Anisotropy of Mg isotopic fractionation during evaporation and Mg self-diffusion of forsterite in vacuum

Evaporation of solid materials under low-pressure conditions could play important roles in chemical and isotopic fractionations in the early solar system. We have studied anisotropy of isotopic fractionation of ²⁶Mg and ²⁵Mg during kinetic evaporation of forsterite (Mg₂SiO₄), which is potentially a powerful tool to understand thermal histories of crystals in the early solar system. Ion-microprobe depth profiling revealed that the Mg isotopic zoning profiles of forsterite evaporated at 1500-1700 °C are notably differing along the a-, b-, and c-axes, which can be attributed to anisotropy in self-diffusion coefficient of Mg (D) and an isotopic fractionation factor for evaporation of Mg (α). The D and α were obtained from zoning profiles by applying the diffusion-controlled isotopic fractionation model of Wang et al. [1999. Evaporation of single crystal forsterite: Evaporation kinetics, magnesium isotope fractionation, and implications of mass-dependent isotopic fractionation of a diffusion-controlled reservoir. Geochim. Cosmochim. Acta 63(6), 953-966.].The D is largest and smallest along the a- and c-axes, respectively. The activation energy of 560-670 kJ/mol indicates that Mg diffusion at 1500-1700 °C occurred in the intrinsic diffusion regime.The α seems to be larger along the a- or c-axes than along the b-axis. The α along the a- or c-axes show weak temperature dependence. The α along all the crystallographic orientations is closer to unity than that expected from the kinetic theory of gases. These lines of evidence suggest that surface processes such as breaking of bonds and surface diffusion are responsible for the isotopic fractionation.     

Accelerated continental-scale snowmelt and ecohydrological impacts in the four largest Siberian river basins in response to spring warming

River runoff from the four largest Siberian river basins (the Ob, Yenisei, Lena, and Kolyma) considerably contributes to freshwater flux into the Arctic Ocean from the Eurasian continent. However, the effects of variation in snow cover fraction on the ecohydrological variations in these basins are not well understood. In this study, we analysed the spatiotemporal variability of the maximum snow cover fraction (SCF_max) in the four Siberian river basins. We compared the SCF_max from 2000 to 2016 with data in terms of monthly temperature and precipitation, night-time surface temperatures, the terrestrial water storage anomaly (TWSA), the normalised difference vegetation index (NDVI), and river runoff. Our results exhibit a decreasing trend in the April SCF_max values since 2000, largely in response to warming air temperatures in April. We identified snowmelt water as the dominant control on the observed increase in the runoff contribution in May across all four Siberian river basins. In addition, we detected that the interannual river runoff was predominantly controlled by interannual variations in the TWSA. The NDVI in June was strongly controlled by the timing of the snowmelt along with the surface air temperature and TWSA in June. The rate of increase in the freshwater flux from the four Siberian rivers decreased from 2000 to 2016, exhibiting large interannual variations corresponding to interannual variations in the TWSA. However, we identified a clear increase trend in the freshwater flux of ~4 km³/year when analysing the long-term 39-year historical record (1978–2016). Our results suggest that continued global warming will accelerate the transition towards the earlier timing of snowmelt and spring freshwater flux into the Arctic Ocean. Our findings also highlight the effects of earlier snowmelt on ecohydrological changes in the Northern Hemisphere.     

Initial rupture process of microearthquakes recorded by high sampling borehole seismographs at the Nojima fault, central Japan

We analyze high sampling waveforms of the initial part of P-wave recorded at the 1800-m-deep borehole seismographs at the Nojima fault from December 1999 to May 2000 to clarify the initial rupture process of microearthquakes. We select 12 events with high S/N, whose magnitudes range from −0.3 to 2.2 and hypocentral distances from 1 to 11 km. We adopt the two different source models by Sato and Hirasawa (1973) and by Sato and Kanamori (1999). The former (model by Sato and Hirasawa (SH model)) generates only a ramp-like onset of velocity pulse. The later (model by Sato and Kanamori (SK model)) is able to generate a weak initial phase that is controlled by a trigger factor and the length of pre-existing crack. We perform the waveform inversion to estimate the optimum source parameters of each model. Waveforms of 5 of the 12 events are clearly reproduced by both SH model and SK model with a large trigger factor and a small length of pre-existing crack. The others are explained by not SH model but only SK model with a small trigger factor and a large length of the pre-existing crack, indicating that the weak initial phase is a nucleation phase and reflects the source process. These seven events satisfy roughly a relation that a large event has a large length of the pre-existing crack; the final crack length is proportional to the length of the pre-existing crack.     

Optimal placement of sensors on buildings subjected to intermediate‐storey excitation according to QN control method

An algorithm to calculate direct velocity feedback gain with limited number of sensors is developed in a simple way such that a certain performance index is minimized according to QN control method. If a limited number of velocity outputs can be measured, full velocity responses of the whole structure can be interpolated based on the mode shapes. By defining the performance index function as a combination of the structure's velocity responses and control forces only, feedback gain can be determined according to QN control method with the external excitation being taken into account throughout the entire algorithm. Control forces are then regulated by the time‐invariant feedback gain matrix. The effective location of the active control devices for a building structure subjected to intermediate‐storey excitation has been determined to be in the three floors adjacent to the vibration source. Hence for the purpose of this paper, only the optimal placement of sensors is verified. It is shown in this paper that if the dynamic behaviour of the structure is well described by a mathematical model, sufficient response reduction effect can be achieved according to the new DVFC algorithm, and the degradation of control performance due to time delay can also be verified. Copyright © 2001 John Wiley & Sons, Ltd.     

hoxY基因的克隆及其在节旋藻和螺旋藻系统学研究的应用

从节旋藻属5个品系和螺旋藻属1个品系中克隆了hoxY基因的部分序列.序列长度都是479bp.在节旋藻中该基因GC含量为46.0%～46.6%,螺旋藻中为43.5%.节旋藻各品系间序列的相似性介于93.7%～100%,明显高于节旋藻属和螺旋藻属间的序列相似性（69.5%～72.2%）.2个属中镍铁氢化酶小亚基HoxY氨基酸序列的比较也表明螺旋藻和节旋藻之间存在较大差异.利用MEGA2通过比较核酸序列构建了系统树,表明螺旋藻和节旋藻属处于不同的分枝.     

