载荷试验确定基床系数修正方法的讨论

Winkler地基模型是目前工程界应用最广的一种地基模型，但对其关键参数——基床系数k的确定，许多文献的表述并不一致。该文在大量试验资料的基础上，通过对该问题的深入研究，阐明了通过载荷试验确定基床系数修正方法的有关概念。对于砂性土地基，载荷板试验得出的基准基床系数仅需要进行基础大小修正，而对于粘性土地基，则需要进行基础大小和基础形状两项修正。     

The method of design for seismic data database system based on tree structure

Introduction In recent years, with the development of earthquake observation technology, increasing ofobservation stations and improvement of observation instruments which are digitalized and con-nected by network, a great deal of data is recorded, to some extend, which brings difficulty for usto manage and store them. It leads to traditional methods, which use the file system to managemass data, could not satisfy our requirement, and it is necessary to find a new method in place oftradit…     

挤扩支盘桩极限承载力的预测

用双曲线方法对110根挤扩支盘桩的极限承载力进行预测,并与直杆桩预测结果进行对比。结果表明由于支盘桩受力性状复杂,加载前期和中期预测精度较高,后期较低,误差超过15%;支盘桩的沉降曲线出现台阶时预测值与实测值误差较大;支盘桩极限承载力的预测精度与工程地质条件和桩本身的参数密切相关,桩身参数和地质条件相同条件下各桩预测精度比较接近。总体上直杆桩的预测结果优于支盘桩。     

Sedimentation rates in the Wanggang salt marshes, Jiangsu

1 IntroductionLand-ocean interaction in coastalzone is one of the key m atters of the International G eosphereand Biosphere Program (IG BP). The key problem s of the second phase in the next decadeinclude the m aterial cycle, the system evolution process …     

Karst database development in Minnesota: design and data assembly

The Karst Feature Database (KFD) of Minnesota is a relational GIS-based Database Management System (DBMS). Previous karst feature datasets used inconsistent attributes to describe karst features in different areas of Minnesota. Existing metadata were modified and standardized to represent a comprehensive metadata for all the karst features in Minnesota. Microsoft Access 2000 and ArcView 3.2 were used to develop this working database. Existing county and sub-county karst feature datasets have been assembled into the KFD, which is capable of visualizing and analyzing the entire data set. By November 17 2002, 11,682 karst features were stored in the KFD of Minnesota. Data tables are stored in a Microsoft Access 2000 DBMS and linked to corresponding ArcView applications. The current KFD of Minnesota has been moved from a Windows NT server to a Windows 2000 Citrix server accessible to researchers and planners through networked interfaces.     

峨眉山玄武岩与铅锌矿床成矿关系初探—以云南会泽铅锌矿床为例

本文以云南会泽铅锌矿为例，从成矿时代、成矿物来源、成矿流体来源和成矿热动力等方面初步讲座主峨眉山玄武岩与铅锌矿床成矿的关系。结果表明：矿床成矿时代可能与峨眉山玄武岩岩浆活动时代相近；峨眉山玄武岩在成矿过程中提供了部分成矿物质；伴随峨眉山玄武岩岩浆活动过程去气作用（包括地幔去气作用和岩浆去气作用）形成的流体参与了会泽铅锌矿成矿流体的形成；峨眉山玄武岩岩浆活动为成矿热动力的主要来源。     

甘肃省地质灾害变化趋势分析

依全省地质灾害现状及发展变化规律,用时间序列预测法对“九五”期间地质灾害趋势进行了预测,并在此基础上提出了防灾对策,为生态环境、经济、社会效益的协调发展和国土整治、国民经济持续、永续、综合发展提供决策依据。     

西南天山构造地层学初步研究

西南天山造山带可划分为伊犁中天山、中天山南缘、南天山和塔里木４个构造地层区。伊犁中天山区出露早元古代变质结晶基底及晚期地台型稳定盖层。中天山南缘区产出一套早古生代变质俯冲杂岩。南天山区早古生代为陆坡、陆棚相被动陆缘沉积，晚古生代发育洋壳建造。塔里木区北部出露中晚元古代“优地槽建造”的变质结晶基底和早震旦世后稳定盖层。     

高松矿田芦塘坝矿段矿床控矿特征新认识——构造溶蚀控矿

通过对芦塘坝矿段锡多金属矿床地质特征的深入研究及实际资料的剖析,提出该矿床是由燕山晚期侵入于深部的花岗岩浆分异形成的岩浆期后含矿热液,经导矿断裂上升后,充填于构造溶蚀空间而形成。      

川东南地区志留系龙马溪组页岩气有利区评价优选

通过对川东南地区志留系龙马溪组页岩有机质丰度、热成熟度、有机质类型、脆性矿物含量、页岩层厚度、埋藏深度、构造形态等七大地质因素的综合分析,认定该区分布广泛的页岩有机质含量较高,有机质类型较好,热演化程度高,生烃潜力大,具备形成页岩气藏的气源条件。页岩厚度较大,埋深较浅,脆性矿物含量较大,页岩气的保存条件良好,有利于页岩气的压裂与开采。