X荧光光谱分析技术在测定安徽月山矿床铁铜矿石中Fe、Cu的应用研究

为建立符合安徽月山矿区的X荧光光谱(XRF)分析方法,针对矿区铁矿、铜矿的特点,用铁、铜矿石的国家标准物质制作系列校准样片,通过粉末压片和玻璃熔融两种制样方法,波长色散X荧光光谱法测定主矿体样品中的Fe、Cu等主量元素,并将测定结果与传统化学方法分析结果进行比较。结果显示,熔片法-XRF的测定结果与化学容量法测定结果一致,试样在850℃灼烧,按40∶1大稀释比熔融制样,解决了样品在高温熔融过程中对铂黄坩埚的腐蚀,适用于月山矿区铁铜矿样品中Fe、Cu的测定。粉末压片法不能克服矿物效应和粒度效应的影响,测定结果与化学容量法结果比对偏差较大,不适用于月山地区铁铜矿中Fe、Cu的测定。     

LOQUAT: an open-source GPU-accelerated SPH solver for geotechnical modeling

Acta Geotechnica - Smoothed particle hydrodynamics (SPH) is a meshless method gaining popularity recently in geotechnical modeling. It is suitable to solve problems involving large deformation,...     

广利河口拦门沙发育动态和河口航道的选择

根据现场调查和历史资料,获取了广利河口拦门沙水动力特征、海底地形和底质特征,对拦门沙的动态发育和波浪作用下拦门沙运动状态进行了分析,探讨了广利河口的航道选择方案。分析结果认为,广利河槽外航道宜从东偏南向入海。     

A motion planning algorithm for the feed support system of FAST

The paper relates to a motion planning algorithm for the feed support system of the Five-hundred-meter Aperture Spherical radio Telescope(FAST).To enhance the stability of the feed support system,the start/termination planning segments are adopted with an acceleration and deceleration section.The source switching planning adopts a combination of a line segment and focal segment to realize stable control of the feed support system.Besides,during the observation trajectory,a transition segment which is not used for observation data is planned with a required time.Through an example simulation,a smooth change is realized via the motion planning algorithm and presented in this paper.     

High‐T and low‐P metamorphism in the Xilingol Complex of central Inner Mongolia,China: An indicator of extension in a previous orogeny

The Xilingol Complex comprises biotite gneisses and amphibolite interlayers with extensive migmatization. Four representative samples were documented and found to record either two or three metamorphic stages. Phase modelling using thermocalc suggests that the observed assemblages represent the final stages that underwent cooling from temperature peaks, and are consistent with a fluid‐absent solidus in P–T pseudosections. Their P–T conditions are further constrained to be 5–6 kbar/680–725°C and 4–5 kbar/650–680°C for two garnet‐bearing gneiss samples, 4–5 kbar/660–730°C for a cordierite‐bearing gneiss sample, and 4–5 kbar/680–710°C for an amphibolite sample based on mineral composition isopleths, involving measured Mg content in biotite, anorthite in plagioclase, grossular and pyrope in garnet and Ti content in amphibole. The peak temperature conditions recovered are 760–790°C or >760°C at 5–6 kbar based on the composition isopleths of plagioclase, biotite, garnet and especially the comparison of melt contents between the calculated and observed. A pre‐peak heating process with slight decompression can be suggested for some samples on the basis of the core–rim increase in the plagioclase anorthite, and the stability of ilmenite. Zircon U–Pb dating using the LA‐ICP‐MS method provides systemic constraints on the metamorphic ages of the Xilingol Complex to be 348–305 Ma, interpreted to represent the post‐peak cooling stages. Moreover, metagabbroic dykes that intruded into the Xilingol Complex yield 317 ± 3 Ma from magmatic zircon, and are considered to have played a significant role for heat advection triggering the high‐T and low‐P metamorphism. Thus, the clockwise P–T paths involving pre‐peak heating, peak and post‐peak cooling recovered for the Xilingol Complex are consistent with an extensional setting in the Carboniferous that developed on a previous orogen in response to addition of mantle‐derived materials probably together with upwelling of the asthenospheric mantle.     

规则格网DEM局地坡面凸凹性精度分析

DEM地表形态精度分析理论与方法的建立,对DEM数据的生产和广泛应用具有重要意义。本文从局地坡面形态的凸凹性角度,剖析规则格网DEM格网点位置、格网分辨率对DEM局地坡面凸凹性的影响,以期进一步完善和发展DEM质量分析的理论与方法。论文首先阐述了DEM局地坡面凸凹性的基本概念,研究建立了规则格网DEM的局地坡面凸凹性量化分析方法,并以黄土丘陵5、10、15、25、……、155 m DEM为例,采用比较分析方法研究了局地坡面凸凹性随DEM格网点位置和格网分辨率的变化特征。研究表明:对于本研究中的1:5万DEM,10 m(跃变率≤0.3%)是其最佳的格网分辨率阈值,当DEM实际格网分辨率高于该阈值时,实际DEM与最佳格网分辨率DEM具有近乎相同的局地坡面凸凹性,主要在正地形与负地形的过渡区域会发生不同程度的坡面凸凹性变化;当DEM实际格网分辨率低于该阈值时,实际DEM的局地坡面凸凹性,会随着DEM格网点布设位置和DEM格网分辨率发生较大的不确定性变化。     

地理国情普查数据支持下的人口空间化方法

针对传统的人口空间化方法存在数据源多、模型复杂、忽视居住建筑类型的影响等问题,提出了一种以居住建筑作为人口分布参考的人口空间化方法。在地理国情普查数据的支持下,文章选取株洲市境内的18个乡镇为研究区。首先,将研究区内的居住建筑重分类为多层房屋、低矮房屋和废弃房屋,采用最小二乘法求算各类居住建筑的居住密度。然后,根据各乡镇人口估计值的相对误差对各乡镇各类居住建筑的居住密度进行修正。最后,运用GIS的叠加分析技术得到250m格网人口密度图。检验结果表明,人口估计值与人口统计值的线性拟合斜率为0.965,另外基于居住建筑重分类的人口空间化方法使得人口估计精度较未重分类时有了明显提高。     

基于天绘卫星影像的困难地区地形图测制方法

介绍了基于天绘影像的困难地区地形图测制技术,针对困难地区地形图的特点,分析影响地形图测制的因素,总结了提高困难地区地形图成果质量的方法。     

赣南生态屏障区林地时空变化分情景模拟

基于2000年和2010年土地利用遥感数据,从自然、区位、交通、人口和经济4个角度选取驱动因子,利用Logistic-CA-Markov土地利用综合模型预测赣南森林有林地、灌木林、疏林地和其它林地4种林地类型在当前模式、规划模式和保护模式3种情景下的空间演变格局。结果表明：① 到2020年,在当前模式和规划模式,林地总面积将减少,在保护模式则出现增加,3种情景都体现出有林地和其它林地增加、疏林地和灌木林缩减的趋势,只是增减幅度不同,但不论何种情形林地的组成结构都将发生较大程度的变化;② 3种情景都是以疏林地→有林地、有林地→其它林地和灌木林→有林地这3种类型的转化为主,向有林地的转化分布都比较分散,而向其它林地的转化却集中在安远、信丰、于都、赣县四县交界处;③ 相较于当前模式,在规划模式下集中在安远县及其周边的有林地向其它林地的转化出现大量缩减,在保护模式下这种缩减更加明显。