Importance of the mixed-phase cloud distribution in the control climate for assessing the response of clouds to carbon dioxide increase: a multi-model study

We have conducted a multi-model intercomparison of cloud-water in five state-of-the-art AGCMs run for control and doubled carbon dioxide climates. The most notable feature of the differences between the control and doubled carbon dioxide climates is in the distribution of cloud-water in the mixed-phase temperature band. The difference is greatest at mid and high latitudes. We found that the amount of cloud ice in the mixed phase layer in the control climate largely determines how much the cloud-water distribution changes for the doubled carbon dioxide climate. Therefore evaluation of the cloud ice distribution by comparison with data is important for future climate sensitivity studies. Cloud ice and cloud liquid both decrease in the layer below the melting layer, but only cloud liquid increases in the mixed-phase layer. Although the decrease in cloud-water below the melting layer occurs at all latitudes, the increase in cloud liquid in the mixed-phase layer is restricted to those latitudes where there is a large amount of cloud ice in the mixed-phase layer. If the cloud ice in the mixed-phase layer is concentrated at high latitudes, doubling of carbon dioxide might shift the center of cloud water distribution poleward which could decrease solar reflection because solar insolation is less at higher latitude. The magnitude of this poleward shift of cloud water appears to be larger for the higher climate sensitivity models, and it is consistent with the associated changes in cloud albedo forcing. For the control climate there is a clear relationship between the differences in cloud-water and relative humidity between the different models, for both magnitude and distribution. On the other hand the ratio of cloud ice to cloud-water follows the threshold temperature which is determined in each model. Improved measurements of relative humidity could be used to constrain the modeled representation of cloud water. At the same time, comparative analysis in global cloud resolving model simulations is necessary for further understanding of the relationships suggested in this paper.     

Associations of organic matter with minerals in Tagish Lake meteorite via high spatial resolution synchrotron‐based FTIR microspectroscopy

We have investigated spatial and spectral associations between mineral species and organic matter in the Tagish Lake meteorite. Synchrotron‐based infrared microspectroscopy allowed us to spatially locate specific organic and inorganic compounds within multiple Tagish Lake grains with high spatial resolution. Generated two‐dimensional infrared maps present strong spatial association between aliphatic C‐H and OH in phyllosilicates in Tagish Lake grains. These observations indicate possible roles of phyllosilicates for the formation, evolution, and preservation of organic matter. Infared spectra of all studied Tagish Lake grains show a strong carbonate band, which also shows a weak but positive correlation with organic matter in some grains. However, intergrain correlation was not observed between carbonates and organics, which is likely due to the difference of carbonate occurrence, e.g., presence of larger grains or intergrowth of carbonates on phyllosilicates. Possible scenarios further explaining the observed associations of organics with phyllosilicates and carbonates are presented.     

Effects of ulvoid (Ulva spp.) accumulation on the structure and function of eelgrass (Zostera marina L.) bed

The objective of this study is to clarify the effect of ulvoid (Ulva spp.) accumulation on the structure and function of an eelgrass bed by the coast of Iwakuni, Seto Inland Sea, Japan. We monitored eelgrass shoot density and volume of ulvoid accumulation in the study site and evaluated effects of the accumulated ulvoid canopy on the percent survival, seedling density, growth rates, photosynthetic photon flux density (PPFD) and carbon contents of eelgrass. Eelgrass shoot density decreased by the accumulation of ulvoid. Also, seedling density decreased by the increase in the ulvoid volumes. Shoot density, seedling density and leaf elongation were negatively correlated with ulvoid volume. Carbon contents in eelgrass decreased by the accumulation of ulvoid (canopy height: 25cm). These results suggest that accumulation of ulvoid bloom has significant negative impacts on the structure and function of eelgrass bed, i.e. decreases in vegetative shoot density, seedling density, shoot height and growth rate.     

