新特提斯洋晚白垩世演化特点:来自泽当共国日二长花岗岩年代学、地球化学及Sr-Nd同位素证据

为加深对西藏泽当地区新特提斯洋演化的认识,对西藏泽当蛇绿混杂岩带内的共国日二长花岗岩进行了岩石学、岩石地球化学、同位素及年代学等研究,研究显示:共国日二长花岗岩岩体规模小、岩性稳定,LA-ICP-MS锆石U-Pb年龄为(90.40±0.68)Ma,属晚白垩世;岩石地球化学具高硅、富铝、富钾、低钛和准铝质钙碱性花岗岩特征;轻稀土富集、重稀土亏损,具明显的负Eu异常,微量元素表现为相对富集Rb、K、Ba、Th、U等大离子亲石元素,显著亏损Nb、P、Ti等高场强元素;(⁸⁷Sr/⁸⁶Sr)_i=0.705 708~0.706 284,(¹⁴³Nd/¹⁴⁴Nd)_i=0.512 689~0.512 716,ε_Nd(t)=2.00~2.51。以上特征表明,位于泽当蛇绿混杂岩带内的共国日二长花岗岩属于I型花岗岩,由正常岛弧岩浆形成,应为晚白垩世新特提斯洋向北俯冲形成的岛弧环境下俯冲带上部地壳部分熔融的产物,其不属于泽当蛇绿岩的组成部分,表明在90 Ma前泽当洋内弧已经消失。     

Distribution Prediction of Middle-deep Lacustrine Source Rocks in Eocene Wenchang Formation in the Kaiping Sag,Pearl Mouth Basin

Oil and gas shows are rich in drilling wells in Kaiping sag,however,large oilfield was still not found in this area.For a long time,it is thought that source rocks were developed in the middle-deep lacustrine facies in the Eocene Wenchang Formation,while there is no source rocks that in middle-deep lacustrine facies have been found in well.Thickness of Wenchang Formation is big and reservoirs with good properties could be found in this formation.Distribution and scale of source rock are significant for further direction of petroleum exploration.Distribution characterization of middle-deep lacustrine facies is the base for source rock research.Based on the sedimentary background,fault activity rate,seismic response features,and seismic attributes were analyzed.No limited classification method and multi-attributes neural network deep learning method were used for predicting of source rock distribution in Wenchang Formation.It is found that during the deposition of lower Wenchang Formation,activity rate of main fault controlling the sub sag sedimentation was bigger than 100 m/Ma,which formed development background for middle-deep lacustrine facies.Compared with the seismic response of middle-deep lacustrine source rocks developed in Zhu I depression,those in Kaiping sag are characterized in low frequency and good continuity.Through RGB frequency decomposition,areas with low frequency are main distribution parts for middle-deep lacustrine facies.Dominant frequency,instantaneous frequency,and coherency attributes of seismic could be used in no limited classification method for further identification of middle-deep lacustrine facies.Based on the limitation of geology knowledge,multi-attributes of seismic were analyzed through neural network deep learning method.Distribution of middle-deep lacustrine facies in the fourth member of Wenchang Formation is oriented from west to east and is the largest.Square of the middle-deep lacustrine facies in that member is 154 km²and the volume is 50 km³.Achievements could be bases for hydrocarbon accumulation study and for exploration target optimization in Kaiping sag.     

U-Pb Zircon and Re-Os Molybdenite Geochronology of theW-Mo Mineralized Region of South Qinling,China, andtheir Tectonic Implications

