Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.     

Diurnal Variation of Gravity Wave Activity at Midlatitudes in the Ionospheric F Region

We investigate the short-term fluctuations in the period range from 15 to 180 minutes in the electron density variations of the F region ionosphere. Electron density profiles obtained at the ionospheric stations of Pruhonice (49.9° N, 14.5° E) and Ebro (40.8° N, 0.5° E) at five minute time sampling have been used for this analysis. The diurnal changes of the activity of the acoustic gravity wave fluctuations (AGW) show a clear enhancement during and several hours after sunrise. The periods of such AGW's are about 60 to 75 minutes and these waves propagates vertically through the ionosphere from a source located at an altitude of 180-220 km. The most likely source for these events seems to be passage of the Solar terminator.     

Research on red tide occurrences using enclosed experimental ecosystems in west Xiamen Harbor, China—Relationship between various factors and red tide occurrences

A series of enclosed ecosystem experiments were conducted in a land-based tank near the seaside of West Xiamen Harbor. The results of experiments conducted in different seasons and years showed a repeatable phytoplankton succession. In this relatively stable ecosystem with added nutrients and trace metals, diatoms dominated initially, dinoflagellates dominated in the later stage, and dinoflagellate red tides eventually occurred. Vitamin B₁₂ enrichment may speed up this succession process. Stirring the water column could stop this process. Soluble Mn at a level of 3–4 μg/L in seawater, which also is the existing concentration of soluble Mn in Xiamen Harbor seawater, is sufficient for the multiplication of algae and occurrence of red tide. The present study showed that excessive soluble Mn in Xiamen Harbor cannot cause red tide, and that Fe was one of the important factors causing diatiom red tide in this present study. Project 39570145 supported by NSFC.     

THE MULTIPLICITY PRINCIPLE IN MODERN REMOTE SENSING METHODS AND ITS APPLICATION TO AGRICULTURAL IMAGE INTERPRETATION

The authors elaborate upon the “multiplicity principle” in remote sensing, i.e., the need for repeated imaging at a variety of scales, spatial resolutions, spectral bands, and times of imaging in order to attain the maximum information possible. They then explore the ways it can be applied in agricultural research, through two different image comparison and interpretation strategies. A detailed example is presented of the use of a multitemporal imaging strategy for the recognition of several agricultural crops from false color composite imagery. Translated by Edward Torrey, Alexandria, VA 22308 from: G. V. Dobrovol'skiy and V. L. Andronikov, eds., Aerokosmicheskiye metody v pochvo-vedenii i ikh ispol'zovaniye v sel'skom khozyaystve: sbornik nauchnykh trudov [Remote Sensing Methods in Soil Science and Their Utilization in Agriculture: A Collection of Scientific Works]. Moscow: Nauka, 1990, pp. 47-55.     

Classifying zones of suitability for manual drilling using textural and hydraulic parameters of shallow aquifers: a case study in northwestern Senegal

A method is proposed that uses analysis of borehole stratigraphic logs for the characterization of shallow aquifers and for the assessment of areas suitable for manual drilling. The model is based on available borehole-log parameters: depth to hard rock, depth to water, thickness of laterite and hydraulic transmissivity of the shallow aquifer. The model is applied to a study area in northwestern Senegal. A dataset of boreholes logs has been processed using a software package (TANGAFRIC) developed during the research. After a manual procedure to assign a standard category describing the lithological characteristics, the next step is the automated extraction of different textural parameters and the estimation of hydraulic conductivity using reference values available in the literature. The hydraulic conductivity values estimated from stratigraphic data have been partially validated, by comparing them with measured values from a series of pumping tests carried out in large-diameter wells. The results show that this method is able to produce a reliable interpretation of the shallow hydrogeological context using information generally available in the region. The research contributes to improving the identification of areas where conditions are suitable for manual drilling. This is achieved by applying the described method, based on a structured and semi-quantitative approach, to classify the zones of suitability for given manual drilling techniques using data available in most African countries. Ultimately, this work will support proposed international programs aimed at promoting low-cost water supply in Africa and enhancing access to safe drinking water for the population.     

