose that the LSC produced from H₂S reaction with HC are most likely the reactive intermediates for H₂S initiation of sulfate reduction. We further propose a three-step reaction scheme of sulfate reduction by HC under reservoir conditions, and discuss the geological implications of our experimental findings with regard to the effect of formation water and oil chemistry, in particular LSC content.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

The age of the Nantuo Formation and Nantuo glaciation in South China

A U–Pb sensitive high‐resolution ion microprobe (SHRIMP) age of 654.5 ± 3.8 Ma from an ash bed immediately below the Nantuo Formation in South China provides the lowest age constraint for the Nantuo glaciation, which has been correlated with the global ‘Marinoan’ glaciation. A U–Pb SHRIMP age of 636.3 ± 4.9 Ma from a fallout tuff within the basal layer of the Nantuo Formation, along with the existing age of 635.2 ± 0.6 Ma from its overlying Doushantuo cap carbonate, suggests that the traditionally defined Nantuo Formation may have been deposited in a short time period at the end of the Nantuo glaciation. In combination with available ages globally, the data support a relatively short duration and rapid termination of ‘Marinoan’ glaciations.     

双液静压注浆在丰沙线35号桥卵漂石地层的应用

在丰沙线35号桥加固工程的4、5号墩钻孔灌注桩施工中,采用回转滚刀钻进卵漂石地层,为确保孔壁稳定,对桩孔壁进行了双液注浆.在注浆孔成孔、压浆管安放、孔口架桥封堵及双液压浆过程中遇到了较多棘手问题,经施工现场多次试验和改进,解决了双液浓度及注入配比、架桥封堵孔口、双液分离注浆、窜浆处理和合理压浆量控制等技术难题,并取得了理想的注浆效果,确保了钻孔灌注桩顺利进行.     

西秦岭熊山沟岩体地球化学及构造环境分析

在区域地质调查及综合研究的基础上,对位于西秦岭天水东南部地区的原百花岩体进行了详细的岩石学、岩石地球化学、岩体接触关系、同位素年龄研究,从中解体出熊山沟岩体,并初步了解了该岩体的岩浆活动规律。熊山沟岩体早期岩石类型为斜长花岗岩,岩石化学成分K2O含量较低,K2O∕Na2O比值为0.33～0.42;晚期岩石类型为二长花岗岩,岩石相对富集K2O,K2O∕Na2O比值为1.01～1.43,岩石属拉斑-钙碱性系列;微量元素富集Th、Hf、Nb、Zr等元素;稀土元素以富集轻稀土,无铕负异常或铕负异常不明显为主要特征;氧同位素值较低（δ^18O为＋3.32‰）,岩石具Ⅰ型花岗岩的特征,岩浆来源于下地壳物质,形成于大陆弧构造环境。     

岩石破坏前后曲线分类及脆-延转换围压研究——蚀变岩常规三轴压缩试验Ⅰ

蚀变岩是工程中少见的软弱岩类,在西南某重大水电工程中,蚀变岩处于工程的重要部位,为保证工程的长期稳定性,对蚀变岩力学特性进行了深入全面的试验研究.通过对孔隙度不同的饱水蚀变岩进行系统的常规三轴压缩试验和总结分析,提出了蚀变岩三轴压缩下破坏前应力.应变曲线可分为3大类,破坏后应力-应变曲线亦可分为3大类的形态模式.并得出结论:蚀变岩的破坏类型受围压与孔隙度的共同影响,在给定的12 MPa围压下蚀变岩以脆性破坏为主,只有孔隙度大于16%且围压大于4 MPa时才有可能进入脆-延转换状态,且脆-延转换围压随孔隙度增加而降低,临界状态应力比随孔隙度增大而增加.     

分光光度法测定海洋河弧菌510脂多糖

本文研究了直接测定海洋河弧菌 (vibrio fluvailis) 5 10脂多糖的分光光度法。利用 1,9-二甲基亚甲蓝 (DMB) ,在适当条件下同脂多糖发生染色反应 ,在 5 5 0 nm波长下 ,反应体系的吸光值同脂多糖含量呈线性相关。相关系数为 0 .9993,最低检出限为 10 μg/m L,相对标准偏差为 1.6 2 ,平均回收率为 (10 5± 2 .18) %。     

中国对虾血细胞酶细胞化学的初步研究

运用电镜酶细胞化学技术 ,对中国对虾 (Penaeus chinensis)的血细胞和血清中的酚氧化酶、酸性磷酸酶、碱性磷酸酶和过氧化物酶的酶活性部位进行标记。实验结果显示 :酚氧化酶主要以酶原形式存在于大颗粒细胞的颗粒体中 ,酸性磷酸酶和碱性磷酸酶以酶原形式存在于小颗粒细胞的颗粒体中。健康虾和患病虾血细胞中酶活性的表现形式不尽相同 ,在病理情况下 ,颗粒细胞能以细胞解体的方式 ,排出细胞内的颗粒 ,转化成有活性的酶 ,以此提高血淋巴中这几种酶的活性。透明细胞可以吞噬排放颗粒后的颗粒细胞 ,透明细胞中由高尔基体合成的酸性磷酸酶等溶酶体酶主要用于透明细胞的细胞内消化作用。研究认为 :3种血细胞因含有不同的免疫酶以及酶的作用方式不同而具有不同的免疫功能     

大菱鲆幼鱼视网膜结构及不同光谱下视蛋白基因表达特征的研究

大菱鲆(Scophthalmus maximus)是中国重要的养殖鱼类之一, 其生活史经历不同的栖息地和光环境, 视觉器官结构及视觉功能也具有适应性发育特征和可塑性。本研究以不同发育阶段的大菱鲆幼鱼为对象, 探究了其视网膜结构变化、视蛋白基因的表达特征及其与光谱之间的关系。结果表明, 随着大菱鲆幼鱼的生长发育, 其视网膜的外核层逐渐变厚; 视锥视杆层的厚度变化不明显; 而内核层与神经节细胞层逐渐变薄。视紫红质基因rh1与视蛋白基因总表达量的比例上升, 由2月龄的57.35%上升到9月龄77.19%; 视锥蛋白基因与视蛋白基因总表达量的比例下降; 其中红视蛋白基因lws 由2月龄的4.49%下降至9月龄的0.13%。将7月龄的大菱鲆幼鱼用不同光谱处理75 d后, 其视蛋白基因的表达会随光谱环境的变化而发生改变。与全光谱相比, rh2b1、sws2、sws1在红、黄光下的表达量显著下降, 而rh2b1在蓝、绿光下表达显著上升、sws2在绿光下表达显著上升, 其他则变化不显著(P<0.05)。黄、绿、蓝及全光谱下rh2基因家族与视蛋白基因总表达量的比例最高, 而红光下基因rh1的表达量占比最高。大菱鲆幼鱼在不同阶段以及不同光谱处理下表现出了视蛋白基因表达的可塑性以适应不同水层的光谱环境。本研究为探究大菱鲆对光环境的适应机制及工厂化养殖光照调控技术的建立提供理论参考。