Crustal structure of the Southwest Subbasin,South China Sea,from wide-angle seismic tomography and seismic reflection imaging

The Southwest Subbasin (SWSB) is an abyssal subbasin in the South China Sea (SCS), with many debates on its neotectonic process and crustal structure. Using two-dimensional seismic tomography in the SWSB, we derived a detailed P-wave velocity model of the basin area and the northern margin. The entire profile is approximately 311-km-long and consists of twelve oceanic bottom seismometers (OBSs). The average thickness of the crust beneath the basin is 5.3 km, and the Moho interface is relatively flat (10–12 km). No high velocity bodies are observed, and only two thin high-velocity structures (~7.3 km/s) in the layer 3 are identified beneath the northern continent-ocean transition (COT) and the extinct spreading center. By analyzing the P-wave velocity model, we believe that the crust of the basin is a typical oceanic crust. Combined with the high resolution multi-channel seismic profile (MCS), we conclude that the profile shows asymmetric structural characteristics in the basin area. The continental margin also shows asymmetric crust between the north and south sides, which may be related to the large scale detachment fault that has developed in the southern margin. The magma supply decreased as the expansion of the SWSB from the east to the west.     

Heterogeneous Gravity Data Fusion and Gravimetric Quasigeoid Computation in the Coastal Area of China

ABSTRACT

Different types of gravity observations are available over coastal areas. The main challenge for coastal geoid determination is the proper fusion of heterogeneous gravity data including land, shipborne, airborne, and altimetry-derived gravity data. This paper describes the gravity data fusion and the computation of the gravimetric quasigeoid in the coastal area of mainland China. An iterative procedure of the weighted least-squares prediction based on rectangular harmonic functions is used for merging the land, altimetric, shipborne, and airborne gravity data. Applying the analytical continuation method in Molodensky's theoretic frame, the merged gravity data are then used to determine the gravimetric quasigeoid model by using the generalized Stokes' integral in a remove-compute-restore fashion. The gravimetric quasigeoid model is compared with the height anomalies determined at 662 GPS leveling points over the coastal region of mainland China, where both the geodetic height and the normal height are known. The standard deviations of the differences in the coastal provinces range from 1.8 to 4.4 cm. For the entire computation area, the mean and standard deviation of the differences are 27.9 and 3.9 cm, respectively.     

Field study of set-up effect in open-ended PHC pipe piles

Large-scale field tests were conducted to study set-up effect in open-ended prestressed high-strength concrete pipe piles jacked into stratified soil. Four open-ended prestressed high-strength concrete pipe piles with 13 and 18 m in embedment depth were fully instrumented with fiber Bragg grating sensors and installed. Several restrike dynamic tests were performed on each test pile, with the time interval from 21.5 to 284 hours after installation. Static loading tests (SLTs) were later performed on each test pile at 408 hours after installation to substantiate the dynamic tests. Changes with time in pile bearing capacity and in the shaft and toe resistances were studied based on the results of the pile tests. The development of shaft resistance set-up in different layers was studied in particular. It was found that set-up effect in the shaft resistance is significant and the toe resistance increment was minor. The overall set-up factor of total bearing capacity was found to range from 0.09 to 0.53, and the set-up effect of friction pile is much larger than the end bearing pile. More significant set-up in shaft resistance was observed in fill and alluvium layer. The dimensionless set-up factor A for shaft resistance in marine deposits ranges from 0.5 to 1.43, and it contributes the most to the shaft resistance as the shaft resistance in marine deposits is higher.     

The prediction of traveling jet trenching in stiff clay based on the erosion failure mechanism

The performance of traveling jet trenching in stiff clay was tested. All the key parameters varied in the experiment, including the jet velocity, the shear strength of clay, the diameter of the nozzle, and the translational velocity of the nozzle. The jet–soil interface was found to be an arc. An equation was given to describe the interface. On the basis of the erosion failure mechanism, a new method is presented for predicting jet trenching depth. We first calculated the trajectory of the jet–soil interface and then predicted the distribution of the boundary layer shear stress along the jet–soil interface. The point where the wall shear stress was equal to the critical shear strength of clay was the ultimate trenching depth. The predictive results were found to fit the experimental results well.     

The application of cutting plus waterlogging to control Spartina alterniflora on saltmarshes in the Yangtze Estuary,China

Control and eradication of the exotic and invasive plant Spartina alterniflora within the Chongming Dongtan nature reserve, Shanghai, China, is vital for the management and conservation of the saltmarshes. A demonstration project was established using waterlogging and cutting to control this invasive species. Results from 2007 to 2008 showed that, although the managed waterlogging significantly reduced biomass and seed production of S. alterniflora at an early stage, the species subsequently showed rapid adaptation to the long-term waterlogging stress. Thus, managed waterlogging alone was insufficient for the effective eradication of S. alterniflora. However, managed waterlogging for around 3 months, combined with cutting the above-ground part of S. alterniflora at a key stage (flowering period in July), controlled and eradicated the plant successfully. Both the above-ground and below-ground parts of S. alterniflora were killed and the plants began to decompose after 3 months. Furthermore, there was no re-growth of the emergent part of S. alterniflora in the following years. However, once the impounded water was released restoring the natural hydrodynamic regime of the saltmarshes, the seeds and seedlings of S. alterniflora reinvaded the controlled site from the neighboring areas and the S. alterniflora community was re-established. Thus, after eradication of S. alterniflora, control measures should be maintained to prevent the re-establishment of S. alterniflora. The results of this demonstration project indicate a potentially useful and effective approach for the control and management of large-scale invasion by S. alterniflora on saltmarshes in the Yangtze Estuary, China.     

Molecular weight and chemical reactivity of dissolved trace metals (Cd,Cu, Ni) in surface waters from the Mississippi River to Gulf of Mexico

It is generally assumed that estuarine mixing is continuous for metals from terrestrial sources, gradually decreasing towards the open ocean endmember. Here we show that, chemical reactivity, determined by ion exchange method, and molecular weight distributions, obtained using cross-flow ultrafiltration, of dissolved Cd, Cu, and Ni in the surface waters of the Gulf of Mexico varied systematically across the estuarine mixing zone of the Mississippi River. Most size or chemical affinity fractions of dissolved metals (<0.4 μm) were linearly related to salinity (10.8–36.6), suggesting that the distribution of these elements was mainly controlled by continuous mixing processes. Dissolved concentrations across the salinity gradient ranged for Cd: 87–187 pM; Cu: 1.4–18.3 nM; and Ni: 2.6–18.8 nM, with highest values near the Mississippi river mouth, and lowest concentrations in a warm core ring in the Gulf of Mexico. Dissolved Cd was mostly present as a truly dissolved (<10 kDa, 97 ± 1%) and cationic fraction (Chelex-100 extractable, 94 ± 4%). A novel observation across the estuarine mixing zone was that colloidal metal concentrations were identical to either inert (for Cu, Ni) or AMPG-labile anionic (Cu, Cd) fractions. The difference in behavior between Cu and the other two metals might indicate differences in the biopolymeric nature of the metal–organic chelates. In particular, the anionic-organic Cd fractions accounted for just 3 ± 1%, on average. However, for Cu, it was 24 ± 4%, and for Ni, it was 9 ± 6%. The fractions of the total dissolved metal fractions that were “inert” averaged 31 ± 10% for Cu and 29 ± 12% for Ni. Small but noticeable amounts (6 ± 3%) of dissolved inert Cd fractions were also present. Apparent non-local transport processes, likely associated with cross-shelf sediment resuspension processes, could have been responsible for the relatively high concentrations of ‘inert’ and ‘anionic’ metal fractions in high salinity coastal waters, and accounting for the persistence of metals bound to humic substances in the Gulf of Mexico.     

Factors to consider in evaluating the management and conservation effectiveness of a whale sanctuary to protect and conserve the North Atlantic right whale (Eubalaena glacialis)

