Estimating snow distribution over a large area and its application for water resources

The spatial and temporal distribution of the snow water equivalent (SWE), snow density and snow depth were estimated by a method combining remote sensing technology and degree‐day techniques over a study area of 370 000 km². The advantages of this simulation model are its simplicity and the availability of degree‐day parameters, which can be successively evaluated by referring to snow area maps created from satellite images. This simulation worked very well for estimating SWE and helped to separate the areas of thin snow cover from heavier snowfall. However, shallow snow in warm regions led to some misjudgments in the snow area maps because of the time lag between when the satellite image was acquired and the simulation itself. Vulnerable areas, where a large variation in the amount of snow affects people's life, could be identified from the differences between heavy and light snow years. This vulnerability stems from a predicted lack of irrigation water for rice production caused by future climate change. The model developed in this study has the potential to contribute to water management activities and decision‐making processes when considering necessary adaptations to future climate change. Copyright © 2007 John Wiley & Sons, Ltd.     

A Review of the Tetrapod Track Record in China,with Special Reference to Type Ichnospecies:Implications for Ichnotaxonomy and Paleobiology

<正>"Splitting" and "lumping" are perpetual problems in vertebrate,especially dinosaur, ichnotaxonomy.Chinese dinosaur ichnotaxonomy,which began in 1940,provides a series of interesting case studies,highlighting the dual problems of historical and dubious ichnotaxonomy. Chinese Mesozoic tetrapod track types have been placed into 63 ichnospecies(one Triassic,28 Jurassic,and 34 Cretaceous),exclusive of other,non-type ichnospecies or ichnotaxa identified from China.Fifty-two(～83%) of these 63 tetrapod ichnospecies were placed in monospecific ichnogenera. At the ichnogenus level,we prune—either by recognizing nomina dubia or by synonymy—17 from the list of 53 dinosaurian ichnogenera(a 32%reduction),leaving 36 ichnotaxa that we consider valid. Most of the cuts affect Jurassic theropod ichnotaxa,which are reduced from 23 to only nine because most ichnogenera are subjective junior synonyms of Grallator and Eubrontes.Fewer Chinese Cretaceous ichnotaxa(only six of 21 ichnogenera) are obvious nomina dubia or subjective synonyms, suggesting greater east Asian endemism during this time.Because ichnospecies differences are subtle, we provisionally retain ichnospecies as valid pending detailed comparative analyses of congeneric ichnospecies.This synthesis is long overdue and is necessary to address problems of historical and provincial ichnotaxonomy,which severely hamper comparisons of tetrapod ichnofaunas in space and time.     

Moored instrument observations in the Kuroshio south of Kyushu

In each of the (fiscal) years 1979–1982, multilayer current measurements by means of moored instruments were carried out in the Kuroshio off Tanegashima Island, south of Kyushu, with particular interest in the baroclinic layer (0–1,000 m) of the intense current. Most of the moored instruments were in position for more than 30 days, the maximum duration being 145 days. This paper describes some noticeable features of the mean and fluctuation fields in the surface Kuroshio as inferred from the the new data sets.Vertical profiles of horizontal velocities show that the eastward current of the Kuroshio in the region is confined to the upper 600 m on average and below this level the mean current is directed to the southwest along the local isobaths. This is believed to be the first observation of the level of no motion in this region. It is argued that the indicated level of no motion would lead to much smaller values for the Kuroshio transport than previous values referred to the 1,000 m level — for example, earlier estimates by Nitani (1972).The fluctuation field in the upper intense current appears to be dominated by an organized motion with a time scale of about 30 days. This can be seen clearly in the time variations of water temperature and local volume transport, but less clearly in the velocity records. The horizontal transfer components of momentum and heat are calculated and it is suggested that the transverse momentum transfer, UV tends to be negative (offshore) in the region of anticyclonic shear of the upper Kuroshio; no evidence for a negative eddy viscosity effect is found.     

Southward intrusion of the intermediate Oyashio water along the east coast of the Boso Peninsula,Japan II. Intrusion events into Sagami Bay

In the previous paper (Yanget al., 1993), it was shown that there always exists the coastal salinity-minimum-layer (SML) water just off the Boso Peninsula. The coastal SML water is bounded by the current zone of the Kuroshio, and a relatively high salinity domain separates it from the offshore SML water which would be a continum of the North Pacific Intermediate Water. We suggested that the coastal SML water region indicates the pathway along which the Intermediate Oyashio Water intrudes into Sagami Bay. In this paper, by selecting seven cases where we found the coastal SML water having abnormally high oxygen content and low salinity, we try to follow the intrusion manner of the Intermediate Oyashio Water into Sagami Bay by using available hydrographic data taken routinely by various organizations in the period from 1973 to 1986. Some of these water can be traced from the observation line near the cape of Inubo to the central part of Sagami Bay, and its propagation speed along the coast is shown to be of order of 1 cm/s. The intruding intermediate Oyashio water usually has a complicated layered structure in it, and its time scale of persistence is shown to be only a few months.     

