Fish Assemblage Responses to a Low-head Dam Removal in the Lancang River

Dam removal is becoming an effective approach for aquatic biodiversity restoration in damming river in order to balance the aquatic ecosystem conservation with large-scale cascade damming. However, the effects of dam removal on fish communities in Asian mountainous rivers, which are dominated by Cypriniformes fishes, are still not well known. To determine whether dam removal on a mountainous river benefit restoration of fish diversity, we investigated the response of fish assemblage to dam removal using a before-after-control-impact design in two tributaries of the Lancang River(dam removal river: the Jidu River, and control river: the Fengdian River). Fish surveys were conducted one year prior to dam removal(2012) and three years(2013–2015) following dam removal. We observed rapidly and notably spatio-temporal changes in fish biodiversity metrics and assemblage structure, occurring in the Jidu River within the first year after dam removal. Overall, fish species richness, density and Shannon-Wiener diversity all increased immediately in above-and below-dam sites, and maintained a stable level in subsequent years, compared to unchanged situation in the control river. All sites in the Jidu River experienced shifts in fish composition after dam removal, with the greatest temporal changes occurred in sites below-and above-the former dam, resulting in a temporal homogenization tendency in the dam removed river. These findings suggest that dam removal can benefit the recovery of habitat conditions and fish community in Asian mountainous rivers, but the results should be further evaluated when apply to other dammed rivers since the dam age, fluvial geomorphology and situation of source populations could all affect the responses of fish assemblages.     

An integrated technology for gas control and green mining in deep mines based on ultra-thin seam mining

With the increasing demand for coal resources, coal mining has gradually entered into the deep strata of coal seams. Although the increase in mining depth improves energy security, it is associated with severe hazards, especially coal and gas outburst. Protective seam mining is an efficient method for gas control and has been widely used in major coal-producing countries. However, studies on deep ultra-thin protective seam (thickness 0.1–1 m, average thickness 0.5 m) mining and its related problems have been rarely reported. Focusing on the challenges resulting from deep mining (mining depth >1100 m) and the research gap, a coal and gas co-exploitation technique, which combines the gas control technology and green mining (including coal preparation and backfilling), has been proposed in this work. Significant benefits have been achieved in the twelfth coal mine of the Pingdingshan coalfield (study area) following the implementation of this technique. The application of the gas control technology markedly improved the gas drainage efficiency, promoted increased gas utilization, and reduced the greenhouse gas emission, providing notable economic and environmental benefits. In addition, implementation of green mining improved the coal quality, relieved the burden of the transport system, and, in particular, effectively prevented surface subsidence, thus protecting the ecological environment of the mining area, which offered significant economic, environmental, and social benefits. The practice in the twelfth coal mine could be used as a valuable example for coal mines with similar geological conditions.     

�����������ƽ�������쳣��������г����

??????г????????????????????????????????????????????????????????????????????????????????????????????????????????????????????5????????????????г?????????????Stokes?????????￡????????????????????????г????????????????????????????????????????????     

伊犁石炭纪裂谷的时空演化特征

通过对伊犁盆地石炭纪裂谷火山岩的地层学、岩石学、岩石地球化学等方面的论述,分析了裂谷的形成与演化,探讨了裂谷形成的区域动力学背景。认为裂谷期火山活动具幕式喷发的特点;随着时代的演替,裂谷由初始裂陷的察布查尔－伊什基里克一带扩展到整个伊犁地块;裂谷的形成主要与中天山南北两侧古洋壳的相向俯冲所导致的地幔物质上涌、中上地壳的背向伸展有关。     

Eutectic metal + troilite + Fe‐Mn‐Na phosphate + Al‐free chromite assemblage in shock‐produced chondritic melt of the Yanzhuang chondrite

An assemblage with FeNi metal, troilite, Fe‐Mn‐Na phosphate, and Al‐free chromite was identified in the metal‐troilite eutectic nodules in the shock‐produced chondritic melt of the Yanzhuang H6 meteorite. Electron microprobe and Raman spectroscopic analyses show that a few phosphate globules have the composition of Na‐bearing graftonite (Fe_,Mn,Na)₃(PO₄)₂, whereas most others correspond to Mn‐bearing galileiite Na(Fe,Mn)₄(PO₄)₃ and a possible new phosphate phase of Na₂(Fe,Mn)₁₇(PO₄)₁₂ composition. The Yanzhuang meteorite was shocked to a peak pressure of 50 GPa and a peak temperature of approximately 2000 °C. All minerals were melted after pressure release to form a chondritic melt due to very high postshock heat that brought the chondrite material above its liquidus. The volatile elements P and Na released from whitlockite and plagioclase along with elements Cr and Mn released from chromite are concentrated into the shock‐produced Fe‐Ni‐S‐O melt at high temperatures. During cooling, microcrystalline olivine and pyroxene first crystallized from the chondritic melt, metal‐troilite eutectic intergrowths, and silicate melt glass finally solidified at about 950–1000 °C. On the other hand, P, Mn, and Na in the Fe‐Ni‐S‐O melt combined with Fe and crystallized as Fe‐Mn‐Na phosphates within troilite, while Cr combined with Fe and crystallized as Al‐free chromite also within troilite.     