Empirical ocean-color algorithms to retrieve chlorophyll-a, total suspended matter, and colored dissolved organic matter absorption coefficient in the Yellow and East China Seas

A bio-optical dataset collected during the 1998?C2007 period in the Yellow and East China Seas (YECS) was used to provide alternative empirical ocean-color algorithms in the retrieval of chlorophyll-a (Chl-a), total suspended matter (TSM), and colored dissolved organic matter (CDOM) absorption coefficients at 440 nm (ag₄₄₀). Assuming that remote-sensing reflectance (Rrs) could be retrieved accurately, empirical algorithms for T_Chl (regionally tuned Tassan??s Chl-a algorithm) in case-1 waters (T_Chl2i in case-2 waters), T_TSM (regionally tuned Tassan??s TSM algorithm), and T_ag440 or C_ag440 (regionally tuned Tassan??s or Carder??s ag₄₄₀ algorithm) were able to retrieve Chl-a, TSM, and ag₄₄₀ with uncertainties as high as 35, 46, and 35%, respectively. Applying the standard SeaWiFS Rrs, T_Chl was not viable in the eastern part of the YECS, which was associated with an inaccurate SeaWiFS Rrs retrieval because of improper atmospheric correction. T_Chl behaved better than other algorithms in the turbid case-2 waters, although overestimation was still observed. To retrieve more reliable Chl-a estimates with standard SeaWiFS Rrs in turbid water (a proxy for case-2 waters), we modified T_Chl for data with SeaWiFS normalized water-leaving radiance at 555 nm (nLw₅₅₅) > 2 mW cm^?2 ??m^?1 sr^?1 (T_Chl2s). Finally, with standard SeaWiFS Rrs, we recommend switching algorithms from T_Chl2s (for case-2 waters) to MOC_Chl (SeaWiFS-modified NASA OC4v4 standard algorithm for case-1 waters) for retrieving Chl-a, which resulted in uncertainties as high as 49%. To retrieve TSM and ag₄₄₀ using SeaWiFS Rrs, we recommend empirical algorithms for T_TSM (pre-SeaWiFS-modified form) and MT_ag440 or MC_ag440 (SeaWiFS Rrs-modified forms of T_ag440 or C_ag440). These could retrieve with uncertainties as high as 82 and 52%, respectively.     

Lower Cd/P ratio in settling particles than in surface seawater in the Okinawa Trough

The characteristics of the ratios between cadmium (Cd) and phosphorus (P) in settling particles collected from the Okinawa Trough in the East China Sea were examined using a sediment trap, moored at a depth of 811 m for one year. The Cd/P ratios varied within a narrow range throughout the year, in spite of the large seasonal change in the total dry mass, Cd, and P fluxes. The average Cd/P ratio of settling particles was 0.062 (nmol/μmol), which was obviously lower than that of surface seawater around the study site (0.16). This lower ratio in the Okinawa Trough particles collected using the 811 m-moored trap certainly reflected the mixture of biologically produced organic matter around the study site and other components that were mainly transported as lateral flux from the shelf edge and slope area of the East China Sea.     

Infrared imaging spectroscopy with micron resolution of Sutter's Mill meteorite grains

Synchrotron‐based Fourier transform infrared spectroscopy and Raman spectroscopy are applied with submicrometer spatial resolution to multiple grains of Sutter's Mill meteorite, a regolith breccia with CM1 and CM2 lithologies. The Raman and infrared active functional groups reveal the nature and distribution of organic and mineral components and confirm that SM12 reached higher metamorphism temperatures than SM2. The spatial distributions of carbonates and organic matter are negatively correlated. The spatial distributions of aliphatic organic matter and OH relative to the distributions of silicates in SM2 differ from those in SM12, supporting a hypothesis that the parent body of Sutter's Mill is a combination of multiple bodies with different origins. The high aliphatic CH₂/CH₃ ratios determined from band intensities for SM2 and SM12 grains are similar to those of IDPs and less altered carbonaceous chondrites, and they are significantly higher than those in other CM chondrites and diffuse ISM objects.     

Single particle analysis of oceanic suspended matter during the SEEDS II iron fertilization experiment

Suspended particles collected from surface seawater during the SEEDS II (Subarctic Iron Experiment for Ecosystem and Dynamics Study II) experiment were analyzed individually using an electron probe X-ray micro analyzer and characterized by size and elemental composition. Their numbers, relative abundances, and relative particle volume all showed clear differences between samples collected inside vs. outside the phytoplankton bloom that developed following the addition of iron. Throughout the study, Si-rich, Ca-rich and Organic particles were dominant and their number increased inside the fertilized patch; these particles accounted for 21%, 13% and 58% of the particles examined, respectively. Si-rich or Ca-rich particles commonly consisted of fragments of diatom frustules and coccolithophorids. There was consistently greater percentage of Ca-rich particles and lower percentage of Si-rich particles inside the patch than outside of it in number, but both types of these particles apparently occupied a larger volume inside the patch than outside of it. Organic particles, that showed having peaks in smaller diameter particles, increased apparently inside the patch with time after iron fertilization. The Organic particles had a more diverse mixture of both bio-related and crustal trace elements than the other types of particles. These results suggest that the increase in suspended particles following the iron enrichment was due to a combination of detrital material and live phytoplankton.     

