Detailed paleoseismic history of the Hinagu fault zone revealed by the high-density radiocarbon dating and trenching survey across a surface rupture of the 2016 Kumamoto earthquake,Kyushu, Japan

The NE-trending Hinagu fault zone, length 81 km, is one of the major active faults in Kyushu, Japan. From north to south, it is divided into three segments based on geomorphic features and paleoseismic behavior: the Takano-Shirahata, Hinagu, and Yatsushiro Sea segments. The 2016 Kumamoto earthquake produced a 6-km-long surface rupture with a dextral strike-slip displacement on the northern part of the Takano-Shirahata segment. Surface rupture, a faint east-side-up flexure with a vertical offset of less than 8 cm, was observed near the middle of the Takano-Shirahata segment. To examine past surface-rupturing earthquakes on the Takano-Shirahata segment, including rupture frequency and timing, we conducted a paleoseismic study with boring and trenching at Yamaide. A trench across the surface rupture exposed multiple fault strands associated with multiple surface-rupturing events that deformed several strata of fine-grained sediments. By structural and stratigraphic interpretation, high-density radiocarbon dating and tephra analysis, and Bayesian modeling, we constrained the timing of seven events, Events 1–7, to 0.84–1.25, 1.31–7.06, 9.99–11.0, 10.8–12.1, 12.0–13.0, 14.2–15.1, and before 14.8 kcal BP. Slip during Events 1–6 was obviously larger than the 2016 slip. The estimated average recurrence interval was about 2596–2860 years, but the interval between Events 2 and 3 was much longer than other intervals. Moreover, the vertical throw associated with Event 2 was larger than that of other events. This implies that the Takano-Shirahata segment has a period with rare larger earthquakes and a period with frequent smaller earthquakes. Some events might have produced ruptures on both the Takano-Shirahata and the northern part of the Hinagu segments simultaneously or in a short time. The variety of recurrence intervals suggests that the seismic activity has been affected by one or both activities of the Futagawa fault zone and the Hinagu segment.     

Geochemical characteristics of deposits from the 2011 Tohoku‐oki tsunami at Hasunuma,Kujukuri coastal plain,Japan

We examined the geochemical characteristics and temporal changes of deposits associated with the 2011 Tohoku‐oki tsunami. Stable carbon isotope ratios, biomarkers, and water‐leachable ions were measured in a sandy tsunami deposit and associated soils sampled at Hasunuma, Kujukuri coastal plain, Japan, in 2011 and 2014. At this site, the 2011 tsunami formed a 10–30 cm ‐thick layer of very fine to medium sand. The tsunami deposit was organic‐poor, and no samples contained any detectable biomarkers of either terrigenous or marine origin. In the underlying soil, we identified hydrocarbons and sterols derived from terrestrial plants, but detected no biomarkers of marine origin. In the samples collected in 2011, concentrations of tsunami‐derived water‐leachable ions were highest in the soil immediately beneath the tsunami deposit and then decreased gradually with depth. Because of its finer texture and higher organic content, the soil has a higher water‐holding capacity than the sandy tsunami deposit. This distribution suggests that ions derived from the tsunami quickly penetrated the sand layer and became concentrated in the underlying soil. In the samples collected in 2014, concentrations of water‐leachable ions were very low in both soil and sand. We attribute the decrease in ion concentrations to post‐tsunami rainfall, seepage, and seasonal changes in groundwater level. Although water‐leachable ions derived from seawater were concentrated in the soil beneath the tsunami deposit following the tsunami inundation, they were not retained for more than a few years. To elucidate the behavior of geochemical characteristics associated with tsunamis, further research on organic‐rich muddy deposits (muddy tsunami deposits and soils beneath sandy tsunami deposits) as well as sandy tsunami deposits is required.     

Aerodynamic Scaling for Estimating the Mean Height of Dense Canopies

We used an aerodynamic method to objectively determine a representative canopy height, using standard meteorological measurements. The canopy height may change if the tree height is used to represent the actual canopy, but little work to date has focused on creating a standard for determining the representative canopy height. Here we propose the ‘aerodynamic canopy height’ h _a as the most effective means of resolving the representative canopy height for all forests. We determined h _a by simple linear regression between zero-plane displacement d and roughness length z ₀, without the need for stand inventory data. The applicability of h _a was confirmed in five different forests, including a forest with a complex canopy structure. Comparison with stand inventory data showed that h _a was almost equivalent to the representative height of trees composing the crown surface if the forest had a simple structure, or to the representative height of taller trees composing the upper canopy in forests with a complex canopy structure. The linear relationship between d and z ₀ was explained by assuming that the logarithmic wind profile above the canopy and the exponential wind profile within the canopy were continuous and smooth at canopy height. This was supported by observations, which showed that h _a was essentially the same as the height defined by the inflection point of the vertical profile of wind speed. The applicability of h _a was also verified using data from several previous studies.     

Palaeoenvironmental reconstruction of the Oligocene Afales Basin, Ithaki island, western Greece

Assemblages of benthic foraminifera from one clastic succession in the Afales Basin (Ithaki Island, western Greece) were investigated to reconstruct palaeoenvironmental conditions during the Oligocene. The section consists of alternating hemipelagic marls and detrital deposits, designated as flysch-like beds, attributed to biostratigraphic Zones P20 and P21. Planktic percentages are mostly high (66–80%). Benthic foraminiferal assemblages comprise calcareous and agglutinated taxa (up to 15%). The prevalence of epifaunal foraminifera indicates good ventilation of the bottom water resulting from basin morphology, which enabled the undisturbed flow of water throughout the basin. Palaeodepth estimates imply bathyal deposition, from about 800 to 1200 m deep. The benthic foraminiferal fauna is of high diversity along the section, as is expected in deep marine environments. The abundances of the most common foraminiferal taxa (Cibicidoides spp., Oridorsalis umbonatus, Gyroidinoides spp., Stilostomella spp., Nodosariidae, Nuttallides umbonifera) are quite variable and imply generally oligotrophic to mesotrophic environmental conditions with variable organic flux.     

Relationship between growth of albite porphyroblasts and deformation in a sambagawa schist, Central Shikoku, Japan

Albite porphyroblasts in a basic schist of the Sambagawa metamorphic belt (Besshi—Bashi, Central Shikoku) show zonal variation of inclusions defined by inclusion-free mantles and inclusion-rich cores, though matrix minerals are partly incorporated in the outer zones of the mantles. From comparison of the crystallographic and dimensional fabrics of inclusion and matrix epidote, it has been concluded that the orientation of the principal axes of strain was different for the deformation of matrix fabrics and inclusion fabrics (fabrics produced before formation of cores). Inclusion amphibole in the cores belongs to the actinolite—common hornblende group, with Si content more than 7.0, whereas amphibole in the matrix and outer zones of mantles belongs to the common hornblende group, with Si content less than 7.1. This shows that the metamorphic temperature was higher during the phase of formation of the outer zones of the mantles than during that of the cores. The average direction of maximum growth of the mantles, which has been estimated from differences between the average shapes of porphyroblasts and those of cores, is parallel to the linear orientation of amphibole and epidote in the matrix. The average direction of minimum growth of the mantles coincides with the normal to the schistosity of the matrix. The mantles appear to be of the same generation as the matrix fabrics.     

Interpretation of trace element and isotope features of basalts: relevance of field relations, petrology, major element data, phase equilibria, and magma chamber modeling in basalt petrogenesis

