Morphology of Shatsky Rise oceanic plateau from high resolution bathymetry

Newly collected, high resolution multi-beam sonar data are combined with previous bathymetry data to produce an improved bathymetric map of Shatsky Rise oceanic plateau. Bathymetry data show that two massifs within Shatsky Rise are immense central volcanoes with gentle flank slopes declining from a central summit. Tamu Massif is a slightly elongated, dome-like volcanic edifice; Ori Massif is square shaped and smaller in area. Several down-to-basin normal faults are observed on the western flank of the massifs but they do not parallel the magnetic lineations, indicating that these faults are probably not related to spreading ridge faulting. Moreover, the faults are observed only on one side of the massifs, which is contrary to expectations from a mechanism of differential subsidence around the massif center. Multi-beam data show many small secondary cones with different shapes and sizes that are widely-distributed on Shatsky Rise massifs, which imply small late-stage magma sources scattered across the surface of the volcanoes in the form of lava flows or explosive volcanism. Erosional channels occur on the flanks of Shatsky Rise volcanoes due to mass wasting and display evidence of down-slope sediment movement. These channels are likely formed by sediments spalling off the edges of summit sediment cap.     

The potential hydrothermal systems unexplored in the Southwest Indian Ocean

Deep-sea hydrothermal vents possess complex ecosystems and abundant metallic mineral deposits valuable to human being. On-axial vents along tectonic plate boundaries have achieved prominent results and obtained huge resources, while nearly 90% of the global mid-ocean ridge and the majority of the off-axial vents buried by thick oceanic sediments within plates remain as relatively undiscovered domains. Based on previous detailed investigations, hydrothermal vents have been mapped along five sections along the Southwest Indian Ridge (SWIR) with different bathymetry, spreading rates, and gravity features, two at the western end (10°–16°E Section B and 16°–25°E Section C) and three at the eastern end (49°–52°E Section D, 52°–61°E Section E and 61°–70°E Section F). Hydrothermal vents along the Sections B, C, E and F with thin oceanic crust are hosted by ultramafic rocks under tectonic-controlled magmatic-starved settings, and hydrothermal vents along the Section D are associated with exceed magmatism. Limited coverage of investigations is provided along the 35°–47°E SWIR (between Marion and Indomed fracture zones) and a lot of research has been done around the Bouvet Island, while no hydrothermal vents has been reported. Analyzing bathymetry, gravity and geochemical data, magmatism settings are favourable for the occurrence of hydrothermal systems along these two sections. An off-axial hydrothermal system in the southern flank of the SWIR that exhibits ultra-thin oceanic crust associated with an oceanic continental transition is postulated to exist along the 100-Ma slow-spreading isochron in the Enderby Basin. A discrete, denser enriched or less depleted mantle beneath the Antarctic Plate is an alternative explanation for the large scale thin oceanic crust concentrated on the southern flank of the SWIR.     

The influence of increased iron concentration on survival and growth of seedlings and young plants of eelgrass Zostera marina

Iron (Fe) is an essential nutrient for plants but toxic at high concentrations. We subjected seedlings and young plants of eelgrass Zostera marina to different seawater iron concentrations (500, 600, 700, 800, 1,000 and 1,500 μg/L) for 30 days under controlled laboratory conditions. Natural seawater without added iron (500 μg/L) was used as reference seawater. No sediments were provided to avoid iron scavenging by particle surfaces in the sediment. We measured plant response in terms of survivorship, morphology, growth rate and productivity. Survival analysis combined with morphological, dynamic and productive assessment suggested that the optimum seawater iron concentration for the establishment of Z. marina seedlings and young plants is 700 μg/L. The no observed effect concentration, lowest observed effect concentration, lethal concentration that caused an increase in mortality to 10% of that of the control, and the effect concentration that caused a decrease in growth to 10% of that of the control values of young plants were significantly lower than those of seedlings, implying an increased sensitivity to high Fe concentrations (>1,000 μg/L). This study further develops our understanding of the physiological ecology of the early life stages of Z. marina and provides data that could prove helpful in the development of successful eelgrass restoration and conservation.     