Geology and petroleum potential of the Fairway Basin in the Tasman Sea

The Fairway Basin is a large, generally north – south-trending, sediment-filled structure in water 1500 – 3000 m deep, on the eastern slope of the Lord Howe Rise in the Tasman Sea, and is partly within Australian jurisdiction. It was poorly known until a few years ago, when seismic profiling and piston coring cruises were carried out. The basin, about 1100 km long and 120 – 200 km wide, can be divided into three segments—north, central and south—that trend northwest, north and north-northwest, respectively. All three segments probably formed by thinning of continental crust during breakup of Lord Howe Rise and surrounding aseismic continental ridges in the Late Cretaceous and Paleocene. Normal faulting, large inputs of terrigenous sediment and subsidence to bathyal marine depths occurred during that time. A period of compression, perhaps related to overthrusting on New Caledonia, occurred in the Eocene, leading to uplift (and in parts, erosion) of northern Lord Howe Rise, and reversal of faulting in the basin. By the Oligocene, the area was again in bathyal depths, and pelagic ooze and some turbidites accumulated. The basinal sequence is generally 2000 – 4000 m thick, with 1200 – 3200 m of Cretaceous to Eocene sediment concentrated in depocentres, capped by 500 – 800 m of Oligocene and younger sediment. In the depocentres, numerous sedimentary diapirs pierce sedimentary sequences. The sedimentary diapirs appear to be fed by Cretaceous muds deposited during rifting. Often, these diapirs are overlain by faults extending to the seafloor, and hummocky bathymetry is possibly caused by fluid escape. The overall geology suggests that the Fairway Basin may be a large frontier hydrocarbon province. Seismic profiles display a bottom-simulating reflector above many depocentres, 500 – 700 m below the seafloor. The bottom-simulating reflector has positive polarity, which could result from a diagenetic phase transformation, a thin gas hydrate layer with a sharp top, or from the sharp base of a gas layer (probably beneath gas hydrates). Standard piston cores taken above diapirs and apparent fluid-escape features have recovered little gas. Other than drilling, the next steps in assessing petroleum potential are to clearly document fluid-escape structures, and to sample any fluids emitted for hydrocarbons.     

Martian water vapor: Mars Express PFS/LW observations

We present the seasonal and geographical variations of the martian water vapor monitored from the Planetary Fourier Spectrometer Long Wavelength Channel aboard the Mars Express spacecraft. Our dataset covers one martian year (end of Mars Year 26, Mars Year 27), but the seasonal coverage is far from complete. The seasonal and latitudinal behavior of the water vapor is globally consistent with previous datasets, Viking Orbiter Mars Atmospheric Water Detectors (MAWD) and Mars Global Surveyor Thermal Emission Spectrometer (MGS/TES), and with simultaneous results obtained from other Mars Express instruments, OMEGA and SPICAM. However, our absolute water columns are lower and higher by a factor of 1.5 than the values obtained by TES and SPICAM, respectively. In particular, we retrieve a Northern midsummer maximum of 60 pr-μm, lower than the 100-pr-μm observed by TES. The geographical distribution of water exhibits two local maxima at low latitudes, located over Tharsis and Arabia. Global Climate Model (GCM) simulations suggest that these local enhancements are controlled by atmospheric dynamics. During Northern spring, we observe a bulge of water vapor over the seasonal polar cap edge, consistent with the northward transport of water from the retreating seasonal cap to the permanent polar cap. In terms of vertical distribution, we find that the water volume mixing ratio over the large volcanos remains constant with the surface altitude within a factor of two. However, on the whole dataset we find that the water column, normalized to a fixed pressure, is anti-correlated with the surface pressure, indicating a vertical distribution intermediate between control by atmospheric saturation and confinement to a surface layer. This anti-correlation is not reproduced by GCM simulations of the water cycle, which do not include exchange between atmospheric and subsurface water. This situation suggests a possible role for regolith-atmosphere exchange in the martian water cycle.     

Non-symmetrical levee breaching processes in a channel bend due to overtopping

A series of experiments were done to reveal the overtopping breaching process of non-cohesive and cohesive levees in a U-bend flume. The flood hydrograph and breaching geometry were measured and analyzed in detail. The results show that the levee breaching processes can be briefly divided into four stages: slope erosion, longitudinal headward gully-cutting, lateral erosion, and relative stabilization. For non-cohesive levees, non-symmetrical lateral development of the breach occurs throughout the four stages, and the final non-symmetrical coefficient is approximately 2.2–2.6. Larger flow discharge or higher water level can accelerate the breaching process, while coarser sands tend to accelerate the process initially but depress the process at the end. The fluvial erosion rate of a non-cohesive breach shows a power-function relation with the excess wall shear stress. For cohesive levees, a plateau forms in the breach partially blocking the flow in the first two stages. The breach flow is approximately perpendicular to the levee body, and, thus, the erosion rates of the two breach sides are almost the same. Non-symmetrical lateral development mainly occurs in the third stage when the deep gully forms. The final non-symmetrical coefficient is approximately 2.7–3.3. It is expected that these findings can provide a valuable experimental dataset and a theoretical basis for breach closure and flood alleviation.     

Evolution of polycyclic alkanes in the Espirito Santo Basin

The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C₂₇ 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin.