Chemical signature of intermediate water masses along western Portuguese margin

Although the circulation of intermediate water masses in the eastern North Atlantic remains poorly defined, the presence of fresher intermediate waters, the Sub-Artic (SAIW) and the Antarctic Intermediate Water (AAIW), as well the saline intermediate Mediterranean Water (MW), has been tracked using biogeochemical properties. Here we assess the hydrographic and chemical structures of intermediate waters along the western Portuguese margin by examining the vertical distributions and property-property plots of chemical tracers (oxygen and nutrients). AAIW was traced by low oxygen and high nutrients, while SAIW was recognized by low nutrients. The Mediterranean Water (MW) undercurrent is shown to spread towards the eastern flank of Gorringe bank. Concurrently, the fresher waters gained salt by direct incorporation of MW, while this water was enriched in nutrients on its way northward and westward owing, to a great extent, to the entrainment of an AAIW branch. The distributions of nutrients and apparent oxygen utilization are discussed in terms of regional ocean circulation. Our analysis suggests a circulation pattern of the various intermediate waters along the western Portuguese margin: MW extends all over the area, but its presence is more pronounced around cape St. Vincent; SAIW apparently moves southward, reaching the Gorringe bank region, and AAIW flows northward along the coast and around the bank.     

Models of travel demand with endogenous preference change and heterogeneous agents

In the literatures of regional science, urban economics, and urban development planning, a working assumption is that individuals respond to incentives and regulations, given their preferences. Models for planning and policy analyses are used to consider what might occur if the incentives or regulations were different. In these models, however, preferences are usually assumed to be given and stable, and agents are usually assumed to be homogeneous. This paper focuses on the implications of making preferences in models of policy implementation endogenously determined and time varying heterogeneous agents. We consider first the recent literature on intertemporal choice and preference change, which cuts across many disciplines, and more briefly the literature on norm-regarding behavior. We then elaborate a simple model of transportation demand—from a static to a dynamic orientation, from fixed and exogenously given preferences of strictly self-regarding agents to endogenously determined and policy-induced preferences of heterogeneous agents—and illustrate its characteristics with simple numerical examples.     

Lithospheric thermal and compositional structure of South China jointly inverted from multiple geophysical observations

The detailed lithospheric structure of South China is the basis for the understanding of tectonic processes of eastern China.Specifically,two essential issues in the study of lithospheric structure are the thermal and compositional structures,which are usually derived from either geophysical or geochemical observations.However,inversions from single geophysical or geochemical datasets have certain limitations,making it necessary to develop joint inversions of geophysical,geochemical and petrological datasets.In this paper,through thermodynamic simulation and probabilistic inversion,we inverted multiple datasets including topography,geoid height,surface heat flow and surface wave dispersion curves for the 3D lithospheric thermal and compositional structure of South China.The results reveal a thin(<100 km)and flat LAB beneath the South China Fold System Block and the lower Yangtze Craton.Also,we found that the lithospheric mantle is primarily composed of saturated peridotite,indicating that the ancient refractory lithospheric mantle has been replaced by new materials.The dominant dynamic mechanism for lithospheric thinning in eastern South China may be the flat subduction of ancient Pacific slab,while thermal erosion may have also played a significant role.In contrast,the LAB depth beneath the Sichuan Basin is much thicker(>200 km),suggesting that the thick and cold craton lithospheric roots are retained.There may exist a discontinuous interface beneath the Sichuan Basin,with the saturated lower layer thicker than the refractory upper layer.As a result,the lithospheric mantle of the Sichuan Basin and surrounding regions is mainly composed of saturated and transitional peridotite.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

Lateral continuity of basement seismic reflections in 15 Ma ultrafast-spreading crust at ODP Site 1256