Rapid contamination during storage of carbonaceous chondrites prepared for micro FTIR measurements

Abstract— Organic contamination (?2965 and ?1260 cm^?1peaks) was found on Tagish Lake (C2) and Murchison (CM2) carbonaceous chondrites containing abundant hydrous minerals by Fourier transform infrared (FTIR) microspectroscopy on the samples pressed on Al plates. On the other hand, anhydrous chondrite (Moss, CO3) was not contaminated. This contamination occurred within one day of storage, when the samples pressed on Al were stored within containers including silicone rubber mats. Volatile molecules having similar peaks to the contaminants were detected by long‐path gas cell FTIR measurements for the silicone rubber mat. Rapid adsorption of the volatile contaminants also occurred when silica gel and hydrous minerals such as serpentine were stored in containers including silicone rubber, silicone grease, or adhesive tape. However, they did not show any contamination when stored in glass and polystyrene containers without these compounds. Therefore, precious astronomical samples such as meteorites, interplanetary dust particles (IDPs), and mission‐returned samples from comets, asteroids, and Mars, should be measured by micro FTIR within one day of storage in glass containers without silicone rubber, silicone grease, or adhesive tape.     

Characterization of particle size and settling velocity of cohesive sediments affected by a neutral exopolymer

In natural waters,exopolymers or extracellular polymeric substances(EPS) exuded by microorganisms interact with clay particles,resulting in the flocculation of clays and hence alteration to the properties of suspended cohesive sediments.To investigate and further understand how neutral EPS affect cohesive sediment transport and the final sediment yield,an experimental study was conducted on laboratory-prepared clay and guar gum(used as an analog for neutral EPS) suspensions to characterize EPS-induced flocculation and the settling velocity of resultant floes.Four different clays consisting of kaolinite,illite,Ca-montmorillonite,and Na-montmorillonite were studied to examine the influence of different layer charges on clay flocculation induced by neutral EPS.Floc size was determined by a laser particle size analyzer,and settling velocity estimated by analyzing the time-series floc settling images captured by an optical microscope.Results indicate that neutral EPS promote clay-EPS flocculation for all four clays with the particle/floc size significantly increased from～0.1-60μm to as large as～600μm.Clays’ layer charge has a profound influence on the clay-EPS flocculation.With the same floc size,the settling velocity of clay-EPS flocs is typically smaller than that of pure clay flocs,which is attributed to the reduced density of flocs caused by the EPS. However,for flocs of the same composition(e.g.pure clay or hybrid clay-EPS mixture),the settling velocity increases with size.The fractal dimension of these clay-EPS flocs estimated from settling velocity ranges from 1.39 to 1.47,which are smaller than that of pure clay flocs,indicating that these flocs are less compacted than the pure clay flocs.     

Polymetallic Mineralization at the Nakakoshi Copper Deposits, Central Hokkaido, Japan

Abstract: Polymetallic mineralization at the Nakakoshi deposits, Kamikawa town, central Hokkaido, occur as fracture-filling veins in Cretaceous slate of the Hidaka Supergroup. Ten veins have been recognized in NE-SW and E-W directions. Sericite in altered slate which is the host of the deposits, was dated at 31. 1 Ma, Oligocene in age.
No. 9 vein consists of massive chalcopyrite ore with various kinds of minerals such as pyrite, pyrrhotite, arsenopyrite, sphalerite, tetrahedrite, Ag-minerals and Cu–Zn–Fe–In–Sn–S minerals, quartz and sericite. Chalcopyrite and pyrite contain sphalerite star and sphalerite with chalcopyrite emulsions. Maximum indium contents of sphalerite and the Cu–Zn–Fe–In–Sn–S minerals are 1. 8 and 16. 3 wt%, respectively. The sulfur isotopic ratios, δ³⁴S of ore minerals, range from –12. 9 to –9. 6%. Formation temperatures of the sulfide minerals are estimated as 300–500°C, based on the paragenesis and chemical compositions of the minerals.