从叶绿素a的变化浅析西湖综合保护工程效益(1998-2007年)

自1998年以来,杭州市政府先后实施了西湖疏浚、湖西综合保护、引配水改建等几项主要治理工程,西湖周边的环境质量得到了明显提高.对1998-2007年间杭州西湖主要湖区叶绿素a的含量进行了跟踪监测分析与研究,结果表明,西湖主要湖区年均叶绿素a含量比治理工程实施前明显下降,且下降幅度可达42.8%-87.3%,西湖综合保护工程的实施对改善西湖的水质起了主要的作用.     

Estimating the sustainable lobster (Panulirus ornatus) catch in Torres Strait,Australia, using an age-structured stock assessment model

The ornate rock lobster (Panulirus ornatus) is distributed across Torres Strait between Australia and Papua New Guinea and supports the most important commercial fishery to Islanders in the region. The long-term sustainability of the fishery is of importance not only to local island communities but also to the bilateral relationship between the two countries. In this paper, we developed an age-structured fishery model to assess the current stock status and estimate the long-term sustainable catch. The model was fitted to catch statistics and survey-based population estimates through a weighted maximum likelihood approach. Natural mortality was estimated at 0.732 yr⁻¹, and fishing mortality ranged from 0.19 to 0.65 yr⁻¹ from 1989 to 2005. The maximum sustainable yield was estimated at about 640 tonnes whole weight with a corresponding fishing mortality of 0.5 yr⁻¹. A stock–recruitment model was established based on outputs of the stock assessment model. To obtain the maximum sustainable yield, spawning stock should be maintained at 120×10⁴ lobsters. The lobster spawning stock has been fished down below this level twice since 1989, in 1999 and 2002, and was higher than this level in 2004 and 2005. These results suggest that the Torres Strait lobster stock is not over-fished and that the current harvest strategy is likely to maintain the stock at or above the level that would support the maximum sustainable yield if the current cap on fishing effort remains in place.     

Three‐dimensional receiver deghosting of seismic streamer data using L1 inversion and redundant extended radon dictionary

In this paper, we propose a novel three‐dimensional receiver deghosting algorithm that is capable of deghosting both horizontal and slanted streamer data in a theoretically consistent manner. Our algorithm honours wave propagation phenomena in a true three‐dimensional sense and frames the three‐dimensional receiver deghosting problem as a Lasso problem. The ultimate goal is to minimise the mismatch between the actual measurements and the simulated wavefield with an L1 constraint applied in the extended Radon space to handle the underdetermined nature of this problem. We successfully demonstrate our algorithm on a modified three‐dimensional EAGE/SEG Overthrust model and a Red Sea marine dataset.     

基于2014年云南地区地震的地震预警参数与快速震级估算研究

根据2014年云南地区M6.1盈江地震、M6.5鲁甸地震和M6.6景谷地震的主震、余震P波初期部分的信息,研究了地震震级快速估算中3个预警参数（最大卓越周期τ_p^max、特征周期τ_c和最大位移幅值P_d）与震级的相关性,提出了云南地区的震级估计模型,并对其进行分析,再和其它地区的震级估计模型进行对比和评价。结果表明:3种方法均能在短时间内（2~4 s）有效地进行震级估算,P_d方法估算效果最优,τ_c方法次优,τ_p^max方法较弱。在震级较大的主震震级估计中,3种方法均没有出现明显的震级低估（震级饱和）现象。对于τ_p^max方法,云南地区的估计模型与南加州地区较为接近,但与四川地区区别较大,可能与该方法的计算稳定性有关;而τ_c方法的估计模型则与四川及世界其它地区均较为接近,更具有普适性和稳定性。在地震预警系统的实际应用中,由于云南地区尚未建立密集的地震监测台网系统,因此在短时间内难以得到较为准确的震中距。与震源距相独立的τpmax和τc两种算法则显得较为实用,其中:τ_c方法略优于τ_p^max方法,同时能较好地满足地震预警系统的精度要求,因此推荐使用τc方法应用于云南地区地震预警系统中的快速震级估算。     

A two‐phase automatic static correction method

Statics are an effective approach to correct for complex velocity variations in the near surface, but so far, to a large extent, a general and robust automatic static correction method is still lacking. In this paper, we propose a novel two‐phase automatic static correction method, which is capable of handling both primary wave statics (PP statics) and converted‐wave statics (S‐wave statics). Our method is purely data driven, and it aims at maximizing stacking power in the target zone of the stack image. Low‐frequency components of the data are analysed first using an advanced genetic algorithm to estimate seed statics and the time structure for an event of interest, and then the original full‐band data are further aligned via the back‐and‐forth coordinate descent method using the seed statics as initial values and the time structure for event alignment guidance. We apply our new method to two field datasets, i.e., one for 2D PP static correction and the other for 3D S‐wave static correction.     

