数值模拟技术在海坨子油田开发调整研究中的应用

讨论分析数值模拟技术在海坨子油田开发调整研究中的思路和方法,采用美国Landmark公司VIP2003．4版本数值模拟软件包进行模拟研究,通过参数准备,静、动态拟合,模拟出海坨子油田海S9—11井组1—9砂组各小层剩余储量大小及不同阶段流体饱和度分布,结合可视化技术形象描述了海坨子油田剩余油变化规律及潜力区,在此基础上预测不同井网加密方式开发指标,并优选出最佳方案,为海坨子油田下步开发调整提供了重要依据,取得了较好的效果。     

基于GIS的北京城市形态研究

经典的城市形态理论包括同心圆理论、扇形理论和多核心理论.利用2002年北京市土地利用图,采用GIS缓冲区分析的方法,分析了北京市各功能用地的方向特征和圈层特征.结果表明:北京市的土地利用体现了明显的圈层特征,同时各类功能用地在各方向的分布又明显受到了河流、交通干道和工业区等地理要素的影响.北京没有形成城市总体规划的多中心布局,第一道绿化隔离地区中绿地面积没有明显高出其他地区,基本上已经失去了中心城区和边缘集团隔离开的功能.总体上,北京城市空间形态主要是同心圆和扇形的结合,更接近同心圆理论和扇形理论的混合形式.     

江苏固城湖流域1951-2000年农业非点源氮、磷输移的数值模拟研究

选择位于长江下游的固城湖流域作为研究区域,基于分布式流域水文模型SWAT,采用数值模拟的手段,反演了1951～2000年流域农业非点源氮、磷的输移规律。模拟结果与实测值的一致性反映了模型的良好模拟能力。比较两个时段的模拟结果发现,1981～2000年,流域农业非点源氮、磷年平均浓度和输移量分别为:总氮0.82mg/L和411.88×103kg/a,总磷0.084mg/L和43.04×103kg/a;远高于1951～1960年的氮、磷年平均浓度和输移量分别为:总氮0.22mg/L和49.55×103kg/a,总磷0.036mg/L和7.67×103kg/a。模拟主要反映了流域下垫面条件和农作物耕作模式对农业非点源氮、磷浓度及输移量的影响。     

甘肃省文县阳山超大型金矿床成矿作用及成矿模式

阳山金矿床位于甘肃省文县.区域构造演化分析、成矿年代学研究及野外地质观察表明,矿区岩浆岩与金成矿在空间及时间上均存在密切关系.通过对阳山地区区域地层成矿元素含量及阳山金矿各类矿石元素含量分析,确定泥盆系三河口组地层为阳山金矿床的矿源层.进一步研究矿床稀土元素、稳定同位素、流体包裹体等测定结果,认为阳山金矿成矿物质来源复杂,具地层和岩浆岩双重来源;成矿热液具有岩浆热液、变质热液以及大气降水多种来源.自三叠纪以来,与区域构造演化有关的多次岩浆热液活动与阳山金矿成矿作用存在密切相关.综合分析认为,阳山金矿床成矿作用是多期岩浆热液活动叠加的复合成矿作用.在此基础上提出了阳山金矿床的成矿模式.     

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China’s Coal

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.     

中国滑坡预测预报研究综述

滑坡预测预报是有效预防滑坡灾害的重要途径之一,这方面的研究不仅受到广泛重视,且硕果累累。将中国滑坡预测预报的研究历史划分为四个阶段：① 经验判断——被动防灾避灾阶段;② 定性——半定量分析预测预报阶段;③ 理论方法探索——检验预测预报阶段;④ 理论方法深化——综合应用预测预报阶段。从监测（观测）方法、预测预报方法,以及研究特点等方面进行简要回顾,总结已有监测方法（手段）、预测预报理论、方法的研究现状,认为尚存在：① 监测方法（手段）,包括仪器、设备的精度不足;② 预测预报方法综合性、实用性不强;③ 预测预报专门理论尚待完善等问题。在分析的基础上,提出自己的观点,并进行了发展趋势展望。     

框架预应力锚杆边坡支护结构的稳定性分析方法及其 应用

以边坡极限平衡理论及框架预应力锚杆边坡支护结构的圆弧滑动破坏模式为基础,在考虑框架、锚杆对土体边坡稳定性影响的情况下,基于圆弧滑动条分法的思想利用积分法建立了内部稳定性安全系数计算模型和最危险滑移面搜索模型。确定滑移面圆心坐标为几何控制参数,推导了安全系数计算模型中各变量与滑移面圆心坐标之间的函数关系式,从而获得了滑移面几何控制参数与内部稳定性安全系数之间的函数关系。利用网格法对框架预应力锚杆支护结构最危险滑移面的圆心坐标进行动态搜索和求解。最后采用Matlab语言编制了框架预应力锚杆边坡支护结构的稳定性分析程序,并结合工程实例进行了验算,讨论了此种方法的适用条件,结果表明该方法简明适用,较传统的经验分析方法更加合理。     

刚-柔性桩复合地基变形特性有限元分析

在现场试验基础上对条形基础下刚-柔性桩复合地基进行有限元模拟分析。着重讨论了褥垫层、承台、刚性桩、柔性桩等的参数变化对刚-柔性桩复合地基沉降特性的影响。结果表明,复合地基沉降随着褥垫层厚度减小而减小,随着褥垫层模量增加而减小,承台厚度增加有利于减少差异沉降,刚性桩是控制沉降的主要构件,柔性桩桩长增加可以减少差异沉降。分析结果为刚-柔性桩复合地基的优化设计提供理论基础。     

滇东南岩溶区地质灾害发育分布规律及其防治对策——以文山县为例

云南省文山县地质灾害类型多样,以滑坡、崩塌为主,不稳定斜坡、泥石流次之,岩溶塌陷零星分布.本文在结合实地调查的基础上,经过分析总结,详细阐述了文山县地质灾害的类型、数目和发育分布特征.最后,针对文山县的具体情况,提出了地质灾害防治的若干建议,为该县的防灾、减灾和促进区域经济社会可持续发展提供科学依据.     

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing‐Shenfu Area

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.