<Emphasis Type="Italic">Zostera marina</Emphasis> seed burial can be enhanced by Manila clam <Emphasis Type="Italic">Ruditapes philippinarum</Emphasis>: A microcosm study

Seagrass seed bank plays a key role in the regeneration of new vegetation when seagrasses are removed by the natural or man-made disaster. Various factors may affect the development of sediment seed bank. We conducted a microcosm experiment to test the effects of burrowing and feeding activities of Manila clam, Ruditapes philippinarum on the burial of Zostera marina seeds in sediments. The effects of lasting time (3-hour, 1-day, 3-day, 7-day, 14-day and 28-day), clam density (0, 2, 4 and 8 clams with shell length of 3 cm in each microcosm) and clam size (shell length of 2, 3 and 4 cm at 4-clam density) on seed burial were examined in plastic microcosm cores (30 cm high × 10 in inner diameter) in a 28-day period. Results showed that the seed burial depth significantly increased with time, the density and the size of clams. No seeds were buried in the sediment in the cores without clams during the whole experiment period. For the 3-cm clams, about 91.61% of the seeds were buried in the sediment at the end of the experiment in the high-density treatment (8 clams at each core); while in the medium and low-density treatments (4 and 2 clams in each core, respectively), about 76.93% and 60.61% of the seeds were buried in the sediment, respectively. For the size treatments, large (4 cm) clams buried 89.56% of the seeds at the end of the experiment, much more than those of medium (3 cm, 76.93%) and small (2 cm, 61.50%) size clams. During the whole experiment period, nearly all of the buried seeds were at a depth of from 0 cm to 5 cm. These results suggested that Manila clam Ruditapes philippinarum may play an important positive role in seagrass seed bank dynamics in the field.     

Crustal structure of the Southwest Subbasin,South China Sea,from wide-angle seismic tomography and seismic reflection imaging

The Southwest Subbasin (SWSB) is an abyssal subbasin in the South China Sea (SCS), with many debates on its neotectonic process and crustal structure. Using two-dimensional seismic tomography in the SWSB, we derived a detailed P-wave velocity model of the basin area and the northern margin. The entire profile is approximately 311-km-long and consists of twelve oceanic bottom seismometers (OBSs). The average thickness of the crust beneath the basin is 5.3 km, and the Moho interface is relatively flat (10–12 km). No high velocity bodies are observed, and only two thin high-velocity structures (~7.3 km/s) in the layer 3 are identified beneath the northern continent-ocean transition (COT) and the extinct spreading center. By analyzing the P-wave velocity model, we believe that the crust of the basin is a typical oceanic crust. Combined with the high resolution multi-channel seismic profile (MCS), we conclude that the profile shows asymmetric structural characteristics in the basin area. The continental margin also shows asymmetric crust between the north and south sides, which may be related to the large scale detachment fault that has developed in the southern margin. The magma supply decreased as the expansion of the SWSB from the east to the west.     

Heterogeneous Gravity Data Fusion and Gravimetric Quasigeoid Computation in the Coastal Area of China

ABSTRACT

Different types of gravity observations are available over coastal areas. The main challenge for coastal geoid determination is the proper fusion of heterogeneous gravity data including land, shipborne, airborne, and altimetry-derived gravity data. This paper describes the gravity data fusion and the computation of the gravimetric quasigeoid in the coastal area of mainland China. An iterative procedure of the weighted least-squares prediction based on rectangular harmonic functions is used for merging the land, altimetric, shipborne, and airborne gravity data. Applying the analytical continuation method in Molodensky's theoretic frame, the merged gravity data are then used to determine the gravimetric quasigeoid model by using the generalized Stokes' integral in a remove-compute-restore fashion. The gravimetric quasigeoid model is compared with the height anomalies determined at 662 GPS leveling points over the coastal region of mainland China, where both the geodetic height and the normal height are known. The standard deviations of the differences in the coastal provinces range from 1.8 to 4.4 cm. For the entire computation area, the mean and standard deviation of the differences are 27.9 and 3.9 cm, respectively.     

Field study of set-up effect in open-ended PHC pipe piles

Large-scale field tests were conducted to study set-up effect in open-ended prestressed high-strength concrete pipe piles jacked into stratified soil. Four open-ended prestressed high-strength concrete pipe piles with 13 and 18 m in embedment depth were fully instrumented with fiber Bragg grating sensors and installed. Several restrike dynamic tests were performed on each test pile, with the time interval from 21.5 to 284 hours after installation. Static loading tests (SLTs) were later performed on each test pile at 408 hours after installation to substantiate the dynamic tests. Changes with time in pile bearing capacity and in the shaft and toe resistances were studied based on the results of the pile tests. The development of shaft resistance set-up in different layers was studied in particular. It was found that set-up effect in the shaft resistance is significant and the toe resistance increment was minor. The overall set-up factor of total bearing capacity was found to range from 0.09 to 0.53, and the set-up effect of friction pile is much larger than the end bearing pile. More significant set-up in shaft resistance was observed in fill and alluvium layer. The dimensionless set-up factor A for shaft resistance in marine deposits ranges from 0.5 to 1.43, and it contributes the most to the shaft resistance as the shaft resistance in marine deposits is higher.     