The Ocean Drilling Program (ODP) initiated drilling at Site 1256D in the Guatemala Basin, about 1,000 km off the East Pacific Rise to penetrate plutonic rocks, anticipated to be relatively shallow in this region, formed at an ultra-fast spreading rate. IODP Expedition E312 successfully drilled into gabbros at ~1,150 m in basement. Multi-channel seismic traces show weak laterally coherent sub-basement reflections at borehole depths. Synthetic reflectivity seismograms were computed using a Ricker wavelet and impedance profiles from borehole sonic logs. These seismograms show significant sub-basement amplitude peaks. A zero-offset vertical seismic profile, shot on E312, was processed to investigate the authenticity of these reflections and their relationship to borehole geology. A dual scheme of the median filtering and F–K dip filtering was used. Tests with synthetic seismograms indicate the approach is effective at reasonable SNR levels. Downgoing energy is clearly identified but negligible upgoing energy is visible over random noise. These results indicate that lava flows and igneous contacts in upper ocean crust have significant topography on lateral scales less than the Fresnel Zone (~300 m) due to igneous and tectonic processes.     

An Analytical Model For Threshold Crossing Rates Of Concentration Fluctuations In Dispersing Plumes

A simple analytical model is developed for the meanupcrossing rate of plume concentration fluctuations assuming that thisprocess can be well approximated by a lognormal process. The resultingexpression requires only the specification of the in-plume fluctuationintensity and in-plume Taylor micro-time scale and, hence, does notexplicitly involve the joint probability density function of theconcentration and its derivative. The analytical model provides agood fit to some field measurements of the mean upcrossing rate ina dispersing plume.     

Study on uncertainty of inversion and resolution limit in the presence of noise

This study analyzed the uncertainty of inversion and the resolution limit in the presence of noise by means of statistical experiments. The exhaustive method is adopted to obtain the global optimal solution in each experiment. We found that even with small level of noise, solutions fluctuate in a large range for the thin bed. The distribution of solutions in the presence of noise is closely related to the spread of the cost function in the absence of noise. As a result, the area of a certain neighborhood around the true solution on the spread of the cost function in the absence of noise is used to evaluate the uncertainty of inversion and the resolution limit in the presence of noise. In the case that the SNR (signal-to-noise ratio) is 5 in this study, solutions focus around the true solution with a very small uncertainty only when the bed thickness is greater than the reciprocal of the double predominant frequency of the convoluting wavelet.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Tectonics of southwestern Mexico,isotopic evidence,nuclear Central America,Late Cretaceous break up

In the paleogeographic reconstruction of Mexico and northern Central America, an ever-increasing amount of evidence shows that the entire region is a collage of suspect terranes transported from abroad, whose timing and sense of motion are now beginning to be understood. Among these, the Chortis block (nuclear Central America) and the Baja California Peninsula have been proposed as pieces of continent separated from the Pacific coast of southwestern Mexico, that have moved either southeastward by the Farallon plate or northwestward by the Kula plate. Previous studies mainly confined to the northern margin of the Chortis block, confirmed a left-lateral displacement of 130 km in Neogene time. Further studies made northwestward along the Mexican coast provided a better understanding of magmatic and metamorphic processes in the area, and suggested times of detachment increased to 30 Ma, 40 Ma, and 66 Ma. The pre-detachment westernmost position of the block has changed, depending on the model chosen, from Puerto Vallarta and beyond, to the current position. Here we show that the isotopic mineral ages from coastal granites along the coast from Puerto Vallarta, Jalisco (80 Ma) to Puerto Angel, Oaxaca (11 Ma) record systematic decrease of cooling ages from NW to SE. This pattern is interpreted to result from the progressive uplift of rocks exposed at the present-day coast in that direction, such uplift occurred in response to the development of the Middle America Trench at the newly formed continental margin when the Chortis block was sliding at an average rate of 1.5 cm/year in a sinistral sense to its present position. Our results also constrain the position of the Kula-Farallon spreading axis north of Puerto Vallarta. These observations led us to conclude that several indicators point to this time and region for the onset of strike-slip drifting of the Chortis block toward its current position. Here, we also present several view points in terms of other possilble interpretations to different tectonic, geologic and isotopic data sets published recently by different authors.