A W-Mo mineralized region is located along the northern margin of the South Qinling tectonic belt of China. WMo mineralization occurs mainly in Cambrian–Ordovician clastic and carbonate rocks, and the ore bodies are structurally controlled by NW–SE-and NNE–SSW-striking faults. Evidence for magmatism in the area is widespread and is dominated by intermediate–felsic intrusives or apophyses, such as the Dongjiangkou, Yanzhiba, Lanbandeng, and Sihaiping granitic bodies. Quartz-vein-type mineralization and fault-controlled skarn-type mineralization dominate the ore systems, with additional enrichment in residual deposits. At present, there are few or insufficient studies on(1) the age of mineralization,(2) the relationship between intermediate–felsic granite and W-Mo mineralization,(3) the source of ore-forming materials,and(4) the metallogenic and tectonic setting of the mineralized area. In this paper, we present geochronology results for numerous intrusive granitic bodies in the South Qinling tectonic belt. U-Pb zircon geochronology of the Lanbandeng monzogranite and Wangjiaping biotite monzogranite yields ages of 222.7 ± 2.3 and 201.9 ± 1.8 Ma, respectively. In contrast to the Late Triassic age of the Lanbandeng monzogranite, the age of the newly discovered Wangjiaping biotite monzogranite places it at the Triassic–Jurassic boundary. Re-Os molybdenite geochronology on the Qipangou W-Mo deposit yielded a model age of 199.7 ± 3.9 Ma, indicating the deposit formed in the early Yanshanian period of the Early Jurassic. Granitoid intrusions in the mineralized area are characterized by composite granite bodies that crystallized at ca.240–190 Ma. While there were multiple stages of intrusion, most occurred at 210–220 Ma, with waning magmatic activity at 200–190 Ma. The Re-Os age of molybdenite in the region is ca. 200–190 Ma, which may represent a newly discovered period of W-Mo metallogenesis that occurred during the final stages of magmatism. The heat associated with this magmatism drove ore formation and might have provided additional ore-forming components for metallogenesis(represented by the Wangjiaping biotite monzogranite). Ore materials in the mineralized area were derived from mixed crustal and mantle sources. Enrichment of the region occurred during intracontinental orogenesis in the late Indosinian–Yanshanian, subsequent to the main Indosinian collision. At this time, the tectonic environment was dominated by extension and strike-slip motion.     

Geochronology, Fluid Inclusions and Isotopic Characteristics of the Dongjun Pb-Zn-Ag Deposit, Inner Mongolia, NE China

The Dongjun Pb-Zn-Ag deposit in the northern part of the Great Xing’an Range (NE China) consists of quartz-sulfide vein-type and breccia-type mineralization, related to granite porphyry. Hydrothermal alteration is well-developed and includes potassic-silicic-sericitic alteration, phyllic alteration and propylitic alteration. Three stages of mineralization are recognized on the basis of field evidence and petrographic observation, demarcated by assemblages of quartz-pyrite-arsenopyrite (early stage), quartz-polymetallic sulfide (intermediate stage) and quartz-carbonate-pyrite (late stage). Zircon LA-ICP-MS U-Pb dating indicates that the granite porphyry was emplaced at 146.7 ± 1.2 Ma (Late Jurassic). Microthermometry and laser Raman spectroscopy shows that ore minerals were deposited in conditions of intermediate temperatures (175–359°C), low salinity (0.5–9.3 wt% NaCl eqv.) and low density (0.60–0.91 g/cm3). Ore-forming fluids were derived largely from magmatic hydrothermal processes, with late-stage addition of meteoric water, belonging to a H2O-NaCl-CO2 ± CH4 system. The δ34SV-CDT values range from 0.75‰ to 4.70‰. The 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb values of the ore minerals are in the ranges of 18.240–18.371, 15.542–15.570, and 38.100–38.178, respectively. Data for the S and Pb isotopic systems indicate that the ore-forming metals and sulfur were derived from Mesozoic magma. Based on the geological characteristics and geochemical signatures documented in this study, we conclude that the Dongjun deposit is a mesothermal magmatic hydrothermal vein-type Pb-Zn-Ag deposit controlled by fractures and related to granite porphyry, in response to Late Jurassic tectonic–magmatic–hydrothermal activity. We further conclude that fluid immiscibility, fluid mixing and fluid-rock interactions were the dominant mechanisms for deposition of the ore-forming materials.     