A low cost meteor observation system using radio forward scattering and the interferometry technique

We present a low cost meteor observation system based on the radio forward scattering and interferometry technique at Kochi University of Technology (KUT). The system can be a suitable model for low budget educational institutes that target practical learning of astronomical objects and upper atmospheric characteristics. The system methodology for the automatic counting of meteor echoes, filtering noise and detecting meteor echo directions is described. Detection of the meteor echo directions, which is the basic element for determining the meteor trajectories and the orbital parameters of parent comets, is based on a software system developed for analysis of phase differences detected by interferometry. Randomly selected observation samples measured by the radio interferometer are compared to simultaneous optical observations by video cameras to verify the system accuracy. Preliminary error analysis revealed that the system accuracy is directly related to the duration of observed meteor echoes. Eighty percent of meteor echo samples with durations longer than 3 s showed agreement in azimuth and elevation angles measurements to within a 10° error range, while meteor echo samples with shorter durations showed lower agreement levels probably due to the low system sampling resolution of 0.1 s. The reasonable agreement level of meteor echoes with duration longer than 3 s demonstrated the applicability of the system methodology. Accurate observation of shorter duration meteor echoes could possibly be achieved by improving the system resolution.     

Using trace elements in skin to discriminate the populations of minke whales in southern hemisphere

Concentrations of 12 trace elements (V, Cr, Mn, Cu, Zn, Se, Rb, Sr, Cd, Cs, Ba, and Hg) were determined in liver and skin tissues of minke whales from various regions within the Antarctic Ocean. Cd concentrations in livers of southern minke whale were apparently higher than those in cetaceans from other regions, while Hg concentrations were lower. There were significant positive correlations between body length and concentrations of Cd and Hg in the liver. The concentrations of all trace elements in the skin were lower than those in other cetaceans reported previously. Significant positive correlations between liver and skin were found for Cr, Mn, Cu, Zn, Rb, Cd, and Cs, implying that the concentrations of these trace elements in the skin reflect those of internal organs. Large interannual variation of the accumulation pattern of trace elements in the skin was observed for the southern minke whales from Area V. There were significant differences in the skin element concentrations among Areas III, IV, and V, especially for males. Also, discriminant analysis between geographically two different groups collected during 1995/1996 austral summer season, based on the concentrations of trace elements in the skin, allowed for a correct classification of 90% of these minke whales. These results suggest that measurement of trace elements in skin samples could provide valuable information on the status of contamination and possible geographic differences in the accumulation levels in southern minke whales.     

Molecular cloning and mRNA expression of cytochrome P4501A1 and 1A2 in the liver of common minke whales (Balaenoptera acutorostrata)

This study presents full-length cDNA sequences of CYP1A1 and 1A2, in common minke whale (Balaenoptera acutorostrata) from the North Pacific. Both CYP1A1 and CYP1A2 cDNAs had an open reading frame of 516 amino acid residues, and predicted molecular masses were 58.3 kDa and 58.1 kDa, respectively. The deduced full-length amino acid sequence of CYP1A1 revealed higher identities with those of sheep (86%) and pig (87%), and that of CYP1A2 was most closely related to human (82%) and monkey CYP1A2 (82%) among species from which CYP1A2 has been isolated so far. Differences in certain conserved and functional amino acid residues of CYP1A1 and 1A2 between common minke whale and other mammalian species indicate the possibility of their specific metabolic function. Concentrations of organochlorine compounds (OCs) including PCBs and DDTs analyzed in common minke whale liver showed no significant correlation with hepatic mRNA expression levels of CYP1A1 and CYP1A2, indicating no induction of these enzymes by such OCs.     

Effect of helix bending deflection on load settlement behaviour of screw pile

A screw pile has higher end bearing capacity than any other straight pipe piles due to its larger helix with respect to central shaft. However, larger helices are not frequently used as it will bend and may reduce the actual bearing capacity of the ground. In the present study, the effect of helix bending deflection on the load settlement behaviour and ultimate bearing capacity is investigated. To achieve the objectives, model scale pile load tests were conducted. The effect of helix bending on the load settlement behaviour at higher stress level was also investigated in this research. The helices with different helix-to-shaft-diameter ratios and thicknesses were used, so that clear difference of deformed and non-deformed screw piles in the load settlement behaviour can be observed. Dry Toyoura sand in dense state was used as a model ground. It is observed from test results that the helix bending deflection starts affecting the load settlement behaviour of the ground if it is more than the critical helix bending deflection. The ratio of critical helix bending deflection to outstand length decreases with increase in helix-to-shaft-diameter ratio, and its relationship is presented in this study. It is also observed that the Roark’s formula for flat circular plate having uniform load over a very small circular area with fixed outer edges showed good agreement with the measured helix bending deflection. In order to estimate the optimum helix thickness, the well-agreed equation is also modified with respect to critical helix bending deflection.