Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

海水分光反射率与叶绿素浓度的相关分析

通过对东京湾两年度不同季节海水分光反射率与叶绿素浓度进行统计分析，结果表明，叶绿素浓度Ｃ与两谱段分光反射率之比Ｒｗ（λｊ）／Ｒｗ（λｊ）具有幂函关系Ｃ＝Ａ［Ｒｗ（λｊ）／Ｒｗ（λｊ）Ｂ。两者的对数显示出较好的线性关系，即ｌｏｇＣ＝ｌｏｇＡ＋Ｂｌｏｇ［Ｒｗ（λｊ）／Ｒｗ（λｊ）］。负相关系数达０．９９。相关方程之一为Ｃ＝３．３２９［Ｒｗ（５２０）／Ｒｗ（５５０）］－１．３８４（１９８７年６月初）．在梅雨季节之后，相关方程为Ｃ＝１２．６８［Ｒｗ（５２０）／Ｒｗ（５５０）］－２．０１０（１９８８年８月）。这表明了海湾或混浊的沿岸水质，在叶绿素浓度算法中，统计参数Ａ和Ｂ的确立，要基于不同季节不同水质的现场观测资料。     

海带雌性原生质体的分离与培养

于1993年1月 - 1993年4月，为了制备遗传性纯一的基因工程受体，用酶法从海带雌配子体单性生殖系分离雌性单倍体原生质体。从皱纹盘鲍消化腺及消化器官提取出鲍酶，在25°C下、1％（W／V）的鲍酶与2％（W／V）的纤维素酶（Onozuka R－10）合用能有效解离单细胞和原生质体。海带雌性原生质体经2d培养再生了细胞壁。     

海洋生物-光学算法研究──南黄海叶绿素浓度的估算

根据1995年9月中日合作南黄海现场观测资料，对南黄海生物一光学算法进行研究。首先对南黄海现场多光谱反射比数据进行因子分析，解反射比协方差矩阵的特征问题；解出特征值和对应的特征向量，求出主因子，然后建立叶绿素a浓度对主因子的多元线性回归方程，并对算法进行回报和预报检验。计算结果表明，该算法具有较高精度，同时也显示出天气条件对估算精度产生较大影响。     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

青岛港风暴潮经验统计预报

本文利用青岛港多年实测资料,分析了该港风暴潮概况。而后通过多元回归技术,求取了该港极值增减水的预报公式。经非独立和独立检验,结果令人满意。     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

Variation in Water Masses on Shelf of Northern Bering Sea in September 2016-2018

Abstract

Based on hydrological data obtained during the 7th to 9th Chinese National Arctic Research Expeditions in the summers of 2016–2018, the main water structure on the shelf of the northern Bering Sea and the volume and heat fluxes of the Bering Strait throughflow were analyzed. Distinct variability was identified in the three Pacific water masses feeding the strait - Anadyr Water (AW), Bering Shelf Water (BSW) and Alaskan coastal water (ACW). Overall, the temperature and salinity of the entire section increased each year, with 2018 showing significant anomalies, i.e., a temperature anomaly of up to 1?°C and a maximum salinity anomaly of 2. From 2016 to 2018, the extent of the ACW gradually narrowed in the eastern part of this section, while the AW expanded eastward each year. The net volume transport through each of the three sections increased poleward from 1.65?Sv to 2.76?Sv, with the AW increasing from 0?Sv to 1.03?Sv, the BSW varying between 0.52–1.65?Sv, and the ACW gradually decreasing from 1.04?Sv to disappearing completely. The net heat fluxes were also poleward, varying between 25.77 TW and 61.50 TW, and showing a significant increase. Significant variations in magnitude and extent were observed in each water mass of the Bering Strait throughflow, which could produce widespread effects in the Arctic Ocean and the global ocean beyond.     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.