The concentrations and ratios of the major elements determine the physical properties and the phase equilibria behavior of peridotites and basalts in response to the changing energy contents of the systems. The behavior of the trace elements and isotopic features are influenced in their turn by the phase equilibria, by the physical character of the partial melting and partial crystallization processes, and by the way in which a magma interacts with its wall rocks. Concentrating on the trace element and isotope contents of basalts to the exclusion of the field relations, petrology, major element data, and phase equilibria is as improvident as slaughtering the buffalo for the sake of its tongue. The crust is a cool boundary layer and a density filter, which impedes the upward transfer of hot, dense “primary” picritic and komatiitic liquids. Planetary crusts are sites of large-scale contamination and extensive partial crystallization of primitive melts striving to escape to the surface. Escape of truly unmodified primitive melts to the surface is a rare event, requiring the resolution of daunting problems in chemical and mechanical engineering. Primary status for volumetrically abundant basalts such as mid-ocean ridge basalt, ocean island basalt, and continental flood basalts is denied by their low-pressure cotectic character, first remarked upon on petrological grounds in 1928 and on experimental grounds in 1962. These basalt liquids are products of crystal-liquid separation at low pressure. Primary status for these common basalts is further denied by the phase equilibria of such compositions at elevated pressures, when the required residual mantle mineralogy (magnesian olivine and orthopyroxene) is not stable at the liquidus. It is also denied by the picritic or komatiitic nature of partial melts of candidate upper-mantle compositions at high pressures—a conclusion supported by calculation of the melt composition, which would need to be extracted in order to explain the chemical variation between fertile and residual peridotite in natural ultramafic rock suites. The subtleties of magma chamber partial crystallization processes can produce an astounding array of “pseudospidergrams,” a small selection of which have been explored here. Major modification of the trace element geochemistry and trace element ratios, even those of the highly incompatible elements, must always be entertained whenever the evidence suggests the possibility of partial crystallization. At one extreme, periodically recharged, periodically tapped magma chambers might undergo partial crystallization by ∼95% consolidation of a succession of small packets of the magma. Refluxing of the 5% residual melts from such a process into the main body of melt would lead to eventual discrimination between highly incompatible elements in that residual liquid comparable with that otherwise achieved by 0.1 to 0.3% liquid extraction in equilibrium partial melting. Great caution needs to be exercised in attempting the reconstruction of more primitive compositions by addition of troctolite, gabbro, and olivine to apparently primitive lava compositions. Special attention is focussed on the phase equilibria involving olivine, plagioclase (i.e., troctolite), and liquid because a high proportion of erupted basalts carry these two phases as phenocrysts, yet the equilibria are restricted to crustal pressures and are only encountered by wide ranges of basaltic compositions at pressures less than 0.5 GPa. The mere presence of plagioclase phenocrysts may be sufficient to disqualify candidate primitive magmas. Determination of the actual contributions of crustal processes to petrogenesis requires a return to detailed field, experimental, and forensic petrologic studies of individual erupted basalt flows; of a multitude of cumulate gabbros and their contacts; and of upper-mantle outcrops.     

Two efficient algorithms for iterative linearized inversion of seismic waveform data

We present two equivalent algorithms for iterative linearized waveform inversion for 3-D Earth structure with respect to an arbitrary 3-D starting model; one is a matrix formulation, and the second is a wavefield formulation. Both algorithms require the computation of accurate synthetic seismograms, but neither requires that any particular method be used to compute the synthetics. The matrix formulation is equivalent to our previously published algorithm (Hara, Tsuboi & Geller 1991), but requires less than 10 per cent of the CPU time of the previous algorithm. The wavefield algorithm is equivalent to that of Tarantola (1986) and Mora (1987), but appears to be substantially more efficient.     

The characterization and distribution of aerosol and gaseous species in the winter monsoon over the western pacific ocean

During the winters of 1981 and 1982, measurements were taken on two Japanese islands of the aerosol and gaseous species which had been carried by northwesterly monsoons over the Pacific Ocean. The aerosols were characterized as sea-salt particles; soil particles, and as particles of sulfate, nitrate, organics and elemental carbon. At Chichi-jima island, which is about 800 km away from the main islands of Japan, it was found that the level of the anthropogenic components of the aerosols was considerably higher than their background level. The mean concentrations of the species on the islands are given in tabular forms. According to a survey made on board a ferry boat, the aerosol and gaseous species were fairly uniformly distributed along the southern coast of the main Japanese islands.     

Style of fluid flow and deformation in and around an ancient out-of-sequence thrust: An example from the Nobeoka Tectonic Line in the Shimanto accretionary complex, Southwest Japan

To understand the characteristics of deformation of an out-of-sequence thrust (OST) and the style of fluid flow along it, we investigated the Nobeoka Tectonic Line, which has been interpreted as a deep OST (7–9 km), in the Shimanto accretionary complex, Southwest Japan. The shear zone in the footwall differs significantly in the along-strike direction not only in thickness, which varied from 100 to 300 m, but also in lithology and mineral vein development. These variations might reflect primarily differences in lithology; that is, the sandstone-dominant shear zone with a large amount of mineral veins precipitated in microcracks is relatively thick, whereas the shale-dominant shear zone with a small amount of veins and with textures indicating highly pressurized pore fluid, is thinner. By comparison with characteristics of a shallow OST (3–5 km), we conclude that the shallow OST has experienced repeated brittle failure with rapid slip and focused fluid flow whereas the deep OST has experienced both brittle and ductile deformation, followed by fluid flow of various styles, depending on the lithology.