A suite of ultramafic and mafic rocks from the lower, critical and lower portion of the main zones of the Bushveld Complex has been analysed for Th, Cs, Zr, Ni, Cr and Au by INAA and XRF spectrometry. The incompatible elements Th, Cs, and Zr correlate positively, and show a gradual upward increase in abundance. Assuming constant average proportion of intercumulus material, this upward increase implies that the zones of the Complex studied represent crystallization of a single magma type some 3600 m thick. Pyroxenites dominate the lower portion of the section studied and their Ni content shows an initial rapid decrease from 850 ppm in the lowermost rocks, to around 500 ppm, with considerable scatter. This distribution is most likely to have resulted from bottom crystallization with superimposed convective overturn near the transient floor of the chamber. Gold abundances are generally higher in chromitites, and correlate positively with Ni, indicating the presence of significant amounts of cumulus immiscible sulphide. In the silicate rocks, Au does not correlate with any of the analysed elements, and it is concluded that Au was trapped in small quantities of immiscible sulphide which precipitated continuously during crystallization. There is an upward increase in the amount of cumulus immiscible sulphide, indicating a progressive increase in sulphur solubility in the magma. 相似文献
This study aims to elaborate on the mineral potential maps using various models and verify the accuracy for the epithermal gold (Au) — silver (Ag) deposits in a Geographic Information System (GIS) environment assuming that all deposits shared a common genesis. The maps of potential Au and Ag deposits were produced by geological data in Taebaeksan mineralized area, Korea. The methodological framework consists of three main steps: 1) identification of spatial relationships 2) quantification of such relationships and 3) combination of multiple quantified relationships. A spatial database containing 46 Au-Ag deposits was constructed using GIS. The spatial association between training deposits and 26 related factors were identified and quantified by probabilistic and statistical modelling. The mineral potential maps were generated by integrating all factors using the overlay method and recombined afterwards using the likelihood ratio model. They were verified by comparison with test mineral deposit locations. The verification revealed that the combined mineral potential map had the greatest accuracy (83.97%), whereas it was 72.24%, 65.85%, 72.23% and 71.02% for the likelihood ratio, weight of evidence, logistic regression and artificial neural network models, respectively. The mineral potential map can provide useful information for the mineral resource development. 相似文献
In order to understand sequence development and sea-level fluctuations during the late Middle Cambrian to early Furongian on the North China epeiric platform, the present study focuses on a unique, subtle erosion surface of an extensive (approx. 100 km), strongly deformed limestone bed in the uppermost part of the Gushan Formation, Shandong Province, China. The Gushan Formation and the overlying Chaomidian Formation consist mainly of shales and a variety of carbonates that were deposited in subtidal environments (e.g., deep subtidal, shallow subtidal, shoreface/shoal, subtidal microbial flat, and restricted platform interior). Three third-order depositional sequences (S1–3) are identified, each of which comprises a thin transgressive systems tract (TST) and a relatively thick highstand systems tract (HST). Each sequence is bounded by a drowning unconformity (SB1), a subaerial unconformity (SB2), or a surface of submarine erosion (SB3). The upper sequence boundary (SB2) of sequence 1 (S1) is represented by a subtle erosion surface of an extensive, deformed limestone bed with a wide variety of soft-sediment deformation structures (e.g., lime mudstone breccias, chaotic wacke-packstone laminae and fragments, homogenized oolites, and clastic dykes), and is overlain by small sporadic microbial buildups and an extensive bioclastic grainstone bed. The deformed limestone was formed during early diagenesis by differential deformation processes (brecciation, liquefaction/fluidization, and injection) which were most likely induced by pore-water overpressure during the period of rapid sea-level fall. Despite the lack of subaerial exposure features (e.g., paleokarst, paleosol, etc.), the characteristics of the erosion surface (cutting well-lithified sediment below), the missing of a significant geological record (the Prochuangia biozone), and the worldwide correlatable positive carbon isotope excursion collectively indicate that the erosion surface developed under conditions of subaerial exposure after contemporaneous marine cementation of the deformed sediment. The missing of the Prochuangia biozone is most likely due to non-deposition at a subaerial hiatal surface. The erosion surface was submerged as a result of subsequent rise in sea level, where sporadic microbial buildups formed under suitable conditions. Freshly deposited, winnowed, shell-dominated transgressive lag deposits (containing Chuangia trilobite fragments, brachiopod shells, and abundant glauconite grains) formed with continued rise in sea level, which became, in turn, overlain by shale-dominated facies. The unique combination of the subtle erosion surface (sensu stricto a subaerial unconformity) and the underlying deformed limestone bed provides an important criterion for recognizing the subtle changes in relative sea level on shallow epeiric platforms. 相似文献