The prediction of traveling jet trenching in stiff clay based on the erosion failure mechanism

The performance of traveling jet trenching in stiff clay was tested. All the key parameters varied in the experiment, including the jet velocity, the shear strength of clay, the diameter of the nozzle, and the translational velocity of the nozzle. The jet–soil interface was found to be an arc. An equation was given to describe the interface. On the basis of the erosion failure mechanism, a new method is presented for predicting jet trenching depth. We first calculated the trajectory of the jet–soil interface and then predicted the distribution of the boundary layer shear stress along the jet–soil interface. The point where the wall shear stress was equal to the critical shear strength of clay was the ultimate trenching depth. The predictive results were found to fit the experimental results well.     

The application of cutting plus waterlogging to control Spartina alterniflora on saltmarshes in the Yangtze Estuary,China

Control and eradication of the exotic and invasive plant Spartina alterniflora within the Chongming Dongtan nature reserve, Shanghai, China, is vital for the management and conservation of the saltmarshes. A demonstration project was established using waterlogging and cutting to control this invasive species. Results from 2007 to 2008 showed that, although the managed waterlogging significantly reduced biomass and seed production of S. alterniflora at an early stage, the species subsequently showed rapid adaptation to the long-term waterlogging stress. Thus, managed waterlogging alone was insufficient for the effective eradication of S. alterniflora. However, managed waterlogging for around 3 months, combined with cutting the above-ground part of S. alterniflora at a key stage (flowering period in July), controlled and eradicated the plant successfully. Both the above-ground and below-ground parts of S. alterniflora were killed and the plants began to decompose after 3 months. Furthermore, there was no re-growth of the emergent part of S. alterniflora in the following years. However, once the impounded water was released restoring the natural hydrodynamic regime of the saltmarshes, the seeds and seedlings of S. alterniflora reinvaded the controlled site from the neighboring areas and the S. alterniflora community was re-established. Thus, after eradication of S. alterniflora, control measures should be maintained to prevent the re-establishment of S. alterniflora. The results of this demonstration project indicate a potentially useful and effective approach for the control and management of large-scale invasion by S. alterniflora on saltmarshes in the Yangtze Estuary, China.     

Molecular weight and chemical reactivity of dissolved trace metals (Cd,Cu, Ni) in surface waters from the Mississippi River to Gulf of Mexico

It is generally assumed that estuarine mixing is continuous for metals from terrestrial sources, gradually decreasing towards the open ocean endmember. Here we show that, chemical reactivity, determined by ion exchange method, and molecular weight distributions, obtained using cross-flow ultrafiltration, of dissolved Cd, Cu, and Ni in the surface waters of the Gulf of Mexico varied systematically across the estuarine mixing zone of the Mississippi River. Most size or chemical affinity fractions of dissolved metals (<0.4 μm) were linearly related to salinity (10.8–36.6), suggesting that the distribution of these elements was mainly controlled by continuous mixing processes. Dissolved concentrations across the salinity gradient ranged for Cd: 87–187 pM; Cu: 1.4–18.3 nM; and Ni: 2.6–18.8 nM, with highest values near the Mississippi river mouth, and lowest concentrations in a warm core ring in the Gulf of Mexico. Dissolved Cd was mostly present as a truly dissolved (<10 kDa, 97 ± 1%) and cationic fraction (Chelex-100 extractable, 94 ± 4%). A novel observation across the estuarine mixing zone was that colloidal metal concentrations were identical to either inert (for Cu, Ni) or AMPG-labile anionic (Cu, Cd) fractions. The difference in behavior between Cu and the other two metals might indicate differences in the biopolymeric nature of the metal–organic chelates. In particular, the anionic-organic Cd fractions accounted for just 3 ± 1%, on average. However, for Cu, it was 24 ± 4%, and for Ni, it was 9 ± 6%. The fractions of the total dissolved metal fractions that were “inert” averaged 31 ± 10% for Cu and 29 ± 12% for Ni. Small but noticeable amounts (6 ± 3%) of dissolved inert Cd fractions were also present. Apparent non-local transport processes, likely associated with cross-shelf sediment resuspension processes, could have been responsible for the relatively high concentrations of ‘inert’ and ‘anionic’ metal fractions in high salinity coastal waters, and accounting for the persistence of metals bound to humic substances in the Gulf of Mexico.