辽东地区古元古代变基性岩床的成因和构造意义

辽东地区胶-辽-吉造山带发育大量的变基性岩墙/床,这些岩墙/床对研究造山带古元古代构造演化过程具有重要意义.本文通过对辽东地区辽河群中的变基性岩床进行岩石学、岩石地球化学和锆石LA-ICP-MS U-Pb年代学研究,探讨其成因和形成的构造背景,有助于深入认识胶-辽-吉造山带古元古代地质演化过程.辽东地区变基性岩床顺层侵入于辽河群大石桥组大理岩中,发生角闪岩相变质作用,岩石类型以斜长角闪岩和石榴斜长角闪岩为主,主要矿物为角闪石和斜长石,其他矿物有石榴子石、石英、黑云母、磁铁矿和黄铁矿等.变基性岩床样品的锆石具特征的环带结构和较低的Th/U值(0.01～0.34),指示锆石为变质成因,4个样品的锆石LA-ICP-MS U-Pb定年结果(1854±11 Ma、1846±12 Ma、1847±9 Ma和1848±7 Ma)表明基性岩床发生变质作用的时间为～1.85 Ga,与华北克拉通最终碰撞拼合的时间一致.根据基性岩床与胶-辽-吉造山带其他地区～2.1 Ga的基性岩具有相似的野外产状、岩石学和地球化学特征,推断其侵位时代可能为～2.1 Ga.基性岩床样品的SiO2含量为47.07％～52.18％,K2O+Na2O含量为1.78％～4.70％,MgO含量为3.92％～8.59％,属于拉斑玄武岩系列.大部分样品的稀土总量较低(47.3×10-6～109.5×10-6),富集轻稀土元素和大离子亲石元素(如Rb、Ba、La),亏损高场强元素(如Nb、Ta),Zr、Hf没有明显的亏损且未发生分馏作用.所有样品的Al2O3、CaO和Fe2O3T含量在主量元素相关性图解上分布规律且与MgO含量呈较好的相关性,Nb/La值(0.52～0.73)随SiO2和MgO含量的变化较小,表明岩浆在侵位过程中受地壳混染的程度较低,似"岛弧"型地球化学特征是富集岩石圈地幔源区遭受古俯冲组分改造的结果.结合已有的辽河群变质火山-沉积岩、辽吉花岗岩和基性岩的研究成果,胶-辽-吉造山带在～2.1 Ga处于陆内裂谷环境.     

微束分析测试技术十年(2011~2020)进展与展望

现代地球科学研究的重大突破在很大程度上取决于观测和分析技术的创新。新世纪以来,我国地球科学领域引进了一批高性能新型微束分析仪器设备,建立了一批高规格的实验室。本文回顾了近十年来微束分析技术与方法的主要进展及其在地球科学研究中的应用实例,包括电子探针、扫描电镜、透射电镜、大型离子探针、纳米离子探针、飞行时间二次离子质谱、激光剥蚀等离子体质谱、激光诱导原子探针、原子探针技术、显微红外光谱、同步辐射等,这些分析技术的进步和广泛应用极大地提高了我们对地球和行星演化历史及许多地质过程的理解。今后,应加快微束分析的新技术、新方法和新标准的开发,特别是高水平人才队伍建设,提高创新能力并在国际学术舞台上发挥重要作用。     

汞的稳定同位素分馏机理

汞是唯一能够以气态单质形式进行长距离传输的有毒重金属元素,其环境行为和健康危害受到广泛关注.近十多年来发展起来的汞稳定同位素技术为研究环境中汞的来源、迁移转化过程以及相应的生态环境效应提供了新的视野.汞同位素是自然界中唯一表现出多种显著非质量分馏(MIF)的独特金属同位素体系,对汞同位素的研究一直偏重应用,而对其分馏机理的认识十分有限.本文从汞稳定同位素分馏理论、分馏实验研究和实际环境过程的汞同位素分馏三方面系统阐述了近十多年来关于汞同位素分馏机理的研究成果、最新进展和未来发展方向.尽管目前的研究普遍认为无机汞的光化学氧化还原和甲基汞的光化学降解是环境中汞同位素MIF的主要产生机制,然而MIF程度和方向的影响因素还不完全清楚,其量化理论还未完全建立,实际环境过程中的分馏机理研究还相对缺乏.未来需要结合理论和实验研究进一步明确大气、陆地、海洋、极地、古环境等实际环境体系中的汞同位素分馏机理,进而拓展汞同位素的应用.     

湖南省涟源凹陷泥盆纪佘田桥组页岩储层测井评价

湘中地区涟源凹陷泥盆纪佘田桥组(D3s)富有机质页岩发育,区内参数井-湘新页1井(XXY-1)已在该组钻遇良好页岩气.为研究该套储层特征,依托湘新页1井的岩心和测井资料,通过数控测井系统的综合测井曲线响应特征和数据处理结果对该套储层进行了评价.结果表明,湘新页1井泥盆纪佘田桥组底部为优质页岩发育段,厚度达81.1 m,页岩TOC、物性均较好,具有较大资源潜力.     

Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.