Contribution of abiogenic and biogenic particles to trace-metal composition of phytoplankton assemblages in seawater of Shimizu Port, Japan

The contribution of abiogenic and biogenic particles to trace-metal (As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb, Ti, V, and Zn) composition was investigated for phytoplankton (primarily diatoms) collected in Shimizu Port, a coastal seawater region. Except for Cd, the trace metals occurred predominantly in lithogenic or nonlithogenic abiogenic particles associated with plankton. In contrast, it is likely that Cd in seawater is taken up intracellularly, and not adsorbed extracellularly by phytoplankton. The lower P-normalized quotas of Cd in Shimizu Port than in offshore regions may be because plankton are dominated by diatoms.     

Calorimetric study of high-pressure polymorphs of MnSiO3

With increasing pressure, MnSiO₃ rhodonite stable at atmospheric pressure transforms to pyroxmangite, then to clinopyroxene and further to tetragonal garnet, which finally decomposes into MnO (rocksalt) plus SiO₂ (stishovite). High temperature solution calorimetry of synthetic rhodonite, clinopyroxene and garnet forms of MnSiO₃ was used to measure the enthalpies of these transitions. ΔH ₉₇₄ ⁰ for the rhodonite-clinopyroxene and ΔH ₂₉₈ ⁰ for the clinopyroxene-garnet transition are 520±490 and 8,270±590 cal/mol, respectively. The published data on the enthalpy of the rhodonite-pyroxmangite transition, phase equilibrium boundaries, compressibility and thermal expansion data are used to calculate entropy changes for the transitions. The enthalpy, entropy and volume changes are very small for all the transitions among rhodonite, pyroxmangite and clinopyroxene. The calculated boundary for the clinopyroxene-garnet transition is consistent with the published experimental results. The pyroxene-garnet transition in several materials, including MnSiO₃, is characterized by a relatively small negative entropy change and large volume decrease, resulting in a small positiveP – T slope. The disproportionation of MnSiO₃ garnet to MnO plus stishovite and of Mn₂SiO₄ olivine to garnet plus MnO are calculated to occur at about 17–18 and 14–15 GPa, respectively, at 1,000–1,500 K.     

Precise estimation of hourly global solar radiation for micrometeorological analysis by using data classification and hourly sunshine

We have developed a method for estimating hourly global solar radiation (GSR) from hourly sunshine duration data. This procedure requires only hourly sunshine duration as the input data and utilizes hourly precipitation and daily snow cover as auxiliary data to classify time intervals into six cases according to weather conditions. To obtain hourly GSR using a simple algebraic form, a quadratic function of the solar elevation angle and the sunshine duration ratio is used. Daily GSR is given by a sum of hourly GSRs. We evaluated the performance of the newly developed method using data obtained at 67 meteorological stations and found that the estimated GSR is highly consistent with that observed. Hourly and daily root-mean-square misfits are approximately 0.2 MJ/m²/h (~55 W/m²) and 1.4 to 1.5 MJ/m²/day (~16 to 17 W/m²), respectively. Our classification of weather conditions is effective for reducing estimation errors, especially under cloudy skies. Since the sunshine duration is observed at more meteorological stations than GSR, the proposed new method is a powerful tool for obtaining solar radiation with hourly resolution and a dense geographical distribution. One of the proposed methods, GSRgrn, can be applicable to hourly GSR estimations at different observation sites by setting local parameters (the precipitable water, surface albedo, and atmospheric turbidity) suitable to the sites. The hourly GSR can be applied for various micrometeorological studies, such as the heat budget of crop fields.     

Measuring saturated hydraulic conductivity and anisotropy of peat by a modified split-container method

Long-term changes in the physical and hydraulic properties of peat result from the decomposition and consolidation processes. The saturated hydraulic conductivity (K _s) of peat is depth-dependent and could increase or decrease with depth; therefore, K _s determination on a large number of samples is required to more accurately assess field variability. The cube method is a popular laboratory procedure to determine K _s because it allows use of smaller sample dimensions, while minimizing edge effects. This article describes the design and use of an alternate split container to enclose undisturbed peat cubes during measurement of K _s and the application of this method to a field site in Northwest Territories, Canada. The method allows for simpler and more controlled K _s measurements while also permitting anisotropy measurements. Matched tests on identical samples (K _s range 21–314 m/d), using the split-container and wax methods, showed a good agreement for intermediate K _s values; however, significant deviations occurred for low and high K _s values. Hydraulic-conductivity measurements taken on field samples showed a decrease with depth and exhibited anisotropic hydraulic conductivity as expected based on previous studies.     

Linear Stability of Thermal Convection in Rotating Systems with Fixed Heat Flux Boundaries

Linear stability of rotating thermal convection in a horizontal layer of Boussinesq fluid under the fixed heat flux boundary condition is examined by the use of a vertically truncated system up to wavenumber one. When the rotation axis is in the vertical direction, the asymptotic behavior of the critical convection for large rotation rates is almost the same as that under the fixed temperature boundary condition. However, when the rotation axis is horizontal and the lateral boundaries are inclined, the mode with zero horizontal wavenumber remains as the critical mode regardless of the rotation rate. The neutral curve has another local minimum at a nonzero horizontal wavenumber, whose asymptotic behavior coincides with the critical mode under the fixed temperature condition. The difference of the critical horizontal wavenumber between those two geometries is qualitatively understood by the difference of wave characteristics; inertial waves and Rossby waves, respectively.