This paper examines key factors used in protecting the migratory North Atlantic right whale within the context of a marine protected area (MPA) system, using the Grand Manan Whale Conservation Area, in New Brunswick Canada, as a case study example. Designated as a conservation area in 1993, before the Oceans Act came into effect, the Grand Manan conservation area currently does not form part of the Canadian network of MPAs. Given the possibility that MPA designation may occur, the paper examines factors that should be considered in meeting International Union for Conservation of Nature (IUCN) MPA design criteria and IUCN evaluation model requirements. An MPA evaluation framework based on an IUCN evaluation model (Hockings et al., 2000 [1]) is designed to assess the effectiveness of an MPA in protecting a migratory right whale. Case study results indicate that current management and research activities for the Grand Manan conservation area address most governance, biophysical and socio-economic issues under an IUCN evaluation framework. On a site basis, it is recommended that the Grand Manan conservation area be designated as a component of the Canadian network of MPAs and that regulations be developed and implemented under the Species at Risk Act to clearly define activities considered damaging or destructive to right whale critical habitat. Recommendations also suggest the preparation of a combined site management-action plan for the Grand Manan conservation area indicating how activities specified in North Atlantic Right Whale Recovery Strategy will be implemented locally. On a regional and international basis, recommendations call for an internationally coordinated and integrated approach to right whale protection within the context of a network of designated critical habitat areas. Recommended activities include: continued Canadian participation in cross-border research and actions to mitigate threats to the right whales over their migratory range; development of a regional right whale management and monitoring strategy; and designation of additional critical habitats in national/international waters. It is further recommended that the evaluation framework developed by this paper be used as a model in assessing the conservation and management effectiveness of MPAs protecting other migratory marine species.     

A System for Fast Cartographic Sounding Selection

Soundings on nautical charts provide information about the shape of the ocean bottom between chart depth curves. A single chart may have thousands of soundings posted on it. This article describes a system for automatic cartographic sounding selection. In this system, a new algorithm for automated selecting soundings is developed. The algorithm is employed in such a way that it can guarantee (a) fast and accurate selecting sounding, (b) processing the circular depth curves, (c) solving the overplotting problems between depth curves and soundings, and (d) keeping selected soundings “prettier.” The system was intensively tested using real data sets, and its superiority has been revealed by the testing results.     

Application of a Biological Tool for Estimating Current Annual Rates of Erosion and Deposition in Modern Coastal Environments: A Case Study in the Bay of Bengal Coast

The marine polychaete Diopatra cuprea (Bosc) produces tubes that protrude above the sediment surface. To the part above the sediment surface the worm attaches foreign particles. A sharp boundary separates the parts above and below the sediment surface. With subsequent erosion, part of the tube without attached particles becomes exposed and this exposed part indicates the amount of erosion. With subsequent sedimentation, the tubes are enlarged upward and the sharp boundary is found below the sediment surface indicating the amount of subsequent sedimentation. This mode of construction of tubes during an average life span of two years renders tubes as simple but excellent natural tools for precise and easy measurement of the latest annual rates of erosion and deposition in coastal areas, data that are essential for the solving of coastal engineering and geoenvironmental problems. Comparison of this tool with expensive long-term coastal profiling data in four areas in the Bay of Bengal coast indicates its correctness and high applicational value. This revised model can be applied to modern coastal environments only for calculating latest annual rates of both erosion and deposition as correctly as latest physical techniques. Being based on the similar organosedimentary principle, it distinctively contrasts with the earlier model of Myers which provides information on the amount of sediment accumulation only without any time connotation and, it may generate erroneous results if applied to the geologic past unless some limitations evolved in the processes of dewatering, compaction, lithification and diagenesis are removed.     

Ferromanganese Nodules and Crusts from the Christmas Island Region,Indian Ocean

A sampling expedition has shown that largely hydrogenetic marine ferromanganese deposits occur in the Christmas Island region south of Java (~10°S), as small nodules on seamount slopes and abyssal plains (red clay), and as thick crusts on volcanic ridges and seamounts. Vernadite is dominant, with birnessite, jacobsite and todorokite common. Nodules were recovered in 25% of free-fall grab stations in water 4600-5900 m deep, and are not abundant where present. The nodules average 9.6% Fe, 19.7% Mn, 0.51% Ni, 0.49% Cu, and 0.12% Co. Crusts are common in water 1450-3700 m deep, with average deposition rates of 1-1.5 mm / m.y. The crusts average 13.9% Fe, 16.2% Mn, 0.35% Ni, 0.11% Cu, and 0.44% Co. Cobalt grades are higher (~0.8%) in shallower water ( < 2500 m), so future exploration should concentrate on depths of 500-1500 m near the oxygen minimum zone.