Research Note: Near‐surface layer replacement for sparse data: is interpolation needed?

Near‐surface problem is a common challenge faced by land seismic data processing, where often, due to near‐surface anomalies, events of interest are obscured. One method to handle this challenge is near‐surface layer replacement, which is a wavefield reconstruction process based on downward wavefield extrapolation with the near‐surface velocity model and upward wavefield extrapolation with a replacement velocity model. This requires, in theory, that the original wavefield should be densely sampled. In reality, data acquisition is always sparse due to economic reasons, and as a result in the near‐surface layer replacement data interpolation should be resorted to. For datasets with near‐surface challenges, because of the complex event behaviour, a suitable interpolation scheme by itself is a challenging problem, and this, in turn, makes it difficult to carry out the near‐surface layer replacement. In this research note, we first point out that the final objective of the near‐surface layer replacement is not to obtain a newly reconstructed wavefield but to obtain a better final image. Next, based upon this finding, we propose a new thinking, interpolation‐free near‐surface layer replacement, which can handle complex datasets without any interpolation. Data volume expansion is the key idea, and with its help, the interpolation‐free near‐surface layer replacement is capable of preserving the valuable information of areas of interest in the original dataset. Two datasets, i.e., a two‐dimensional synthetic dataset and a three‐dimensional field dataset, are used to demonstrate this idea. One conclusion that can be drawn is that an attempt to interpolate data before layer replacement may deteriorate the final image after layer replacement, whereas interpolation‐free near‐surface layer replacement preserves all image details in the subsurface.     

基于机载LiDAR数据的建筑物轮廓提取

建筑物轮廓作为建筑物三维重建的重要元素,在建立智慧城市和数字城市中至关重要。本文针对从机载激光雷达点云中提取建筑物轮廓数据处理的点云滤波、建筑物屋顶面提取、建筑物轮廓提取,以及提取精度评定各环节存在的一些问题,提出了一种综合区域生长改进算法、三维Hough变换算法和α-shape算法的建筑物轮廓提取方法。该方法在对机载LiDAR点云数据去噪的基础上,首先利用改进的区域生长算法滤波地面点,并基于地物点到地面的归一化高程特征通过高度阈值去除高度较为低矮的地物点;再基于三维Hough变换算法从剩余建筑物和高大树木点云中提取建筑物平面;最后使用α-shape算法提取建筑物的轮廓信息。对使用RIEGLVQ-1560i机载激光雷达测量系统扫描的某城区点云数据进行计算,通过匹配度、形状相似度和位置精度等评价指标对提取的建筑物轮廓进行精度评定。结果表明,综合区域生长改进算法、三维Hough变换算法和α-shape算法的建筑物轮廓提取方法可以准确提取建筑物的轮廓信息,对于大范围的建筑物轮廓提取具有稳定性和普遍适用性。     

印度洋海温异常对西太平洋副热带高压的影响——大气中的两级热力适应

利用热力适应理论讨论了印度洋海温异常影响中国天气和西太平洋副热带高压异常的物理机制。结果表明 :通过第一级热力适应 ,印度洋上的海温异常形成低层气旋式环流 ,并在其东侧的偏南气流中产生对流性降水 ;然后通过第二级热力适应 ,在 50 0 h Pa上导致西太平洋副热带高压加强西伸、2 0 0 h Pa上南亚高压异常增强。从而证明两级热力适应是导致印度洋海温异常影响中国天气气候异常的重要物理机制。     

用F-K方法确定腾冲火山区震源机制*

介绍了计算理论地震图的 F- K方法在不同深度 ,不同震中距 ,不同震源类型的情况 ,表明这种方法在高频区和多层水平层状模型计算效果较好 ,适用于研究中小地震的震源机制。采用 F- K方法得到了发生在腾冲火山区的 3个地震的震源机制 ,结果表明地震 1和地震 2是走滑断裂 ,地震 3是逆断层。 3个地震的主压应力轴基本呈北西向 ,与云南地区主压应力轴方向基本吻合 ,因此 ,推断这 3个地震是构造地震。     

泸水县马垮底村易地扶贫搬迁安置中的GIS分析

探讨采用GIS的空间叠置分析、缓冲区分析等空间分析技术为移民寻找适宜居住的最佳搬迁地。在安置地选择中考虑了8个因子,通过GIS技术叠加8个因子后,在泸水县找到适宜的搬迁地,最后提出解决马垮底村脱贫的方案：条件较好的3个自然村不搬迁,就地解决脱贫;其余12个自然村搬迁到条件较好的片马镇的2个安置地。