Natural Hazards - Future storm-induced inundation risks were assessed by performing storm surge modeling based on Typhoon Maemi (2003) under the generic climate change scenarios proposed by IPCC... 相似文献
We study and compare five different combinations of finite element spaces for approximating the coupled flow and solid deformation system, so-called Biot’s equations. The permeability and porosity fields are heterogeneous and depend on solid displacement and fluid pressure. We provide detailed comparisons among the continuous Galerkin, discontinuous Galerkin, enriched Galerkin, and two types of mixed finite element methods. Several advantages and disadvantages for each of the above techniques are investigated by comparing local mass conservation properties, the accuracy of the flux approximation, number of degrees of freedom (DOF), and wall and CPU times. Three-field formulation methods with fluid velocity as an additional primary variable generally require a larger number of DOF, longer wall and CPU times, and a greater number of iterations in the linear solver in order to converge. The two-field formulation, a combination of continuous and enriched Galerkin function space, requires the fewest DOF among the methods that conserve local mass. Moreover, our results illustrate that three out of the five methods conserve local mass and produce similar flux approximations when conductivity alteration is included. These comparisons of the key performance indicators of different combinations of finite element methods can be utilized to choose the preferred method based on the required accuracy and the available computational resources.
Five species, Lipopora lissa Jell and Jell, 1976, Lipopora daseia Jell and Jell, 1976, Tretocylichne perplexa Engelbretsen, 1993 from Australia, Cambroctoconus orientalis Park, Woo, Lee, Lee, Lee, Han and Chough, 2011 from China, and Cambroctoconus kyrgyzstanicus Peel, 2014 from Kyrgyzstan, belonging to the Cambrian stem-group cnidarians have been documented in the fossil record. Cambroctoconus coreaensis sp. nov., interpreted here as a stem-group cnidarian, from the Seokgaejae section in the Daegi Formation, Taebaek Group (Cambrian Series 3), Taebaeksan Basin, central-eastern Korean Peninsula, has a slender cup-shaped skeleton. A cladistic analysis produced 21 most parsimonious trees, which invariably placed the six stem-group cnidarians below the crown-group, but their relationships within the stem-group are unresolved. Nine out of the 21 trees suggest a monophyletic relationship for the Cambrian stem-group cnidarians, whereas in six other trees a monophyly of Cambroctoconus and Tretocylichne appeared as the sister-group to the crown-group cnidarians with Lipopora at the most basal branch. This result may reflect the fact that crown-group cnidarians evolved in the Precambrian, and suggests that the diversity of stem-group cnidarians was a result of an independent radiation in the Cambrian. 相似文献
In this study, the derivative analysis using the derivative of drawdown with respect to log‐time was utilized to determine candidates for hydraulic conductor domains (HCDs). At a 500‐m deep borehole in the study site, the fractured rocks crossing the borehole were first classified in fractured and nonfractured zones by core logging and geophysical loggings, such as acoustic televiewing, density, and flow loggings. After conducting the hydraulic tests such as constant head withdrawal and recovery tests at the fractured zones and the nonfractured zones, the derivative analyses were carried out, of which the results were evaluated to determine the candidates for HCDs. For the nonfractured zones, the diagnostic plot has only a big hump indicating poor connection of the background fractures to the permeable geologic media, while those of the candidates for HCDs show various flow regimes. On the basis of these results, the candidates for HCDs among the fractured zones were determined. From discussion on the results, the combination of the spacing analysis and derivative analysis following a hydraulic test is recommended for determining the candidates for HCDs rather than other geophysical loggings. 相似文献