长江中下游湖泊沉积物铅污染记录——以洪湖、固城湖和太湖为例

2002～2005年在长江中下游的洪湖、固城湖和太湖分别采集了沉积物柱样钻孔,测定了总有机碳（TOC）和金属元素包括Pb,Al,Fe,Ti等,并采用²¹⁰Pb和¹³⁷Cs进行了近代沉积物定年。研究结果表明,洪湖钻孔平均沉积速率为0.15cm/a,固城湖平均沉积速率在0.067cm/a,太湖平均沉积速率为0.35～0.41cm/a。根据湖泊沉积物中铅元素与参考元素（Al,Fe和Ti）浓度和TOC的相关关系建立了回归方程,线性关系极显著（p<0.001）。根据回归方程获取了钻孔中铅的背景值变化,研究表明近代沉积物中金属铅不仅仅来源于自然的作用,而人类活动导致铅的累积发生时间都在20世纪70年代,从一个侧面也说明利用沉积物铅含量变化进行断代存在可能性。对太湖钻孔而言,其污染程度要高于洪湖和固城湖。研究结果表明近30年来洪湖和固城湖人为造成湖泊沉积物铅累积量在不断增加,其沉积物铅污染有进一步加重的趋势,应受到科学家和管理部门的关注。     

华北安鹤煤田煤储层特征与煤层气有利区分布

通过对安鹤煤田采集煤样的煤质、显微组分、煤相、显微裂隙分析,等温吸附、低温氮比表面及孔隙结构和压汞孔隙结构测试,研究了该区煤层气赋存的地质条件、煤层气生气地质特征和煤储层物性特征。并采用基于G IS的多层次模糊数学评价方法计算了该区的煤层气资源量,预测了煤层气有利区分布。研究结果表明,该区煤层气总资源量为1 115.73×108m3,煤层气资源丰度平均为1.18×108m3/km2,具有很好的煤层气资源开发潜力。在煤田中部的四矿到八矿之间的地区以及北部的水冶镇附近地区,煤层累计有效厚度大、煤层气资源丰度高、煤层埋深适中、煤储层孔裂隙系统发育、渗透性高,是该区煤层气勘探开发的最有利目标区。     

基于GIS的北京市生态环境质量监测与分析

以2006年TM、SPOT 4及QuickBird遥感影像为信息源,在地理信息系统与遥感技术的支持下,结合野外调查及其它辅助数据,运用生态环境状况评价技术规范,对北京市2006年的生态环境质量进行评价,并对2000年与2006年北京市生态环境变化进行动态分析.结果表明: 2006年北京市生态环境质量评价指数为59.707,处于良好等级;2000～2006年间,北京全市生态环境状况稳定保持在"良"的状态,总体变化不大,但北京市耕地面积减少了339.09 km2,城镇建设用地增加了285.24 km2,水域面积减少了118.98 km2,其主要原因是降水量的减少、城市化扩张以及人为因素影响.     

南黄海北部前陆盆地的构造演化与油气突破

南黄海北部盆地是我国近海海域中唯一由中生代陆-陆碰撞造山作用形成的前陆盆地。其构造演化经历了4个阶段:(1)前造山期大陆边缘盆地阶段(Z—T2);(2)苏鲁造山带晚期前陆盆地阶段(J3—K);(3)造山期后陆内断陷盆地阶段(K2t—E);(4)区域沉降覆盖阶段(N—Q)。对其中陆内断陷盆地的详细调查研究结果表明,盆地内晚白垩世泰州组烃源岩发育,具有4套储盖组合,圈闭构造多,成藏配套条件好,计算其石油资源量约20×108t,是当前在南黄海获取油气重要突破的首选区域。     

人工神经网络在白云岩类型识别中的应用

利用地球化学数据,运用人工神经网络方法对美国密苏里州东南Ｂｏｎｎｅｔｅｒｒｅ组（寒武纪）滨海相的白云岩进行了分类、识别,判别率达１００％,结果表明,该方法性能良好,可望成为岩石分类、判别的有效手段。     

含矿预测的人工神经网络方法

运用神经网络模型的一典型模型——“反向传播”模型的改进形式,处理矿产资源统计预测问题,得出与数量化理论Ⅱ处理极为相似的结果.     

上海城市发展的环境问题及其对策研究

上海市的发展战略;空间布局模式和环境管理是文章讨论的三个主要问题。作者认为:(1)战略设想要立足于上海的发展,“开发浦东、振兴上海、服务全国、面向世界;”(2)新的空间布局模式应为“逐步形成新的CBD,强化和完善金融和服务功能”;(3)城市发展和环境建设要协调。文章着重讨论了上海城市发展中出现的环境问题及其治理的对策和措施。     

TOWARD ESTABLISHING THE CONCEPT OF PHYSICAL URBAN AREA IN CHINA

I.IntroduchollWiulegeOgraphystudiestheterritoria1systemsabouttherelationsbforeenhumanbeingSandthenature[I4],urbanmpaphyfocusesspecificallyonthespatialoopltizationandprocessofurbanterritory,anditsinteraCtionwiti1Otherterritorialsystems.Usually,wedoresearch…     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.