相接双星SW Lac的视向速度观测及其活动性的研究

本文发表了WUMa型相接双星SW Lac的1984年视向速度观测,它给出的新的分光质比q_(sp)=m_2/m_1=1.255±0.011。通过光变曲线观测和视向速度曲线观测的联合分析,得出改进了的双星绝对参量:M_1=0.78M_⊙,M_2=0.96M_⊙,R=0.91R_⊙和R_2=1.00R_⊙,在此基础上,对SW Lac双星的周期变化,可能的质量交流和损失,以及黑子活动等作了详细分析讨论。     

A GRB Follow-up System at the Xinglong Observatory and Detection of the High-Redshift GRB 060927

A gamma-ray burst (GRB) optical photometric follow-up system at the Xinglong Observatory of National Astronomical Observatories of China (NAOC) has been constructed. It uses the 0.8-m Tsinghua-NAOC Telescope (TNT) and the 1-m EST telescope, and can au-tomatically respond to GRB Coordinates Network (GCN) alerts. Both telescopes slew rela-tively fast, being able to point to a new target field within ～ 1 min upon a request. Whenever available, the 2.16-m NAOC telescope is also used. In 2006 the system responded to 15 GRBs and detected seven early afterglows. In 2007 six GRBs have been detected among 18 follow-up observations. TNT observations of the second most distant GRB 060927 (z = 5.5) are shown, which started as early as 91 s after the GRB trigger. The afterglow was detected in the combined image of the first 19 × 20 s unfiltered exposures. This GRB follow-up system has joined the East-Asia GRB Follow-up Observation Network (EAFON).     

Receiver function imaging in strongly laterally heterogeneous crust: Synthetic modeling of BOLIVAR data

We resolve a large (~20 km) discrepancy in Moho depth determined from PdS receiver functions (RFs) and from active source seismic profiling in the complex Caribbean-South American plate boundary zone in eastern Venezuela. As part of the BOLIVAR experiment 20 broadband stations were deployed along an active source profile to record teleseisms. Using the extremely heterogeneous crustal model obtained from active source data, we generated 2D finite-difference elastic wave synthetics and from them calculated receiver functions and CCP stacks. We compare the observations with synthetic sections that have been spatially sampled at 0.25 km to 40 km. The densely sampled synthetics show that several events in the field data that were originally interpreted as the Moho are multiple reflections within sedimentary basins. Where the Moho has the steepest dip under the plate boundary the CCP stacks fail to image the Moho well, regardless of the density of spatial sampling. A suitable spatial sampling criterion for clearly imaging the lower crust and Moho is to overlap Fresnel zones by 50% at Moho depth, which for the 1 Hz receiver functions examined here, requires an instrument spacing of 15–20 km, with the actual field data density ranging from 20 km to 100 km.     

Long-term statistics of extreme tsunami height at Crescent City

Historically, Crescent City is one of the most vulnerable communities impacted by tsunamis along the west coast of the United States, largely attributed to its offshore geography. Trans-ocean tsunamis usually produce large wave runup at Crescent Harbor resulting in catastrophic damages, property loss and human death. How to determine the return values of tsunami height using relatively short-term observation data is of great significance to assess the tsunami hazards and improve engineering design along the coast of Crescent City. In the present study, the extreme tsunami heights observed along the coast of Crescent City from 1938 to 2015 are fitted using six different probabilistic distributions, namely, the Gumbel distribution, the Weibull distribution, the maximum entropy distribution, the lognormal distribution, the generalized extreme value distribution and the generalized Pareto distribution. The maximum likelihood method is applied to estimate the parameters of all above distributions. Both Kolmogorov-Smirnov test and root mean square error method are utilized for goodness-of-fit test and the better fitting distribution is selected. Assuming that the occurrence frequency of tsunami in each year follows the Poisson distribution, the Poisson compound extreme value distribution can be used to fit the annual maximum tsunami amplitude, and then the point and interval estimations of return tsunami heights are calculated for structural design. The results show that the Poisson compound extreme value distribution fits tsunami heights very well and is suitable to determine the return tsunami heights for coastal disaster prevention.     

Parameter identification of JONSWAP spectrum acquired by airborne LIDAR

In this study, we developed the first linear Joint North Sea Wave Project (JONSWAP) spectrum (JS), which involves a transformation from the JS solution to the natural logarithmic scale. This transformation is convenient for defining the least squares function in terms of the scale and shape parameters. We identified these two wind-dependent parameters to better understand the wind effect on surface waves. Due to its efficiency and high-resolution, we employed the airborne Light Detection and Ranging (LIDAR) system for our measurements. Due to the lack of actual data, we simulated ocean waves in the MATLAB environment, which can be easily translated into industrial programming language. We utilized the Longuet-Higgin (LH) random-phase method to generate the time series of wave records and used the fast Fourier transform (FFT) technique to compute the power spectra density. After validating these procedures, we identified the JS parameters by minimizing the mean-square error of the target spectrum to that of the estimated spectrum obtained by FFT. We determined that the estimation error is relative to the amount of available wave record data. Finally, we found the inverse computation of wind factors (wind speed and wind fetch length) to be robust and sufficiently precise for wave forecasting.